B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO VERTICAL MULTISTAGE PUMPS - EVPM 2-4



The LEO EVPM 2-4 is a compact vertical multistage centrifugal pump designed for water pressure boosting, high-rise water supply and industrial water applications. It uses a vertical multistage hydraulic arrangement to provide higher discharge pressure while maintaining a relatively compact installation footprint.

The EVPM 2-4 is specified as a 220V single-phase pump with a 0.75 kW / 1.0 HP motor, a flow range of 16.7–67 L/min and a head range of 45–11 m. It has 1" × 1" inlet and outlet connections.

Product Specifications

Specification EVPM 2-4
Brand LEO
Product Series EVPM
Model EVPM 2-4
Pump Type Vertical Multistage Centrifugal Pump
Voltage 220V
Phase Single Phase
Motor Power 0.75 kW / 1.0 HP
Flow Range 16.7 – 67 L/min
Flow Range Approx. 1 – 4 m³/h
Head Range 45 – 11 m
Inlet Size 1"
Outlet Size 1"
Inlet / Outlet 1" × 1"
Pump Orientation Vertical
Liquid Temperature 5°C – 60°C
Maximum Altitude Up to 1,000 m
Dimensions Approx. 420 × 315 × 800 mm
Weight Approx. 20.5–21 kg
Main Application Water Supply & Pressure Boosting

The dimensions and weight reported by Malaysian product listings are approximately 420 × 315 × 800 mm and 20.5–21 kg respectively.

Hydraulic Performance

The EVPM 2-4 provides approximately 45 m maximum head at the lower end of its flow range and approximately 11 m head at the maximum published flow of 67 L/min.

Flow Rate Approx. Head
16.7 L/min 45 m
33 L/min Approx. 38–39 m
50 L/min Approx. 26–27 m
67 L/min 11 m

The actual operating point depends on the system resistance, pipework, elevation and water demand. The maximum head should therefore not be treated as the head available at maximum flow.

Key Features

• Vertical multistage centrifugal design
• 220V single-phase operation
• 0.75 kW / 1.0 HP motor
• Flow capacity up to approximately 67 L/min
• Maximum published head of approximately 45 m
• 1" × 1" inlet and outlet connections
• Compact vertical installation
• High-pressure multistage configuration
• Rotatable water inlet and outlet
• Advanced hydraulic design
• Stable operation
• High-efficiency hydraulic performance
• Cast-iron inlet and outlet with anti-rust treatment
• High-strength engineering-plastic flow-passage components
• Suitable for water pressure boosting
• Suitable for industrial and commercial water systems

Vertical Multistage Pump Design

The EVPM 2-4 uses multiple pump stages arranged vertically. Each hydraulic stage contributes to the overall pressure generated by the pump.

This arrangement allows the pump to achieve a higher head without requiring the larger horizontal footprint normally associated with some conventional pressure pumps.

The vertical configuration is particularly useful in installations where floor space is limited and a high-pressure water supply is required.

Hydraulic Construction

The EVPM series incorporates high-strength engineering-plastic components in the flow passages. The water inlet and outlet are made from cast iron with anti-rust treatment.

LEO's broader EVP documentation also identifies a stainless-steel welded shaft and engineering-plastic hydraulic components as features of the vertical multistage design.

This construction provides a practical combination of strength, corrosion resistance and relatively low pump weight for clean-water applications.

Rotatable Inlet and Outlet

One important feature of the EVPM 2-4 is the ability to rotate the water inlet and outlet to suit installation requirements.

This allows greater flexibility when connecting the pump to existing pipework and can make installation easier in restricted spaces.

The pipework should nevertheless be properly supported so that excessive mechanical load is not transferred to the pump connections.

