The LEO XHS 10000 is a heavy-duty self-priming centrifugal pump with a semi-open impeller, designed for high-volume water transfer, wastewater, sewage, agricultural irrigation and industrial pumping applications. The Malaysian specifications list a 7.5 kW / 10 HP, 415V three-phase motor, 3" × 3" suction/discharge connections, flow from approximately 83 to 1,660 L/min, head from approximately 33 to 10 m, and a maximum suction height of 5 m.
Product Specifications
| Specification | XHS 10000 |
|---|---|
| Brand | LEO |
| Model | XHS 10000 |
| Pump Type | Self-Priming Centrifugal Pump |
| Impeller Type | Semi-Open Impeller |
| Motor Power | 7.5 kW / 10 HP |
| Voltage | 415V |
| Phase | Three Phase |
| Frequency | 50 Hz |
| Flow Range | 83–1,660 L/min |
| Maximum Flow | 1,660 L/min |
| Maximum Flow | Approx. 99.6 m³/h |
| Head Range | 33–10 m |
| Maximum Head | Approx. 33 m |
| Maximum Suction Height | 5 m |
| Inlet | 3" |
| Outlet | 3" |
| Inlet / Outlet | 3" × 3" |
| Pump Construction | Horizontal |
| Impeller | Semi-Open |
| Main Application | High-volume water / wastewater transfer |
| Motor | Three-Phase Motor |
The XHS 10000 is specified locally at 83–1,660 L/min, 33–10 m head, 7.5 kW / 10 HP, 415V, and 3" × 3" connections.
Hydraulic Performance
The XHS 10000 is intended for high-flow, moderate-head pumping rather than high-pressure applications.
| Parameter | Performance |
|---|---|
| Minimum listed flow | 83 L/min |
| Maximum listed flow | 1,660 L/min |
| Maximum flow | Approx. 99.6 m³/h |
| Maximum head | Approx. 33 m |
| Head at high-flow end | Approx. 10 m |
| Suction / discharge | 3" × 3" |
The hydraulic values represent the operating range rather than a single operating point. The pump cannot deliver its maximum 1,660 L/min and maximum 33 m head simultaneously. Actual flow is determined by the system's total dynamic head and resistance.
High-Flow Capacity
At the published maximum flow of 1,660 L/min, the XHS 10000 can theoretically transfer approximately:
1,660 L/min × 60 = 99,600 L/hour
or approximately:
99.6 m³/hour
This makes the XHS 10000 suitable for large-volume water movement in agricultural, commercial and industrial installations.
Typical high-flow applications include:
• Large agricultural irrigation systems
• Reservoir transfer
• Pond and lake water transfer
• Industrial water transfer
• Wastewater transfer
• Drainage systems
• Sewage transfer
• Tank filling
• Industrial process-water transfer
Semi-Open Impeller
The XHS 10000 uses a semi-open impeller, making it more suitable than a conventional closed-impeller clean-water pump for liquids containing small suspended solids or fibrous material.
This configuration is particularly useful in:
• Wastewater treatment
• Sewage transfer
• Agricultural drainage
• Industrial wastewater
• Dirty-water transfer
• Water containing small debris
• Fibrous-material applications
LEO's XHS/XHSm family is designed for applications including wastewater treatment and pumping liquids containing small solids or fibrous material.
It should not, however, be treated as a grinder pump or unrestricted solids-handling sewage pump. Large stones, heavy solids and excessive fibrous material can still cause blockage or impeller damage.
Self-Priming Design
The self-priming configuration allows the XHS 10000 to operate in suitable installations where the pump is positioned above the water source.
This is useful for:
• Open tanks
• Reservoirs
• Drainage pits
• Irrigation ponds
• Lakes and rivers
• Water-transfer systems
The pump still needs to be properly commissioned and primed according to the manufacturer's procedure. Self-priming does not mean the pump is designed for prolonged dry running.
3" × 3" Connections
The XHS 10000 has 3-inch suction and 3-inch discharge connections.
