B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO CENTRIFUGAL PUMPS - XHS 5500



The LEO XHS 5500 is a heavy-duty self-priming centrifugal pump with a semi-open impeller, designed for high-volume water transfer and applications involving water containing small solids or fibrous material. It is particularly suitable for wastewater treatment, sewage transfer, agricultural irrigation, industrial water transfer and general high-flow pumping. Available Malaysian specifications list a 4.0 kW / approximately 5.5 HP, 415V three-phase motor, 3" × 3" connections, flow up to approximately 1,328 L/min, and head performance of approximately 25–6 m.

Product Specifications

Specification XHS 5500
Brand LEO
Model XHS 5500
Pump Type Self-Priming Centrifugal Pump
Impeller Type Semi-Open Impeller
Motor Power 4.0 kW / Approx. 5.5 HP
Voltage 415V
Phase Three Phase
Frequency 50 Hz
Maximum Flow Approx. 1,328 L/min
Maximum Flow Approx. 79.7 m³/h
Flow Range Approx. 83–1,328 L/min
Head Range Approx. 25–6 m
Maximum Head Approx. 25–26 m
Suction Connection 3"
Discharge Connection 3"
Inlet / Outlet 3" × 3"
Pump Type Horizontal Surface Pump
Impeller Semi-Open
Application Clean water / wastewater with small solids
Motor Three-Phase Induction Motor
Main Duty High-Volume Water Transfer

The Malaysian XHS5500 specification specifically lists 4.0 kW, 415V, 83–1,328 L/min, 25–6 m head and 3" × 3" connections.

Hydraulic Performance

The XHS 5500 is designed for very high flow at moderate head, making it different from high-pressure centrifugal pumps.

Parameter Approx. Performance
Minimum published flow 83 L/min
Maximum published flow 1,328 L/min
Maximum flow Approx. 79.7 m³/h
Maximum head Approx. 25 m
Head at high-flow end Approx. 6 m
Suction / discharge 3" × 3"

The hydraulic curve should be used to determine the actual operating point. The stated 1,328 L/min maximum flow is not achieved simultaneously with the maximum 25 m head. As system head increases, available flow decreases.

Key Features

• Self-priming centrifugal design
• Semi-open impeller
• 4.0 kW motor
• Approximately 5.5 HP motor rating
• 415V three-phase electrical supply
• High flow capacity up to approximately 1,328 L/min
• Approximately 79.7 m³/h maximum flow
• Maximum head approximately 25 m
• Large 3" suction and discharge ports
• Suitable for water containing small solids or fibrous material
• Suitable for wastewater applications
• Suitable for sewage transfer
• Suitable for agricultural irrigation
• Suitable for industrial water transfer
• Designed for high-volume pumping applications

Semi-Open Impeller

One of the main characteristics of the XHS 5500 is its semi-open impeller.

Compared with a fully enclosed impeller used in many conventional clean-water centrifugal pumps, a semi-open impeller provides greater tolerance for water containing small suspended solids and fibrous material.

This makes the XHS 5500 more appropriate for applications such as:

• Wastewater transfer
• Sewage pumping
• Drainage
• Agricultural water transfer
• Industrial wastewater
• Water containing small debris
• General dirty-water transfer

The Malaysian product specification specifically describes the XHS5500 as a self-priming centrifugal pump with a semi-open impeller and identifies wastewater treatment and liquids containing small solids or fibrous material as applications.

Self-Priming Pump Design

The XHS 5500 uses a self-priming configuration, allowing it to be installed above the water source in suitable suction-lift applications.

The self-priming arrangement is particularly useful where:

• The pump cannot be installed below the water level
• Water must be drawn from a tank or reservoir
• The pump is positioned beside a drainage pit
• Water is transferred from an open source
• Frequent manual priming would be inconvenient

The pump should nevertheless be correctly filled and commissioned according to the manufacturer's installation procedure. Self-priming does not mean that the pump can safely operate dry.

High-Flow Capacity

The XHS 5500 is intended for applications requiring large quantities of water to be moved quickly.

At its maximum published flow of approximately 1,328 L/min, the pump can move approximately:

1,328 L/min × 60 = 79,680 L/hour

or approximately:

79.7 m³/hour

This makes the XHS 5500 suitable for large irrigation systems, industrial water transfer, wastewater transfer and other high-volume applications.

3" × 3" Connections

The XHS 5500 uses 3-inch suction and 3-inch discharge connections.

The large connection size is appropriate for the pump's high-flow hydraulic characteristics.

For optimum performance:

• Use correctly sized 3" suction piping.
• Avoid unnecessarily reducing the suction pipe diameter.
• Keep the suction line as short as practical.
• Minimize sharp bends.
• Avoid unnecessary restrictions.
• Ensure all suction joints are airtight.
• Support pipework independently from the pump.

An undersized suction line can increase friction losses and reduce the pump's achievable flow.

Wastewater Applications

The XHS 5500 is particularly useful where the pumped water is not perfectly clean.

Potential applications include:

• Wastewater treatment plants
• Sewage transfer
• Drainage systems
• Industrial wastewater transfer
• Construction-site water transfer
• Agricultural drainage
• Dirty-water transfer
• Sump pumping
• Water containing small fibrous materials

The semi-open impeller provides greater passage capability than a conventional closed clean-water impeller. However, it should not be considered a solids-handling sewage grinder pump. Large solids, stones, heavy abrasive material or long fibrous material can still cause blockage or damage.

