The LEO XHSM 1500 is a self-priming centrifugal water pump designed for transferring clean water from lakes, rivers, wells, tanks and other water sources. It is suitable for agricultural irrigation, industrial water transfer and general clean-water applications. The model is equipped with a 1.1 kW / 1.5 HP single-phase motor, 2" × 2" suction and discharge connections, and a maximum suction height of 8 m.
Product Specifications
| Specification | XHSM 1500 |
|---|---|
| Brand | LEO |
| Model | XHSM 1500 |
| Pump Type | Self-Priming Centrifugal Pump |
| Hydraulic Design | Single Stage |
| Motor Power | 1.1 kW / 1.5 HP |
| Motor Type | Single Phase |
| Voltage | 220V |
| Frequency | 50 Hz |
| Maximum Flow | 330 L/min |
| Maximum Flow | 19.8 m³/h |
| Head Range | 15 – 2.5 m |
| Maximum Head | Approx. 15 m |
| Maximum Suction Height | 8 m |
| Suction Connection | 2" |
| Discharge Connection | 2" |
| Inlet / Outlet | 2" × 2" |
| Shaft Material | AISI 304 Stainless Steel |
| Pump Body | Cast Iron |
| Impeller | Cast Iron |
| Mechanical Seal | Carbon / Ceramic |
| Motor Insulation | Class F |
| Motor Protection | IPX4 |
| Maximum Liquid Temperature | +40°C |
| Maximum Ambient Temperature | +40°C |
| Pump Construction | Horizontal |
| Pump Dimensions | 430 × 222 × 308 mm |
| Approx. Pump Weight | 34.5 kg* |
*The 34.5 kg figure is the published packaging weight for the XHSm1500, not necessarily the net pump weight. LEO's official technical data confirms the 430 × 222 × 308 mm dimensions.
Hydraulic Performance
The XHSM 1500 has a broad high-flow performance range:
| Flow Rate | Flow | Approx. Head |
|---|---|---|
| 0 L/min | 0 m³/h | 15 m |
| 35 L/min | 2.1 m³/h | 14 m |
| 75 L/min | 4.5 m³/h | 12.5 m |
| 110 L/min | 6.6 m³/h | 11 m |
| 135 L/min | 8.1 m³/h | 10 m |
| 170 L/min | 10.2 m³/h | 8.5 m |
| 200 L/min | 12.0 m³/h | 7 m |
| 235 L/min | 14.1 m³/h | 5 m |
| 270 L/min | 16.2 m³/h | 2.5 m |
| 330 L/min | 19.8 m³/h | — |
LEO's official technical table specifies the XHSm1500 at 1.1 kW, with flow points from 0 to 330 L/min and corresponding head performance from 15 m down to approximately 2.5 m.
For practical catalog presentation, it is appropriate to state the pump's maximum flow as 330 L/min / 19.8 m³/h and maximum head as approximately 15 m.
Key Features
• Self-priming centrifugal pump design
• 1.1 kW / 1.5 HP motor
• 220V single-phase operation
• High flow capacity up to 330 L/min
• Maximum flow equivalent to approximately 19.8 m³/h
• Maximum head approximately 15 m
• Maximum suction height of 8 m
• Large 2" × 2" inlet and outlet connections
• Cast-iron pump body
• Cast-iron impeller
• AISI 304 stainless-steel shaft
• Carbon/ceramic mechanical seal
• Anti-rust cataphoresis treatment
• Built-in thermal protection for single-phase motor
• Class F insulation
• IPX4 motor protection
• Suitable for lake, river and well-water pumping
• Suitable for agricultural irrigation
• Suitable for industrial water transfer
Self-Priming Centrifugal Design
The XHSM 1500 differs from a conventional centrifugal pump because it incorporates a self-priming configuration.
This design allows the pump to evacuate air from the suction line after the pump has been properly initially filled, making it suitable for installations where the pump is positioned above the water source.
The integrated non-return valve helps retain water within the pump system and supports the self-priming function. LEO's parts breakdown identifies the non-return valve as NBR (nitrile rubber).
