B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO CENTRIFUGAL PUMPS - ACM 150BF2



The LEO ACM 150BF2 is a high-flow, single-stage centrifugal pump designed for clean-water transfer, domestic and urban water supply, high-rise building pressure boosting, agricultural irrigation and industrial water applications. It is equipped with a 1.5 kW / 2.0 HP motor, 220–240V single-phase supply, 2" × 2" inlet/outlet connections, and a maximum suction height of 8 m. Malaysian supplier specifications list a maximum flow of 500 L/min and head performance of approximately 21–10 m.

Product Specifications

Specification ACM 150BF2
Brand LEO
Model ACM 150BF2
Pump Type Centrifugal Pump
Hydraulic Design Single Stage
Voltage 220–240V
Phase Single Phase
Frequency 50 Hz
Motor Power 1.5 kW / 2.0 HP
Flow Range 75–500 L/min*
Maximum Flow 500 L/min
Approx. Maximum Flow 30 m³/h
Head Range 21–10 m*
Maximum Head Approx. 22 m
Maximum Suction Height 8 m
Inlet 2"
Outlet 2"
Inlet / Outlet 2" × 2"
Shaft Stainless Steel
Motor Winding Copper
Insulation Class F
Motor Protection IPX4
Maximum Liquid Temperature Up to 60°C
Maximum Ambient Temperature Up to 50°C
Pump Orientation Horizontal
Main Application High-flow water transfer

*Published specifications vary slightly between LEO-family and Malaysian supplier listings. One local specification gives 75–500 L/min and 21–10 m, while the closely related AC 150BF2 listing gives 50–500 L/min and 22–10 m. For product listing purposes, the ACM 150BF2-specific specification of 75–500 L/min, 21–10 m is preferable.

Hydraulic Performance

The ACM 150BF2 is designed primarily as a high-flow centrifugal pump. Unlike the standard ACM 150, which prioritizes higher head, the BF2 configuration provides substantially greater flow through its larger 2" × 2" connections.

The published ACM 150BF2 specification gives:

Parameter Performance
Minimum listed flow 75 L/min
Maximum flow 500 L/min
Maximum flow in m³/h 30 m³/h
Head at lower flow Approx. 21 m
Head at maximum flow Approx. 10 m
Maximum suction 8 m

At the maximum rated flow of 500 L/min, the pump can move approximately 30 m³ of water per hour, making it suitable for high-volume transfer and irrigation systems.

Actual operating flow and head depend on the system curve, pipe diameter, pipe length, elevation, fittings, valves and total hydraulic resistance.

Key Features

• High-flow centrifugal pump design
• Single-stage hydraulic construction
• 1.5 kW / 2.0 HP motor
• 220–240V single-phase operation
• Maximum flow up to 500 L/min
• Maximum flow equivalent to approximately 30 m³/h
• Approximate head range of 21–10 m
• 8 m maximum suction height
• Large 2" × 2" inlet and outlet
• Stainless-steel shaft
• Copper motor winding
• Built-in thermal protection
• Class F insulation
• IPX4 motor protection
• Anti-rust treatment for wetted components
• Suitable for high-volume clean-water transfer
• Suitable for irrigation and industrial applications

High-Flow Centrifugal Design

The ACM 150BF2 is intended for applications where moving a relatively large volume of water is more important than achieving very high discharge pressure.

Its 2" suction and discharge connections reduce hydraulic restriction compared with smaller-port centrifugal pumps and allow the pump to handle substantially higher flow rates.

This makes the BF2 configuration particularly suitable for:

• Water transfer
• Irrigation
• Tank filling
• Lake and river water transfer
• Well-water transfer where installation conditions are suitable
• Industrial water circulation
• Large-volume water supply

LEO's ACmB2 family is intended for clear-water transfer, industrial water supply, fire-system overpressure, garden irrigation, air-conditioning circulation and other water-pressure applications.

2" × 2" Large-Bore Connections

The ACM 150BF2 uses 2" inlet and 2" outlet connections. This large-bore configuration is one of the main characteristics distinguishing it from the standard ACM 150.

The larger ports are suitable for high-flow pipework and help reduce excessive velocity and friction losses when the pump is operated at high flow rates.

For best performance, the suction piping should be appropriately sized and kept as short and direct as practical.

Motor

The ACM 150BF2 is powered by a 1.5 kW / 2.0 HP single-phase motor.

Motor features include:

• Copper winding
• Built-in thermal protection
• Class F insulation
• IPX4 protection
• 220–240V operating supply

The integrated thermal protector helps protect the motor from overheating during abnormal operating conditions.

Stainless-Steel Shaft

The pump uses a stainless-steel fabricated shaft, providing improved corrosion resistance and durability in the pump assembly. The LEO ACmB2 family specifies an AISI 304 stainless-steel shaft.

Pump Body & Corrosion Protection

The LEO ACmB2 family uses a cast-iron pump body and lantern with special anti-rust cataphoresis treatment. This treatment provides additional corrosion protection to the pump's exposed/wetted cast-iron components.

This construction is intended for clean-water applications and liquids with physical and chemical properties similar to water.

Maximum Suction Height

The maximum published suction height is 8 m.

Actual suction performance depends on:

• Atmospheric pressure
• Installation elevation
• Water temperature
• Suction-pipe diameter
• Suction-pipe length
• Number of pipe fittings
• Water level relative to pump
• Suction-line air tightness

For suction-lift installations, the suction pipe should be properly sized and completely airtight.

