The LEO EVPM 4-6 is a vertical multistage centrifugal pump designed for clean-water supply, pressure boosting, high-rise buildings, industrial water systems, cleaning, high-pressure washing and other water-pressure applications. Its six-stage hydraulic configuration provides high head performance while maintaining a compact vertical installation. LEO's technical data identifies the EVPm4-6 as the single-phase version of the EVP4-6.
Product Specifications
| Specification | EVPM 4-6 |
|---|---|
| Brand | LEO |
| Product Series | EVPM / EVP4 |
| Model | EVPM 4-6 |
| Pump Type | Vertical Multistage Centrifugal Pump |
| Voltage | 220V |
| Phase | Single Phase |
| Motor Power | 1.5 kW / 2.0 HP |
| Number of Stages | 6 |
| Nominal Flow Class | 4 m³/h |
| Published Flow Range | 16.7 – 67 L/min |
| Extended Performance Range | Up to 100 L/min |
| Published Head Range | 72 – 36 m |
| Maximum Head | Approx. 74 m at zero flow |
| Inlet | 1" |
| Outlet | 1" |
| Inlet / Outlet | 1" × 1" |
| Pump Orientation | Vertical |
| Liquid Temperature | 5°C – 60°C |
| Maximum Ambient Temperature | 40°C |
| Maximum Working Pressure | 15 bar |
| Maximum Altitude | Up to 1,000 m |
| Motor Protection | IP55 |
| Motor Insulation | Class F |
| Dimensions | Approx. 420 × 315 × 800 mm |
| Weight | Approx. 20.5–21 kg |
The Malaysian EVPM 4-6 listing specifies 220V, 16.7–67 L/min, 72–36 m head, 1.5 kW / 2 HP and 1" × 1" connections. LEO's detailed technical data extends the performance curve to 100 L/min and gives a maximum shut-off head of approximately 74 m.
Hydraulic Performance
LEO's technical performance data for the EVPm4-6 is:
| Flow Rate | Approx. Head |
|---|---|
| 0 L/min | 74 m |
| 16.7 L/min | 72 m |
| 33.3 L/min | 69 m |
| 50 L/min | 66 m |
| 66.7 L/min | 57 m |
| 83.3 L/min | 47 m |
| 100 L/min | 36 m |
These values are based on LEO's published pump performance data. The actual operating point will depend on the system curve, pipe diameter, pipe length, elevation, fittings, valves and required water demand.
For normal catalog presentation, the Malaysian specification can be stated as 16.7–67 L/min with 72–36 m head.
Key Features
• Six-stage vertical multistage centrifugal pump
• 220V single-phase operation
• 1.5 kW / 2.0 HP motor
• 16.7–67 L/min published operating range
• High head capability up to approximately 72 m within the stated operating range
• Maximum shut-off head approximately 74 m
• 1" × 1" inlet and outlet connections
• Compact vertical configuration
• Advanced hydraulic design
• Stable operation and high efficiency
• Rotatable water inlet and outlet
• Cast-iron inlet and outlet with anti-rust treatment
• High-strength engineering-plastic hydraulic components
• Suitable for pressure boosting
• Suitable for domestic, commercial and industrial clean-water systems
Six-Stage Vertical Design
The EVPM 4-6 uses six hydraulic stages arranged vertically. Each stage contributes to the overall pressure generated by the pump, allowing the EVPM 4-6 to achieve substantially higher head than lower-stage models in the same series.
The six-stage arrangement makes this model particularly appropriate for applications requiring high water pressure, including multi-storey buildings, pressure-boosting systems and industrial water installations.
The LEO EVP family is intended for main-pipe and high-rise-building pressure boosting, industrial water systems, cleaning systems, high-pressure washing, firefighting, pressure tanks, sprinkler/drip irrigation, air-conditioning and cooling systems.
Hydraulic Construction
The EVPM series uses high-strength engineering-plastic flow-passage components together with cast-iron water inlet and outlet components treated for anti-rust protection.
The EVP4 series also uses a construction intended to simplify installation and maintenance, with the inlet and outlet arrangement configurable according to installation requirements.
This combination provides a practical balance between hydraulic performance, durability and corrosion resistance for clean-water applications.
Rotatable Inlet and Outlet
The water inlet and outlet can be rotated to accommodate different pipework arrangements. This feature provides greater flexibility when installing the pump in confined pump rooms or connecting it to existing piping.
Connected piping should be independently supported to prevent excessive mechanical loading from being transferred to the pump connections.
Applications
The LEO EVPM 4-6 is suitable for:
• Domestic water supply
• Residential pressure boosting
• Main-pipe pressure boosting
• High-rise building water supply
• Multi-storey buildings
• Water tank boosting
• Commercial buildings
• Hotels and accommodation facilities
• Industrial water systems
• Cleaning systems
• High-pressure washing systems
• Firefighting systems where properly engineered
• Pressure tank systems
• Sprinkler irrigation
• Drip irrigation
• Air-conditioning water systems
• Cooling-water systems
• Industrial cleaning
• General clean-water transfer
LEO specifically lists pressure boosting for main pipes and high-rise buildings, industrial water systems, cleaning, high-pressure washing and firefighting, together with pressure tanks, irrigation, air-conditioning, cooling and industrial cleaning applications.