Initial priming is still required according to the manufacturer's installation procedure. A self-priming pump should not be interpreted as a pump that can operate completely dry.
High-Flow Performance
The XHSM 1500 is designed primarily for high-volume water transfer at relatively moderate pressure.
At the upper end of its published performance curve, the pump can reach approximately 330 L/min, equivalent to 19.8 m³/h. This makes it particularly suitable for irrigation, tank transfer and other applications where large quantities of water need to be moved.
The pump's head decreases as flow increases. Therefore, the maximum flow of 330 L/min should not be interpreted as being available at the maximum 15 m head.
Pump selection should always be based on the required operating point rather than maximum flow alone.
2" × 2" Connections
The XHSM 1500 uses 2" suction and 2" discharge connections.
The large-bore configuration is appropriate for the pump's high-flow characteristics and helps reduce excessive velocity and friction losses in properly sized pipework.
For best results:
• Use a correctly sized 2" suction line.
• Keep the suction line short.
• Minimize sharp bends.
• Avoid unnecessary restrictions.
• Ensure suction connections are completely airtight.
• Support pipework independently from the pump.
Pump Body
The XHSM 1500 uses a cast-iron pump body with special anti-rust cataphoresis treatment. LEO specifies the same anti-rust treatment for the pump support/lantern.
This provides additional corrosion protection for the cast-iron components during normal clean-water service.
Impeller
The XHSM 1500 uses a cast-iron impeller. The impeller is the primary rotating hydraulic component responsible for transferring energy from the motor to the water.
The impeller construction is intended for clean-water applications and liquids with physical and chemical properties comparable to water.
AISI 304 Stainless-Steel Shaft
The pump incorporates an AISI 304 stainless-steel shaft. This provides good corrosion resistance and durability for the rotating shaft assembly.
Mechanical Seal
The XHSM 1500 uses a carbon/ceramic mechanical seal. The mechanical seal helps prevent pumped water from escaping along the rotating shaft into the motor area.
Proper operation within the specified temperature and hydraulic conditions is important for mechanical-seal service life.
Motor
The XHSM 1500 is equipped with a 1.1 kW / 1.5 HP single-phase motor.
Motor features include:
• Single-phase electrical supply
• Integrated thermal protection
• Class F insulation
• IPX4 protection
• Maximum ambient temperature of +40°C
The integrated thermal protection helps protect the motor against overheating under abnormal operating conditions.
Maximum Suction Height
The published maximum suction height is 8 m.
Actual achievable suction height depends on:
• Atmospheric pressure
• Installation altitude
• Water temperature
• Suction-pipe diameter
• Suction-pipe length
• Pipe fittings
• Water level
• Air tightness of the suction line
• Hydraulic losses
For reliable suction operation, the suction pipe should be correctly sized and completely free of air leaks.
Applications
The LEO XHSM 1500 is suitable for:
• Agricultural irrigation
• Garden irrigation
• Farm water transfer
• Water transfer from lakes
• Water transfer from rivers
• Well-water pumping
• Tank-to-tank water transfer
• Reservoir filling
• Clean-water transfer
• Industrial water supply
• Industrial water transfer
• General clean-water pumping
LEO specifically identifies the XHSm series for clear-water transfer, lake, river and well pumping, industrial use and agricultural irrigation.
Agricultural Irrigation
The XHSM 1500 is particularly suitable for irrigation systems requiring relatively high water volume.
With a maximum published flow of 330 L/min, it can provide approximately 19.8 m³/h under the relevant hydraulic conditions.
Suitable applications include:
• Orchard irrigation
• Farm irrigation
• Garden irrigation
• Sprinkler systems
• Water transfer from ponds
• Water transfer from reservoirs
• Irrigation tank filling
• Landscape irrigation
Correct pipe sizing is important because friction losses increase as flow increases.
Lake, River & Well Water Transfer
The self-priming configuration makes the XHSM 1500 suitable for installations where the pump must draw water from an external source such as a lake, river or well.
LEO specifically lists lake, river and well-water pumping among the intended applications.
A suitable suction strainer or foot valve should be used where required to prevent debris from entering the pump and to maintain the suction system.