Applications

The LEO ACM 150BF2 is suitable for:

• Clean-water transfer
• Domestic water supply
• Urban water supply
• High-volume water transfer
• Water tank filling
• Water tank transfer
• High-rise building water systems
• Pressure boosting
• Garden irrigation
• Agricultural irrigation
• Large irrigation systems
• Lake water transfer
• River water transfer
• Well-water transfer
• Industrial water supply
• Industrial water circulation
• General clean-water pumping

Local specifications specifically identify clean-water transfer, domestic water supply, high-building pressure boosting, garden and agricultural irrigation and industrial use.

Agricultural Irrigation

The ACM 150BF2 is particularly suited to irrigation systems requiring substantial water volume.

With a maximum published flow of 500 L/min, equivalent to approximately 30 m³/h, it can support larger irrigation networks than smaller 0.5 HP and 1 HP centrifugal pumps, provided the required system head remains within the pump curve.

Typical applications include:

• Agricultural irrigation
• Orchard irrigation
• Garden irrigation
• Sprinkler systems
• Water transfer from ponds or tanks
• Irrigation reservoir filling
• Large-area landscape watering

Correct pipe sizing is important. At high flow rates, undersized pipework can produce significant friction losses and reduce the pressure available at the discharge point.

Industrial Water Transfer

The ACM 150BF2 can be used for general industrial clean-water duties where its flow and head characteristics match the application.

Potential applications include:

• Industrial water transfer
• Process-water circulation
• Cooling-water circulation
• Tank filling
• Equipment water supply
• General factory water distribution
• Water transfer between reservoirs

LEO identifies industrial use and water supply among the applications of its ACmB2 centrifugal-pump family.

Suitable Fluids

The ACM 150BF2 is primarily designed for clean water and liquids with physical and chemical properties similar to water.

Suitable applications include:

• Fresh water
• Clean tank water
• Treated water
• General service water
• Clean irrigation water
• Compatible cooling water

It should not be used for abrasive slurry, heavily contaminated wastewater or chemically aggressive liquids unless material compatibility has been specifically verified.

Operating Limits

Published LEO ACmB2 information gives the following general operating limits:

• Maximum liquid temperature: +40°C for the standard ACmB2 family
• Maximum suction height: 8 m
• Maximum ambient temperature: +40°C for the standard LEO ACmB2 family
• Insulation class: F
• Protection class: IPX4

Some Malaysian ACM 150BF2 listings state a maximum liquid temperature of 60°C and ambient temperature of 50°C.

For a commercial product listing, the actual nameplate and model-specific LEO documentation should take precedence over generic ACmB2 family limits.

Installation Recommendations

For reliable operation:

• Install the pump on a rigid, level foundation.
• Position the pump as close to the water source as practical.
• Use correctly sized 2" suction piping.
• Avoid reducing the suction pipe unnecessarily.
• Keep the suction line short and direct.
• Minimize sharp bends and restrictions.
• Ensure all suction connections are completely airtight.
• Use a suitable foot valve for suction-lift installations where required.
• Support suction and discharge pipework independently.
• Do not allow pipe weight to load the pump casing.
• Install isolation valves for maintenance.
• Prime the pump before starting.
• Ensure adequate water supply.
• Provide proper electrical grounding/earthing.
• Protect the motor from direct water exposure.
• Operate the pump within its rated hydraulic range.

Maintenance

Recommended maintenance includes:

• Inspecting for water leakage
• Checking the mechanical seal
• Checking suction connections for air leakage
• Inspecting discharge connections
• Checking electrical terminals
• Monitoring motor temperature
• Checking for abnormal vibration
• Checking for unusual operating noise
• Monitoring pump flow and pressure
• Inspecting valves
• Checking suction and discharge pipework
• Keeping the pump clean
• Inspecting the impeller and wear components when necessary
 

Advantages of ACM 150BF2

High Flow Capacity: Up to 500 L/min, equivalent to approximately 30 m³/h, makes the pump suitable for high-volume water transfer.

2 HP Motor: The 1.5 kW motor provides the power required for high-flow applications.

Large 2" Connections: The 2" suction and discharge ports are suitable for high-volume pipework.

8 m Suction Height: Suitable for appropriately designed suction-lift installations within the rated conditions.

Stainless-Steel Shaft: AISI 304 shaft construction provides good corrosion resistance.

Thermal Protection: Built-in thermal protection helps protect the single-phase motor from overheating.

Wide Application Range: Suitable for domestic water supply, irrigation, industrial water transfer and general clean-water applications.

Product Summary

The LEO ACM 150BF2 is a 1.5 kW / 2.0 HP, 220–240V single-phase high-flow centrifugal pump with 2" × 2" inlet and outlet connections, an 8 m maximum suction height, and a published maximum flow of 500 L/min (30 m³/h). The model is intended for clean-water transfer, domestic and urban water supply, irrigation, industrial water transfer and other high-volume pumping applications.

Its principal advantage over the standard ACM 150 is its much higher flow capacity, while the ACM 150 provides substantially higher head. Therefore, the ACM 150BF2 is best suited to systems requiring high water volume at relatively moderate pressure



 Inquiry - LEO CENTRIFUGAL PUMPS - ACM 150BF2