Pressure Boosting Applications
The EVPM 4-6 is appropriate when the existing water supply does not provide sufficient pressure for the downstream installation.
Typical applications include:
• Increasing water pressure to upper floors
• Boosting water from storage tanks
• Improving pressure in long pipe runs
• Supplying multiple water outlets
• Commercial building water boosting
• High-pressure cleaning equipment
• Irrigation pressure boosting
• Industrial process-water supply
• Pressure tank systems
The six-stage configuration gives the EVPM 4-6 significantly higher pressure capability than the EVPM 4-3, 4-4 and 4-5 models.
Operating Conditions
Published EVP4 technical information specifies:
• Liquid temperature: +5°C to +60°C
• Maximum ambient temperature: +40°C
• Maximum working pressure: 15 bar
• Maximum altitude: up to 1,000 m
The model-specific Malaysian listing confirms the 5°C–60°C liquid-temperature range and altitude up to 1,000 m.
For actual installation, the limits stated on the individual pump nameplate and applicable LEO documentation should take precedence.
Suitable Fluids
The EVPM 4-6 is primarily intended for clean water and compatible low-viscosity liquids.
Suitable applications include:
• Fresh water
• Clean storage-tank water
• Treated water
• General service water
• Clean irrigation water
• Cooling water within the specified temperature range
The pump should not be used for abrasive slurry, heavily contaminated water or liquids containing significant quantities of solids unless compatibility has been specifically confirmed.
Installation Recommendations
For reliable operation:
• Install the pump vertically on a firm and level foundation.
• Use appropriately sized suction and discharge piping.
• Keep the suction line as short and direct as practical.
• Ensure all suction connections are airtight.
• Avoid excessive restrictions on the suction side.
• Support connected pipework independently.
• Install isolation valves where required for maintenance.
• Ensure adequate water supply to the pump.
• Provide proper electrical grounding/earthing.
• Protect the motor from excessive moisture.
• Provide sufficient clearance around the pump for servicing.
• Avoid operating outside the recommended hydraulic range.
• Ensure the electrical supply matches the pump's nameplate requirements.
Maintenance
Recommended periodic maintenance includes:
• Checking for water leakage
• Inspecting suction and discharge connections
• Checking electrical terminals and wiring
• Monitoring operating pressure and flow
• Checking for abnormal vibration
• Checking for unusual operating noise
• Inspecting valves and pipework
• Ensuring adequate water supply
• Checking the mechanical seal for leakage
• Keeping the pump exterior clean
• Inspecting hydraulic and wear components when necessary
Advantages of EVPM 4-6
High Head Performance: The EVPM 4-6 reaches approximately 72 m head at 16.7 L/min, with approximately 69 m at 33.3 L/min and 57 m at 66.7 L/min.
Six-Stage Hydraulic Configuration: Six stages provide higher pressure capability than the lower-stage EVPM 4 models.
2 HP Motor: The 1.5 kW motor provides the power required for higher-pressure water applications.
220V Single Phase: Suitable for installations with an appropriate 220V single-phase supply.
Compact Vertical Design: The vertical arrangement provides high-pressure multistage pumping without requiring a large horizontal footprint.
Flexible Installation: Rotatable inlet and outlet connections allow the pump to be adapted to different pipework configurations.
Anti-Rust Water Connections: Cast-iron water inlet and outlet components receive anti-rust treatment.
Stable Hydraulic Performance: LEO specifies an advanced hydraulic design intended to provide stable operation and high efficiency.
EVPM 4-3 vs EVPM 4-4 vs EVPM 4-5 vs EVPM 4-6
| Specification | EVPM 4-3 | EVPM 4-4 | EVPM 4-5 | EVPM 4-6 |
|---|---|---|---|---|
| Voltage | 220V | 220V | 220V | 220V |
| Motor Power | 0.75 kW / 1 HP | 1.0 kW / 1.5 HP | 1.5 kW / 2 HP | 1.5 kW / 2 HP |
| Stages | 3 | 4 | 5 | 6 |
| Published Flow | 16.7–67 L/min | 16.7–67 L/min | 16.7–67 L/min | 16.7–67 L/min |
| Head Range | 36–16 m | 46–20 m | 58–29 m | 72–36 m |
| Inlet / Outlet | 1" × 1" | 1" × 1" | 1" × 1" | 1" × 1" |
| Pressure Capability | Lower | Medium | High | Highest |
The EVPM 4-6 is the highest-stage configuration in this group, providing the greatest head capability. LEO's technical data confirms the progression through the EVP4 series.
Product Summary
The LEO EVPM 4-6 is a 220V, 1.5 kW / 2.0 HP vertical multistage centrifugal pump featuring a six-stage hydraulic configuration, 16.7–67 L/min published flow range, approximately 72–36 m head, and 1" × 1" inlet/outlet connections. LEO's detailed performance curve shows approximately 74 m maximum head at zero flow, decreasing to approximately 36 m at 100 L/min.
Its high-head performance, compact vertical construction, flexible inlet/outlet arrangement and robust hydraulic design make it suitable for domestic and commercial water pressure boosting, high-rise buildings, industrial water systems, cleaning, high-pressure washing, irrigation and other clean-water applications.
Inquiry - LEO VERTICAL MULTISTAGE PUMPS - EVPM 4-6