Industrial Applications
The XHSM 1500 can also be used for general industrial clean-water duties, including:
• Factory water transfer
• Process-water transfer
• Tank filling
• Reservoir transfer
• Equipment water supply
• Cooling-water circulation where compatible
• General industrial water distribution
LEO identifies industrial use as an application for the XHSm series.
Suitable Fluids
The XHSM 1500 is designed for clean water and liquids with physical and chemical characteristics comparable to water.
Suitable fluids include:
• Fresh water
• Clean tank water
• Clean well water
• Clean river water
• Clean lake water
• Treated water
• General service water
It should not be used for abrasive slurry, heavily contaminated wastewater or chemically aggressive liquids unless compatibility has been specifically confirmed.
Operating Conditions
LEO's official XHSm specifications state:
• Maximum liquid temperature: +40°C
• Maximum suction height: 8 m
• Maximum ambient temperature: +40°C
• Insulation class: F
• Motor protection: IPX4
These limits should be observed during installation and operation.
Installation Recommendations
For reliable operation:
• Install the pump on a rigid, level foundation.
• Position the pump as close to the water source as practical.
• Use appropriately sized 2" suction piping.
• Keep the suction pipe short and direct.
• Minimize elbows and sharp bends.
• Ensure all suction joints are airtight.
• Install a suitable foot valve/strainer where required.
• Support suction and discharge pipework independently.
• Do not allow pipe weight to load the pump casing.
• Fill/prime the pump before initial operation.
• Ensure adequate water is available at the suction source.
• Provide proper electrical grounding/earthing.
• Protect the motor from direct water exposure.
• Do not operate the pump dry.
• Operate within the published hydraulic range.
Maintenance
Recommended maintenance checks include:
• Inspecting for water leakage
• Checking the mechanical seal
• Checking suction connections for air leakage
• Inspecting the non-return valve
• Cleaning the suction strainer
• Checking the impeller condition
• Checking electrical terminals
• Monitoring motor temperature
• Checking for abnormal vibration
• Checking for unusual noise
• Monitoring flow and pressure
• Inspecting suction and discharge pipework
• Keeping the pump exterior clean
XHSM 1500 vs XHSM 2000
The XHSM 1500 and XHSM 2000 use the same basic self-priming centrifugal platform but have different motor power and hydraulic performance.
| Specification | XHSM 1500 | XHSM 2000 |
|---|---|---|
| Motor Power | 1.1 kW / 1.5 HP | 1.5 kW / 2.0 HP |
| Pump Type | Self-Priming Centrifugal | Self-Priming Centrifugal |
| Connection | 2" × 2" | 2" × 2" |
| Maximum Flow | 330 L/min | Approx. 330 L/min |
| Maximum Head | 15 m | 20.5 m |
| Maximum Suction | 8 m | 8 m |
| Shaft | AISI 304 SS | AISI 304 SS |
| Main Difference | Lower power/head | Higher power/head |
LEO's official technical data lists the XHSm1500 at 1.1 kW / 15 m maximum head, while the XHSm2000 is rated at 1.5 kW / 20.5 m maximum head.
Product Dimensions
The official LEO dimensional data gives:
Length: 430 mm
Width: 222 mm
Height: 308 mm
Suction connection: 2"
Discharge connection: 2"
The published packaging information gives a packaged weight of approximately 34.5 kg with packaging dimensions of 475 × 280 × 380 mm.
Product Summary
The LEO XHSM 1500 is a 1.1 kW / 1.5 HP single-phase self-priming centrifugal pump designed for high-volume clean-water transfer. It features 2" × 2" connections, an 8 m maximum suction height, approximately 15 m maximum head, and a maximum published flow of 330 L/min / 19.8 m³/h.
Its self-priming design, cast-iron pump body and impeller, AISI 304 stainless-steel shaft, carbon/ceramic mechanical seal, thermal motor protection and large 2" connections make it well suited to agricultural irrigation, lake/river/well water transfer, industrial water transfer and general clean-water applications.
Inquiry - LEO CENTRIFUGAL PUMPS - XHSM 1500