The LEO 3ACm45 is a compact three-stage horizontal multistage centrifugal pump designed for clean-water transfer, domestic water supply, pressure boosting, garden irrigation, agricultural applications and light industrial water circulation. It is equipped with a 0.45 kW / 0.6 HP single-phase 220–240V motor, three thermoplastic impeller stages, an AISI 304 stainless-steel shaft, and 1" × 1" suction/discharge connections.
Product Specifications
| Specification | 3ACm45 |
|---|---|
| Brand | LEO |
| Model | 3ACm45 / 3ACM45 |
| Pump Type | Horizontal Multistage Centrifugal Pump |
| Number of Stages | 3 |
| Motor Power | 0.45 kW |
| Motor Rating | 0.6 HP |
| Motor Phase | Single Phase |
| Voltage | 220–240V |
| Frequency | 50 Hz |
| Maximum Flow | Approx. 70 L/min |
| Maximum Flow | Approx. 4.2 m³/h |
| Maximum Head | Approx. 38 m |
| Practical Published Curve | Approx. 35 m at 0 flow to 9 m at 70 L/min |
| Maximum Suction Height | 8 m |
| Suction Connection | 1" |
| Discharge Connection | 1" |
| Inlet / Outlet | 1" × 1" |
| Impeller | Thermoplastic / Noryl-type |
| Pump Body | Cast Iron |
| Pump Support | Cast Iron |
| Shaft | AISI 304 Stainless Steel |
| Mechanical Seal | Carbon / Ceramic |
| O-Ring | NBR |
| Motor Winding | Copper |
| Insulation Class | F |
| Protection Class | IPX4 |
| Motor Protection | Built-in Thermal Protection |
| Maximum Liquid Temperature | +40°C* |
| Maximum Ambient Temperature | +40°C* |
| Construction | Horizontal |
| Approx. Packaged Weight | 13.2 kg |
| Approx. Dimensions | 356 × 180 × 182 mm |
*Published specifications vary by LEO market/catalogue generation; some regional listings state a higher liquid-temperature limit. For a Malaysia product listing, the current LEO Europe specification should be treated as the conservative reference unless the supplied unit's nameplate/manual states otherwise. LEO's current ACm family documentation specifies +40°C.
Hydraulic Performance
The 3ACm45 is designed to provide relatively high head from a compact 0.45 kW motor.
Published performance data gives approximately:
| Flow Rate | Flow | Approx. Head |
|---|---|---|
| 0 L/min | 0 m³/h | 38 m |
| 5 L/min | 0.3 m³/h | 36.5 m |
| 10 L/min | 0.6 m³/h | 35 m |
| 15 L/min | 0.9 m³/h | 34 m |
| 20 L/min | 1.2 m³/h | 32.5 m |
| 25 L/min | 1.5 m³/h | 31 m |
| 30 L/min | 1.8 m³/h | 29.5 m |
| 40 L/min | 2.4 m³/h | 25 m |
| 50 L/min | 3.0 m³/h | 20 m |
| 60 L/min | 3.6 m³/h | 15.5 m |
| 70 L/min | 4.2 m³/h | 10 m |
The published curve therefore shows that the pump's maximum head is approximately 38 m, while its high-flow end is around 70 L/min / 4.2 m³/h. The two values should not be interpreted as occurring simultaneously.
Three-Stage Multistage Design
The "3" in the 3ACm45 model designation refers to its three impeller stages.
A multistage pump places several hydraulic stages in series. Each stage contributes additional pressure/head, allowing a relatively small motor to produce considerably higher pressure than a conventional single-stage pump of similar size.
This makes the 3ACm45 appropriate for applications requiring:
- Higher water pressure
- Moderate flow
- Compact pump dimensions
- Domestic water boosting
- Garden irrigation
- Long pipe runs
- Small pressure systems
The three-stage configuration is one of the main reasons the 3ACm45 can achieve approximately 38 m maximum head from a 0.45 kW motor.
0.45 kW / 0.6 HP Motor
The pump is equipped with a 0.45 kW / 0.6 HP single-phase motor.
The motor uses copper windings and incorporates thermal protection for the single-phase configuration. LEO documentation specifies Class F insulation and IPX4 protection for the motor.
