The LEO EVPM 2-6 is a vertical multistage centrifugal pump designed for clean-water supply, pressure boosting, high-rise building water systems, industrial water applications, cleaning systems and irrigation. Its vertical multistage configuration provides relatively high pressure while maintaining a compact installation footprint.
The EVPm2-6 is specified with a 1.0 kW / 1.5 HP motor. Published LEO technical data gives a flow range up to approximately 66.7 L/min and a maximum head of 69 m. The single-phase version is designated EVPm2-6, while the three-phase equivalent is EVP2-6.
Product Specifications
| Specification | EVPM 2-6 |
|---|---|
| Brand | LEO |
| Product Series | EVPM / EVP |
| Model | EVPM 2-6 |
| Pump Type | Vertical Multistage Centrifugal Pump |
| Motor Power | 1.0 kW / 1.5 HP |
| Voltage | 220–240V |
| Phase | Single Phase |
| Frequency | 50 Hz |
| Maximum Flow | 66.7 L/min |
| Maximum Flow | Approx. 4 m³/h |
| Maximum Head | 69 m |
| Nominal Flow Class | 2 m³/h |
| Number of Stages | 6 |
| Pump Orientation | Vertical |
| Inlet / Outlet | 1" × 1" class |
| Maximum Operating Pressure | 15 bar |
| Liquid Temperature | +5°C to +60°C |
| Maximum Ambient Temperature | +40°C |
| Maximum Altitude | Up to 1,000 m |
| Motor Protection | IP55 |
| Motor Insulation | Class F |
| Main Application | Water Supply & Pressure Boosting |
The 1.0 kW / 1.5 HP rating, 66.7 L/min maximum flow and 69 m maximum head are confirmed by LEO's EVP technical data. The broader EVP documentation specifies IP55 motor protection, Class F insulation, maximum 15 bar operating pressure, +4°C to +75°C liquid temperature for the broader range, and standard single-phase 220–240V supply.
Hydraulic Performance
The published EVPm2-6 performance data provides the following operating points:
| Flow Rate | Approx. Head |
|---|---|
| 0 L/min | 69 m |
| 16.7 L/min | 65 m |
| 33.3 L/min | 52 m |
| 50 L/min | 37 m |
| 66.7 L/min | 18 m |
These are pump-curve performance points. The actual operating point depends on system resistance, pipe size, elevation, valves and required water demand.
Key Features
• Vertical multistage centrifugal design
• 1.0 kW / 1.5 HP motor
• 220–240V single-phase configuration
• Six-stage hydraulic arrangement
• Maximum head up to approximately 69 m
• Maximum flow up to approximately 66.7 L/min
• Compact vertical installation
• High-pressure multistage operation
• Rotatable water inlet and outlet
• Advanced hydraulic model design
• Stable pump operation
• High-efficiency hydraulic performance
• Cast-iron water inlet and outlet with anti-rust treatment
• High-strength engineering-plastic flow-passage components
• Stainless-steel welded shaft
• Easy installation and maintenance
• Suitable for domestic, commercial and industrial clean-water applications
Vertical Multistage Construction
The EVPM 2-6 uses six hydraulic stages arranged vertically. Each stage contributes to the total pressure generated by the pump, allowing the unit to achieve a maximum head of approximately 69 m.
This configuration makes the pump suitable for applications requiring higher pressure without the larger floor area that may be required by some horizontal multistage arrangements.
The EVP series is specifically designed for pressure boosting in main pipes and high-rise buildings, as well as industrial water, cleaning, high-pressure washing, firefighting, pressure tanks and irrigation systems.
Hydraulic Construction
The EVP series incorporates high-strength engineering-plastic components in the hydraulic flow passages, together with cast-iron water inlet and outlet components receiving special anti-rust treatment. LEO also specifies a reliable stainless-steel welded shaft.
This construction provides a practical combination of strength, corrosion resistance and hydraulic efficiency for clean-water applications.
Rotatable Inlet and Outlet
The water inlet and outlet can be rotated to accommodate different installation requirements. This feature provides flexibility when connecting the pump to existing pipework or installing the pump where space is restricted.
Connected pipework should be independently supported to prevent excessive mechanical loading on the pump connections.