Applications

The LEO EVPM 2-4 is suitable for:

• Domestic water supply
• Residential pressure boosting
• Main-pipe pressure boosting
• High-rise building water supply
• Multi-storey buildings
• Water tank boosting
• Commercial buildings
• Industrial water systems
• Cleaning systems
• High-pressure washing systems
• Firefighting water systems where appropriately engineered
• Pressure tank systems
• Sprinkler irrigation
• Drip irrigation
• Air-conditioning water systems
• Cooling systems
• Industrial cleaning applications

LEO identifies main-pipe and high-rise pressure boosting, industrial water systems, cleaning, high-pressure washing, firefighting, pressure tanks, sprinkler/drip irrigation, air-conditioning, cooling and industrial cleaning as applications for the EVP family.

Pressure Boosting Applications

The EVPM 2-4 is suitable when the existing water supply does not provide sufficient pressure for the downstream system.

Typical applications include:

• Increasing water pressure to upper floors
• Boosting water from a storage tank
• Improving pressure in long pipe runs
• Supplying multiple water outlets
• Supporting high-pressure cleaning equipment
• Supplying irrigation systems
• Industrial process water supply

The multistage arrangement makes the pump suitable for applications requiring higher pressure than a basic single-stage centrifugal pump.

Operating Temperature

The published EVPM 2-4 specification gives a liquid-temperature range of 5°C to 60°C and an operating altitude of up to 1,000 m.

LEO's broader EVP documentation gives different limits for some EVP configurations, so the model-specific EVPM 2-4 specification should be used when determining the actual operating limits for installation.

Suitable Fluid

The EVPM 2-4 is primarily intended for clean water and compatible liquids.

Suitable fluids/applications include:

• Fresh water
• Clean storage-tank water
• Treated water
• General service water
• Clean irrigation water
• Cooling water within the specified temperature range

It is not intended for heavily contaminated water, abrasive slurry or liquids containing significant quantities of solids unless compatibility has been specifically confirmed.

Installation Recommendations

For reliable pump operation:

• Install the pump vertically on a stable and level foundation.
• Use correctly sized suction and discharge piping.
• Keep the suction line as short and direct as practical.
• Ensure all suction connections are airtight.
• Avoid excessive suction-side restrictions.
• Support the connected pipework independently.
• Install isolation valves where required for maintenance.
• Ensure adequate water supply to the pump.
• Provide proper electrical grounding/earthing.
• Protect the motor from excessive moisture and unsuitable environmental conditions.
• Allow sufficient clearance for inspection and servicing.
• Avoid operating outside the specified hydraulic range.

Maintenance

Recommended periodic maintenance includes:

• Checking for water leakage
• Inspecting suction and discharge connections
• Checking electrical connections
• Monitoring operating pressure and flow
• Checking for unusual vibration
• Checking for abnormal noise
• Inspecting valves and pipework
• Ensuring adequate water supply
• Checking mechanical-seal condition
• Keeping the pump exterior clean
• Inspecting wear components when required

Advantages of EVPM 2-4

Higher Pressure Capability: The EVPM 2-4 provides up to approximately 45 m of head at the lower end of its published flow range.

Compact Vertical Configuration: The vertical design provides a relatively small floor footprint while allowing multiple hydraulic stages.

220V Single-Phase Operation: Suitable for installations with an appropriate 220V single-phase supply.

1.0 HP Motor: The 0.75 kW motor provides a suitable power level for domestic, commercial and selected industrial pressure-boosting applications.

Flexible Pipe Connection: The water inlet and outlet can be rotated to suit the installation arrangement.

Stable Hydraulic Performance: LEO specifies an advanced hydraulic model designed for stable operation and high efficiency.

Corrosion Protection: The cast-iron inlet and outlet receive anti-rust treatment, while engineering-plastic components are used in the hydraulic flow passages.

Product Summary

The LEO EVPM 2-4 is a 220V, 0.75 kW / 1.0 HP vertical multistage centrifugal pump with a published flow range of 16.7–67 L/min and head range of approximately 45–11 m. It features 1" × 1" connections, a compact vertical design, rotatable inlet/outlet arrangement and hydraulic components designed for stable clean-water pumping.

It is suitable for residential water supply, pressure boosting, high-rise buildings, industrial water systems, cleaning systems, irrigation and other clean-water applications.



 Inquiry - LEO VERTICAL MULTISTAGE PUMPS - EVPM 2-4