B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO CENTRIFUGAL PUMPS - ACM 37



The LEO ACM 37 is a compact single-stage centrifugal water pump designed for clean-water transfer, domestic water supply, pressure boosting, garden and agricultural irrigation, and general industrial applications. It features a 0.37 kW / 0.5 HP motor, 220V single-phase operation, 1" × 1" inlet/outlet connections, and a maximum suction height of 8 m.

Product Specifications

Specification ACM 37
Brand LEO
Model ACM 37
Pump Type Centrifugal Pump
Pump Design Single-Stage
Voltage 220V
Phase Single Phase
Frequency 50 Hz
Motor Power 0.37 kW / 0.5 HP
Flow Range 30 – 90 L/min
Approx. Flow 1.8 – 5.4 m³/h
Head Range 20.5 – 12 m
Maximum Head Approx. 23 m
Maximum Suction Height 8 m
Inlet 1"
Outlet 1"
Inlet / Outlet 1" × 1"
Motor Protection IPX4
Insulation Class F
Maximum Liquid Temperature +40°C
Maximum Ambient Temperature +40°C
Shaft Material AISI 304 Stainless Steel
Pump Body Cast Iron
Pump Body Treatment Anti-Rust Cataphoresis Treatment
Dimensions 290 × 185 × 239 mm
Weight 8.4 kg

The model-specific Malaysian specification lists 30–90 L/min, 20–12 m head, 8 m maximum suction, 0.37 kW / 0.5 HP, 1" × 1" connections, 290 × 185 × 239 mm dimensions and 8.4 kg weight. LEO's technical curve gives a maximum shut-off head of approximately 23 m.

Hydraulic Performance

The ACM 37's published LEO performance curve provides the following approximate values:

Flow Rate Approx. Head
0 L/min 23 m
10 L/min 21.5 m
15 L/min 21 m
20 L/min 21 m
30 L/min 20.5 m
40 L/min 19.5 m
50 L/min 18 m
60 L/min 17 m
70 L/min 15.5 m
75 L/min 14.5 m
80 L/min 14 m
90 L/min 12 m

 

For catalog purposes, the commonly specified operating range is 30–90 L/min at approximately 20–12 m head. Actual pressure and flow will vary according to pipe diameter, pipe length, elevation, fittings, valves and system resistance.

Key Features

• Compact centrifugal pump design
• Single-stage hydraulic configuration
• 220V single-phase motor
• 0.37 kW / 0.5 HP motor
• 30–90 L/min published flow range
• 20–12 m published head range
• Maximum head approximately 23 m
• Maximum suction height of 8 m
• 1" × 1" inlet and outlet
• Copper motor winding
• Built-in thermal protection
• AISI 304 stainless-steel shaft
• Anti-rust treatment on wetted cast-iron components
• Class F insulation
• IPX4 motor protection
• Compact dimensions
• Suitable for continuous general water-transfer applications within rated conditions

Centrifugal Pump Design

The ACM 37 uses a conventional single-stage centrifugal hydraulic design. Water enters through the suction inlet and is accelerated by the rotating impeller before being discharged through the pump outlet.

This design is well suited to applications where a moderate flow rate and moderate pressure are required rather than the higher pressure generated by multistage pumps.

The compact configuration also makes the ACM 37 suitable for installations where available pump-room space is limited.

Pump Body

The pump body is manufactured from cast iron and receives a special anti-rust cataphoresis treatment. This treatment improves protection of the cast-iron pump body and lantern against corrosion in normal service conditions.

The pump's wetted construction is intended primarily for clean water and liquids with physical and chemical properties comparable to water.

Stainless-Steel Shaft

The ACM 37 uses an AISI 304 stainless-steel shaft. This provides improved corrosion resistance in the wetted area compared with a conventional carbon-steel shaft.

Motor Features

The ACM 37 is equipped with a 0.37 kW / 0.5 HP single-phase motor designed for 220V operation.

Important motor features include:

• Copper winding
• Built-in thermal protector
• Class F insulation
• IPX4 protection
• Maximum ambient temperature of +40°C

The integrated thermal protection helps protect the motor against excessive temperature under abnormal operating conditions.

Maximum Suction Height

The maximum published suction height is 8 m.

Actual suction performance depends on atmospheric pressure, water temperature, suction-pipe diameter and length, pipe fittings, water level and installation elevation. For reliable operation, the suction pipe should be correctly sized and free from air leaks.