The 3" ports are appropriate for the pump's high-flow capacity and help maintain suitable hydraulic conditions when connected to correctly sized pipework.
For best performance:
• Use appropriately sized suction piping.
• Keep the suction line as short as practical.
• Minimize elbows and sharp bends.
• Avoid unnecessary reducers on the suction side.
• Ensure all suction connections are airtight.
• Use an appropriate suction strainer where required.
• Support the pipework independently from the pump.
7.5 kW / 10 HP Motor
The XHS 10000 is equipped with a 7.5 kW / 10 HP motor and operates from a 415V three-phase supply.
The higher motor rating provides the power required to maintain high flow and moderate head in larger pumping systems.
For installation, suitable electrical protection should be provided, including:
• Motor overload protection
• Short-circuit protection
• Correct earthing
• Phase protection where appropriate
• Correctly sized cabling
• Proper motor starter/control equipment
Applications
The LEO XHS 10000 is suitable for:
• Agricultural irrigation
• Commercial irrigation
• Large sprinkler systems
• Farm water transfer
• Reservoir pumping
• Pond water transfer
• Lake water transfer
• Industrial water transfer
• Wastewater transfer
• Sewage transfer
• Drainage
• Industrial wastewater
• Tank filling
• Process-water transfer
• General high-volume pumping
LEO identifies the broader self-priming centrifugal range for water transfer, industrial use and agricultural irrigation.
Agricultural Irrigation
The XHS 10000 is particularly suitable for larger agricultural installations requiring substantial water volume.
With a maximum published flow of approximately 1,660 L/min / 99.6 m³/h, it can support large irrigation networks when the required head is within the pump's hydraulic curve.
Typical applications include:
• Orchard irrigation
• Plantation irrigation
• Large farm irrigation
• Sprinkler irrigation
• Reservoir-to-field transfer
• Irrigation tank filling
• Agricultural drainage
Correct pipe sizing is critical. Undersized pipework can create significant friction losses and substantially reduce the pressure and flow available at the discharge point.
Wastewater & Sewage Applications
The semi-open impeller makes the XHS 10000 suitable for wastewater applications where the liquid may contain small solids or fibrous material.
Potential uses include:
• Wastewater treatment plants
• Sewage transfer
• Drainage pits
• Industrial wastewater
• Agricultural wastewater
• Dirty-water transfer
• Sump transfer
• Wastewater collection systems
The pump should be protected against oversized solids entering the suction line. A suitable screen or strainer may be necessary depending on the application.
Industrial Applications
The XHS 10000 can be used for high-volume industrial water duties such as:
• Factory water transfer
• Process-water transfer
• Industrial drainage
• Wastewater transfer
• Cooling-water circulation
• Reservoir transfer
• Tank filling
• Utility-water distribution
For chemically aggressive liquids, the compatibility of the pump's wetted materials with the liquid must be confirmed before use.
Suitable Fluids
The pump is suitable for water and water-based liquids within its specified operating conditions.
Applications may include:
• Clean water
• Irrigation water
• Surface water
• Drainage water
• Wastewater
• Sewage containing small solids
• Industrial water
• Water containing small fibrous material
For abrasive slurry, highly corrosive chemicals or liquids containing large solids, suitability should be confirmed before installation.
Maximum Suction Height
The XHS 10000 is listed with a maximum suction height of 5 m.
This is an important distinction from some smaller LEO self-priming models.
Actual suction performance depends on:
• Atmospheric pressure
• Installation altitude
• Water temperature
• Suction pipe diameter
• Suction pipe length
• Pipe fittings
• Water level
• Suction-line air tightness
• Hydraulic losses
The suction line should be designed carefully, particularly when operating near the maximum suction height.
Installation Recommendations
For reliable operation:
• Install the pump on a rigid and level foundation.
• Place it as close to the water source as practical.
• Use correctly sized 3" suction piping.
• Keep the suction line short and direct.
• Avoid excessive elbows and restrictions.
• Ensure all suction joints are completely airtight.
• Use a suitable strainer where necessary.
• Prevent oversized solids from entering the pump.