Key motor characteristics:
- Power: 0.45 kW
- Power rating: 0.6 HP
- Supply: 220–240V
- Single phase
- Copper winding
- Built-in thermal protection
- Class F insulation
- IPX4 protection
Self-Priming Function
The ACm series is described by LEO as having a self-priming function, which allows the pump to be used in suitable suction-lift installations. LEO specifies a maximum suction height of approximately 8 m for the series.
This is useful when the pump is installed above the water source.
However, proper initial filling/priming and an airtight suction line are still necessary. Self-priming does not mean the pump can safely run without water.
1" × 1" Connections
The 3ACm45 uses:
Suction: 1"
Discharge: 1"
The compact 1" × 1" connection arrangement is appropriate for domestic water supply, garden irrigation and small pressure-boosting installations.
For optimum performance:
- Use appropriately sized suction piping.
- Keep the suction line short.
- Minimize elbows.
- Avoid unnecessary restrictions.
- Ensure all suction joints are airtight.
- Use an appropriate foot valve or strainer where required.
Pump Construction
The 3ACm45 uses a cast-iron pump body and support with anti-rust treatment. The shaft is manufactured from AISI 304 stainless steel.
The hydraulic assembly uses thermoplastic components. The published LEO material breakdown identifies the impeller and diffuser components as Noryl/PPO-type thermoplastic materials in this ACm family.
This construction provides a combination of:
- Corrosion resistance at the shaft
- Low hydraulic weight
- Compact dimensions
- Reduced operating noise
- Durable cast-iron pump support/body
AISI 304 Stainless-Steel Shaft
The AISI 304 stainless-steel shaft provides corrosion resistance and mechanical durability in normal clean-water service.
It is particularly useful in a multistage arrangement because the shaft drives all three hydraulic stages.
Mechanical Seal
The 3ACm45 uses a carbon/ceramic mechanical seal.
The mechanical seal prevents water from travelling along the rotating shaft into the motor section.
Correct priming and avoiding dry running are essential to prevent premature seal damage.
Suitable Fluids
The 3ACm45 is intended primarily for clean water and liquids with physical and chemical properties comparable to water. LEO specifies this as the main application for the ACm series.
Suitable applications include:
- Clean fresh water
- Treated water
- Tank water
- Clean well water
- Irrigation water
- Domestic water
- General service water
It should not be used for abrasive slurry, heavily contaminated wastewater or chemically aggressive liquids without checking material compatibility first.
Applications
The LEO 3ACm45 is suitable for:
- Domestic water supply
- Household water boosting
- Garden irrigation
- Agricultural irrigation
- Small sprinkler systems
- Water transfer
- Tank filling
- Pressure boosting
- Long-distance water transfer
- Light industrial water supply
- Water circulation
- HVAC-related circulation applications
- Supporting equipment
LEO identifies the ACm family for industrial use, water supply, pressure boosting, fire systems, garden irrigation, long-distance water transfer, air-conditioning systems and water circulation.
Domestic Water Supply
The 3ACm45 can be used for domestic water systems where the required flow and pressure fall within the pump curve.
Typical applications include:
- House water supply
- Storage-tank transfer
- Small pressure-boosting systems
- Water distribution
- Garden taps
- Residential irrigation
Its relatively compact size makes it suitable where installation space is limited.
Garden & Agricultural Irrigation
The pump is well suited to small irrigation installations.
Applications include:
- Garden irrigation
- Lawn sprinklers
- Small farms
- Nursery irrigation
- Greenhouse irrigation
- Small orchard systems
- Water transfer from storage tanks
At approximately 70 L/min, the pump can provide up to approximately 4.2 m³/h at the high-flow end of the published performance range.
The actual flow available at sprinklers will depend on elevation, pipe friction, fittings and required operating pressure.
Pressure Boosting
The 3ACm45's multistage design makes it useful for pressure-boosting applications.
Potential applications include:
- Low-pressure domestic water systems
- Shower pressure boosting
- Garden pressure boosting
- Tank outlet boosting
- Small irrigation pressure systems
- Long pipe runs
Pump selection should be based on the required operating point rather than simply choosing the highest possible head.