Applications
The LEO EVPM 2-6 is suitable for:
• Domestic water supply
• Residential water pressure boosting
• Main-pipe pressure boosting
• High-rise building water supply
• Multi-storey buildings
• Water tank boosting
• Commercial buildings
• Hotels and accommodation facilities
• Industrial water systems
• Cleaning systems
• High-pressure washing systems
• Pressure tank systems
• Sprinkler irrigation
• Drip irrigation
• Air-conditioning water systems
• Cooling-water systems
• Industrial cleaning
• General clean-water transfer
LEO officially lists main-pipe and high-rise pressure boosting, industrial water systems, cleaning systems, high-pressure washing, firefighting, pressure tanks, sprinkler and drip irrigation, air-conditioning, cooling and industrial cleaning as EVP applications.
Pressure Boosting
The EVPM 2-6 is particularly suitable where incoming water pressure is insufficient for the required downstream system.
Typical applications include:
• Increasing water pressure to upper floors
• Boosting water from storage tanks
• Improving pressure in long pipe runs
• Supplying multiple water outlets
• Supporting high-pressure cleaning equipment
• Supplying irrigation systems
• Industrial process-water supply
• Pressure tank applications
The six-stage configuration gives the EVPM 2-6 a higher pressure capability than lower-stage EVPM 2 models.
Operating Conditions
For the EVPm2-6 single-phase configuration, published technical data specifies:
• Liquid temperature: approximately +5°C to +60°C
• Maximum ambient temperature: +40°C
• Maximum operating pressure: 15 bar
• Maximum altitude: 1,000 m
• Motor protection: IP55
• Insulation class: F
LEO's broader EVP documentation gives +4°C to +75°C as the general liquid-temperature range, so the exact model-specific operating temperature should be confirmed from the pump nameplate or applicable local datasheet before installation.
Suitable Fluid
The EVPM 2-6 is primarily intended for clean water and compatible low-viscosity liquids.
Suitable applications include:
• Fresh water
• Clean storage-tank water
• Treated water
• General service water
• Clean irrigation water
• Cooling water within the specified temperature range
Do not use the pump for heavily contaminated water, abrasive slurry or liquids containing significant quantities of solids unless compatibility has been specifically confirmed.
Installation Recommendations
For reliable operation:
• Install the pump vertically on a stable foundation.
• Use correctly sized suction and discharge piping.
• Keep the suction line as short and direct as practical.
• Ensure suction connections are airtight.
• Avoid excessive restrictions on the suction side.
• Support connected pipework independently.
• Install suitable isolation valves for maintenance.
• Ensure adequate water supply to the pump.
• Provide proper electrical grounding/earthing.
• Protect the motor from excessive moisture and unsuitable environmental conditions.
• Provide adequate clearance around the pump for servicing.
• Avoid operating outside the specified hydraulic range.
Maintenance
Recommended periodic maintenance includes:
• Checking for water leakage
• Inspecting suction and discharge connections
• Checking electrical connections
• Monitoring operating pressure and flow
• Checking for abnormal vibration
• Checking for unusual operating noise
• Inspecting valves and pipework
• Ensuring adequate water supply
• Inspecting the mechanical seal
• Keeping the pump exterior clean
• Checking wear components when necessary
Advantages of EVPM 2-6
High Pressure Capability: The EVPM 2-6 provides up to approximately 69 m head at zero flow, with approximately 65 m at 16.7 L/min and 52 m at 33.3 L/min.
Six-Stage Configuration: Six hydraulic stages provide substantially higher pressure capability than lower-stage models in the same 2 m³/h class.
1.5 HP Motor: The 1.0 kW motor provides a useful balance between pressure performance and electrical power consumption.
220–240V Single Phase: Suitable for installations with a compatible single-phase electrical supply.
Compact Vertical Design: The vertical configuration minimizes floor space while providing multistage pressure.
Flexible Pipe Arrangement: Rotatable inlet and outlet connections provide greater installation flexibility.
Stable Hydraulic Performance: LEO's advanced hydraulic design is intended to provide stable operation and high efficiency.
Corrosion Protection: Cast-iron water connections receive anti-rust treatment, while engineering-plastic components are used in the hydraulic flow passages.
Product Summary
The LEO EVPM 2-6 is a 220–240V, 1.0 kW / 1.5 HP vertical multistage centrifugal pump with a six-stage hydraulic configuration. It provides a published performance range from 0 to 66.7 L/min, with head ranging from approximately 69 m at zero flow to 18 m at 66.7 L/min.
Its compact vertical design, high-pressure capability, rotatable inlet/outlet arrangement and robust hydraulic construction make it suitable for domestic water supply, pressure boosting, high-rise buildings, industrial water systems, cleaning, irrigation and other clean-water applications.
Inquiry - LEO VERTICAL MULTISTAGE PUMPS - EVPM 2-6