• Support suction and discharge piping independently.
• Do not place excessive pipe loads on the pump casing.
• Prime the pump before operation according to the manufacturer's instructions.
• Confirm correct motor rotation.
• Install appropriate motor protection.
• Provide proper electrical earthing.
• Do not operate the pump dry.
• Operate within the specified hydraulic curve.
Maintenance
Regular maintenance should include:
• Checking for water leakage
• Inspecting the mechanical seal
• Checking suction-line air leakage
• Cleaning the suction strainer
• Inspecting the semi-open impeller
• Removing accumulated debris
• Checking for abnormal vibration
• Checking for unusual operating noise
• Monitoring motor temperature
• Checking electrical terminals
• Checking phase balance
• Inspecting bearings as required
• Monitoring discharge pressure and flow
• Inspecting suction and discharge pipework
For wastewater applications, regular inspection of the impeller is particularly important.
XHS 10000 vs XHS 5500
The XHS 10000 is the higher-capacity model compared with the XHS 5500.
| Specification | XHS 5500 | XHS 10000 |
|---|---|---|
| Motor Power | 4.0 kW / 5.5 HP | 7.5 kW / 10 HP |
| Voltage | 415V | 415V |
| Phase | Three Phase | Three Phase |
| Impeller | Semi-Open | Semi-Open |
| Flow Range | 83–1,328 L/min | 83–1,660 L/min |
| Maximum Flow | 79.7 m³/h | 99.6 m³/h |
| Head Range | 25–6 m | 33–10 m |
| Maximum Suction | — | 5 m |
| Inlet / Outlet | 3" × 3" | 3" × 3" |
| Main Advantage | High flow | Higher flow & head |
The XHS 10000 provides both a higher motor rating and higher hydraulic performance than the XHS 5500, making it suitable where the system requires greater flow and/or head.
XHS 10000 vs XHSM 1500
| Specification | XHSM 1500 | XHS 10000 |
|---|---|---|
| Pump Type | Self-Priming Centrifugal | Self-Priming Centrifugal |
| Impeller | Standard | Semi-Open |
| Motor | 1.1 kW / 1.5 HP | 7.5 kW / 10 HP |
| Supply | Single Phase | 415V Three Phase |
| Maximum Flow | 330 L/min | 1,660 L/min |
| Maximum Flow | 19.8 m³/h | 99.6 m³/h |
| Maximum Head | 15 m | 33 m |
| Connections | 2" × 2" | 3" × 3" |
| Maximum Suction | 8 m | 5 m |
| Main Duty | Clean-water transfer | High-flow water / wastewater |
The XHSM 1500 is a smaller clean-water self-priming pump, while the XHS 10000 is a much larger high-flow pump with a semi-open impeller intended for more demanding applications.
Key Advantages
10 HP High-Power Motor: The 7.5 kW motor provides the power required for high-volume pumping.
Very High Flow: Maximum published flow of approximately 1,660 L/min / 99.6 m³/h.
Higher Head: Maximum published head of approximately 33 m, giving it greater pressure capability than the XHS 5500.
Semi-Open Impeller: Better suited to water containing small solids or fibrous material than standard closed-impeller clean-water pumps.
Self-Priming: Suitable for appropriate suction-lift installations.
3" Connections: Large-bore connections support high-volume water transfer.
415V Three Phase: Suitable for commercial, agricultural and industrial electrical systems.
Product Summary
The LEO XHS 10000 is a 7.5 kW / 10 HP, 415V three-phase self-priming centrifugal pump with a semi-open impeller. It features 3" × 3" inlet and outlet connections, a published flow range of approximately 83–1,660 L/min (up to 99.6 m³/h), head performance of approximately 33–10 m, and a 5 m maximum suction height.
Its combination of high pumping capacity, self-priming construction and semi-open impeller makes it suitable for large agricultural irrigation systems, wastewater treatment, sewage transfer, drainage, industrial water transfer and other high-volume pumping applications.
Inquiry - LEO CENTRIFUGAL PUMPS - XHS 10000