Fire-Fighting Applications
LEO lists fire-fighting/pressure applications among the applications of the broader ACm range.
However, the 3ACm45 should not automatically be represented as a certified fire pump. A fire-protection installation must satisfy the applicable local regulations, required duty point and certification requirements.
Maximum Suction Height
The specified maximum suction height is approximately 8 m.
Actual suction performance can be affected by:
- Atmospheric pressure
- Installation altitude
- Water temperature
- Suction pipe diameter
- Suction pipe length
- Number of fittings
- Water level
- Air leakage
- Friction losses
For suction-lift installations, the suction line should be as short and airtight as possible.
Motor Protection
The motor incorporates thermal protection, which helps protect the winding against overheating under abnormal operating conditions.
The published motor specification includes:
Insulation: Class F
Protection: IPX4
Thermal protection: Built-in
Motor winding: Copper
The pump should nevertheless be installed with appropriate electrical protection and grounding.
Installation Recommendations
For reliable operation:
- Install the pump on a firm and level surface.
- Position the pump close to the water source.
- Keep the suction pipe short and direct.
- Use correctly sized 1" suction piping.
- Ensure suction joints are completely airtight.
- Install a suitable strainer/foot valve where required.
- Support the connected pipework independently.
- Avoid excessive bends and restrictions.
- Prime the pump before operation.
- Confirm adequate water supply.
- Ensure correct electrical grounding.
- Do not operate the pump dry.
- Protect the motor from direct water exposure.
- Operate within the published hydraulic curve.
Maintenance
Recommended maintenance includes:
- Inspecting for water leakage
- Checking the mechanical seal
- Checking suction connections
- Cleaning the suction strainer
- Checking the impeller stages
- Inspecting diffusers
- Checking electrical terminals
- Monitoring motor temperature
- Checking for abnormal vibration
- Checking for unusual noise
- Monitoring pressure and flow
- Inspecting valves and pipework
Product Dimensions
Published technical information for the 3ACm45 gives approximately:
Length: 356 mm
Width: 180 mm
Height: 182 mm
Suction: 1"
Discharge: 1"
A published packaging specification gives approximately 13.2 kg gross weight with packaging dimensions of approximately 405 × 210 × 215 mm.
3ACm45 vs 4ACm60
| Specification | 3ACm45 | 4ACm60 |
|---|---|---|
| Number of Stages | 3 | 4 |
| Motor Power | 0.45 kW | 0.60 kW |
| Motor Rating | 0.6 HP | 0.85 HP |
| Supply | 220–240V | 220–240V |
| Maximum Head | Approx. 38 m | Approx. 49 m |
| Maximum Flow | Approx. 70 L/min | Approx. 70 L/min |
| Connection | 1" × 1" | 1" × 1" |
| Maximum Suction | 8 m | 8 m |
| Main Difference | Compact lower-power model | Higher head/power model |
The 4ACm60 uses one additional stage and a higher-power motor, providing substantially greater head capability.
Key Advantages
Three-Stage Hydraulic Design: Provides relatively high pressure from a compact pump.
0.6 HP Motor: Suitable for domestic, irrigation and light-duty pressure applications.
Approx. 38 m Maximum Head: Useful for pressure boosting and moderate elevation requirements.
Up to Approx. 70 L/min: Provides useful flow for domestic and irrigation applications.
AISI 304 Shaft: Provides good corrosion resistance.
Thermoplastic Hydraulic Components: Help keep the multistage assembly compact and efficient.
Self-Priming Capability: Suitable for appropriate suction-lift installations.
1" Connections: Convenient for common domestic and irrigation pipework.
220–240V Single Phase: Convenient for installations with standard single-phase electrical supply.
Product Summary
The LEO 3ACm45 is a 0.45 kW / 0.6 HP, 220–240V single-phase, three-stage horizontal multistage centrifugal pump designed for clean-water transfer, domestic water supply, pressure boosting, garden irrigation, agricultural irrigation and light industrial applications. It uses 1" × 1" connections, an AISI 304 stainless-steel shaft, thermoplastic hydraulic components and a carbon/ceramic mechanical seal.
Inquiry - LEO MULTISTAGE CENTRIFUGAL PUMPS - 3ACM 45