Applications

The LEO ACM 37 can be used for:

• Domestic water supply
• Clean-water transfer
• Water tank transfer
• Residential water systems
• Pressure boosting
• Garden irrigation
• Agricultural irrigation
• Small-scale irrigation systems
• Industrial water transfer
• General clean-water circulation
• Water supply for commercial premises
• Air-conditioning water circulation where system requirements are suitable

LEO identifies the ACm family for clear-water transfer, industrial use, water supply, fire-system overpressure, garden irrigation, air-conditioning systems, circulation and pressure boosting.

Domestic Water Supply

The ACM 37 can be used as a general-purpose water pump for residential installations where the required flow and pressure fall within the pump curve.

Typical applications include:

• Transferring water from storage tanks
• Supplying garden taps
• Boosting water pressure
• Moving water between tanks
• Small building water systems
• General clean-water transfer

For multi-storey buildings requiring substantially higher pressure, a multistage pump or dedicated booster system may be more appropriate.

Irrigation Applications

The ACM 37 is suitable for small garden and agricultural irrigation systems where the required flow and total dynamic head are within the pump's operating range.

Applications can include:

• Garden sprinklers
• Small irrigation networks
• Water transfer for agricultural use
• Greenhouse water supply
• Tank-to-irrigation transfer

Correct pipe sizing is important because excessive friction losses can significantly reduce the flow available at the irrigation outlets.

Suitable Fluids

The ACM 37 is designed for:

• Clean water
• Fresh water
• Treated water
• General service water
• Other liquids physically and chemically comparable to water

It is not intended for abrasive slurry, heavily contaminated wastewater, liquids containing large quantities of solids or chemically aggressive liquids unless compatibility has been specifically confirmed.

Operating Limits

Published LEO information gives the following general limits:

• Maximum liquid temperature: +40°C
• Maximum ambient temperature: +40°C
• Maximum suction height: 8 m
• Motor insulation: Class F
• Motor protection: IPX4

The actual pump nameplate and installation manual should be used as the final reference for site installation.

Installation Recommendations

For reliable operation:

• Install the pump on a stable and level base.
• Position the pump as close to the water source as practical.
• Use an appropriately sized suction pipe.
• Ensure the suction line is completely airtight.
• Avoid unnecessary bends and restrictions on the suction side.
• Use a suitable foot valve where required for suction applications.
• Support the connected pipework independently.
• Avoid transferring pipe loads to the pump casing.
• Provide suitable isolation valves for servicing.
• Ensure the pump is correctly primed before operation.
• Provide proper electrical grounding/earthing.
• Protect the motor from excessive water exposure.
• Operate within the published flow/head range.

Maintenance

Recommended maintenance checks include:

• Inspecting for water leakage
• Checking mechanical-seal condition
• Checking suction connections for air leakage
• Inspecting discharge connections
• Checking electrical terminals
• Checking motor operation
• Monitoring abnormal vibration
• Monitoring abnormal noise
• Checking flow and pressure
• Inspecting valves and pipework
• Keeping the pump exterior clean
• Ensuring adequate water supply

Advantages of ACM 37

Compact 0.5 HP Pump: The 0.37 kW motor provides a practical solution for smaller water-transfer and pressure-boosting applications.

Good Flow Capability: The published operating range reaches 90 L/min, making the ACM 37 suitable for many domestic, irrigation and general water-transfer duties.

Moderate Pressure: The pump can provide approximately 20.5 m head at 30 L/min, decreasing to approximately 12 m at 90 L/min.

Stainless-Steel Shaft: AISI 304 construction provides improved corrosion resistance in the shaft.

Thermal Protection: The single-phase motor incorporates built-in thermal protection.

Anti-Rust Pump Body: Cataphoresis treatment provides additional corrosion protection to the cast-iron pump body and lantern.

Compact Installation: At approximately 290 × 185 × 239 mm and 8.4 kg, the ACM 37 is relatively compact and easy to integrate into small pump installations.

Product Dimensions & Weight

Dimensions: 290 × 185 × 239 mm
Weight: 8.4 kg

These compact dimensions make the pump suitable for installations where space is restricted.

Product Summary

The LEO ACM 37 is a 220V single-phase, 0.37 kW / 0.5 HP centrifugal water pump designed for clean-water transfer, domestic water supply, pressure boosting, irrigation and general industrial applications. It provides a published flow range of 30–90 L/min, approximately 20–12 m operating head, 8 m maximum suction height, and 1" × 1" inlet/outlet connections.

Its AISI 304 stainless-steel shaft, copper winding, built-in thermal protection, Class F insulation, IPX4 motor protection and anti-rust-treated cast-iron pump body make it a practical general-purpose centrifugal pump for clean-water applications.



 Inquiry - LEO CENTRIFUGAL PUMPS - ACM 37