Agricultural Irrigation

The XHS 5500's high flow capacity makes it suitable for large agricultural irrigation installations.

Applications include:

• Farm irrigation
• Orchard irrigation
• Large sprinkler systems
• Agricultural water transfer
• Reservoir transfer
• Pond-to-field water transfer
• Irrigation tank filling
• Drainage and water management

At approximately 79.7 m³/h maximum flow, the pump can move considerably larger volumes of water than smaller domestic centrifugal pumps.

Industrial Applications

The XHS 5500 can be used for a variety of industrial water-transfer applications, including:

• Industrial water transfer
• Process-water transfer
• Wastewater transfer
• Cooling-water circulation
• Tank filling
• Reservoir transfer
• Factory drainage
• General utility water pumping

For chemically aggressive liquids, the pump's wetted-material compatibility must be verified before use.

Suitable Fluids

The XHS 5500 is primarily intended for water and water-based liquids within the pump's material and temperature limits.

Typical applications include:

• Clean water
• Irrigation water
• Surface water
• Drainage water
• Wastewater
• Sewage containing small solids
• Industrial water
• Water containing small fibrous material

The model is specifically marketed for wastewater treatment and pumping liquids containing small solids or fibrous material.

For abrasive slurry, highly corrosive chemicals or liquids containing large solids, suitability should be confirmed before installation.

Motor

The XHS 5500 is specified with a 4.0 kW motor and 415V three-phase power supply in Malaysian product information.

The three-phase configuration is appropriate for commercial, agricultural and industrial installations where three-phase electrical power is available.

Advantages of the three-phase motor configuration include:

• Suitable for industrial electrical systems
• Efficient operation for higher-power applications
• Suitable for continuous-duty pumping applications when correctly installed
• Reduced electrical current per phase compared with equivalent single-phase configurations
• Suitable for larger pumping installations

Appropriate motor protection, overload protection, earthing and phase protection should be provided during installation.

Installation Recommendations

For reliable operation:

• Install the pump on a rigid, level foundation.
• Position it as close to the water source as practical.
• Use correctly sized suction pipework.
• Keep the suction line short and direct.
• Ensure suction connections are completely airtight.
• Install a suitable strainer where required.
• Prevent excessively large debris from entering the pump.
• Support suction and discharge pipework independently.
• Do not allow pipe weight to load the pump casing.
• Prime the pump according to the manufacturer's instructions before operation.
• Check the motor rotation direction before continuous operation.
• Install suitable overload and short-circuit protection.
• Provide proper electrical earthing.
• Do not operate the pump dry.
• Avoid operation outside the hydraulic performance curve.

Maintenance

Regular maintenance should include:

• Checking for water leakage
• Inspecting the mechanical seal
• Checking suction-line air leakage
• Cleaning the suction strainer
• Inspecting the semi-open impeller
• Removing accumulated debris
• Checking for abnormal vibration
• Checking for unusual operating noise
• Monitoring motor temperature
• Checking electrical terminals
• Checking phase balance
• Inspecting bearings where applicable
• Monitoring discharge pressure and flow
• Inspecting suction and discharge pipework

For wastewater applications, periodic inspection of the impeller is particularly important because fibrous material and debris can accumulate around the hydraulic components.

Advantages of XHS 5500

High Flow: Up to approximately 1,328 L/min / 79.7 m³/h, making the pump suitable for large-volume water transfer.

Semi-Open Impeller: Provides better tolerance for water containing small solids or fibrous material than conventional closed-impeller clean-water pumps.

Self-Priming: Suitable for installations where the pump needs to draw water from a source below pump level.

3" Connections: Large suction and discharge connections support high-volume pumping.

4.0 kW Motor: Provides the power required for high-flow industrial and agricultural applications.

Three-Phase Operation: Suitable for industrial and commercial electrical installations.

Wide Application Range: Can be used for irrigation, wastewater treatment, sewage transfer and industrial water transfer.

XHS 5500 vs XHSM 1500

The XHS 5500 is substantially larger and is intended for much higher flow applications than the XHSM 1500.

Specification XHSM 1500 XHS 5500
Pump Type Self-Priming Centrifugal Self-Priming Centrifugal
Impeller Conventional Semi-Open
Motor Power 1.1 kW / 1.5 HP 4.0 kW / Approx. 5.5 HP
Supply 220V Single Phase 415V Three Phase
Connection 2" × 2" 3" × 3"
Maximum Flow 330 L/min 1,328 L/min
Maximum Flow 19.8 m³/h 79.7 m³/h
Maximum Head 15 m Approx. 25 m
Main Application Clean-water transfer High-flow / wastewater transfer
Solids Tolerance Limited Small solids / fibrous material

The XHSM 1500 is primarily a clean-water pump, while the XHS 5500's semi-open impeller makes it more suitable for applications where the water may contain small solids or fibrous material.

Product Summary

The LEO XHS 5500 is a 4.0 kW / approximately 5.5 HP, 415V three-phase self-priming centrifugal pump with a semi-open impeller. It features 3" × 3" suction and discharge connections, a maximum published flow of approximately 1,328 L/min (79.7 m³/h) and approximately 25–6 m head performance.

Its combination of high flow, self-priming capability and semi-open impeller construction makes it particularly suitable for wastewater treatment, sewage transfer, agricultural irrigation, drainage and industrial water transfer where small solids or fibrous material may be present.



 Inquiry - LEO CENTRIFUGAL PUMPS - XHS 5500