B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO SEMI-OPEN IMPELLER S/S CENTRIFUGAL PUMPS - ABK120



LEO Group Pump ABK120 is a stainless-steel centrifugal pump equipped with a semi-open impeller, designed for transferring clean water as well as liquids containing suspended impurities. Its semi-open impeller configuration provides better tolerance to solids than a conventional closed-impeller centrifugal pump, making it suitable for wastewater, food and beverage processing, agriculture and general industrial applications.

Product Overview

The LEO ABK120 features an AISI 304 stainless-steel pump body and shaft, providing good corrosion resistance and durability in demanding pumping environments. The semi-open impeller is particularly useful where the pumped liquid may contain small particles or impurities.

The ABK120 is rated at approximately 0.9 kW, with a nominal flow of 12 m³/h and nominal head of 10 m at approximately 2,900 rpm. Manufacturer documentation identifies the ABK120 as suitable for applications where the liquid contains impurities and states that the pump can operate at full head without motor overload.

Key Features

  • Brand: LEO
  • Series: ABK Series
  • Model: ABK120
  • Pump Type: Stainless Steel Centrifugal Pump
  • Impeller Type: Semi-open impeller
  • Pump Body: AISI 304 stainless steel
  • Shaft: AISI 304 stainless steel
  • Motor Power: 0.9 kW
  • Rated Flow: 12 m³/h
  • Rated Head: 10 m
  • Rated Speed: 2,900 rpm
  • Liquid Temperature: -15°C to +80°C
  • Permitted Liquid pH: 5–9
  • Maximum Ambient Temperature: +40°C
  • Insulation Class: F
  • Protection Class: IPX4
  • Maximum Solid Passage: up to 12 mm according to LEO Europe's ABK series specification.

Note: Some LEO documentation for the ABK120 specifies a maximum solid diameter of 19 mm, while LEO Europe's current ABK series page lists 12 mm for ABK100/120/150. For a technical catalogue, the manufacturer's model-specific documentation should take precedence for the exact production version being supplied.

Technical Specifications

Specification ABK120
Model ABK120
Pump Type Centrifugal Pump
Impeller Semi-Open
Material AISI 304 Stainless Steel
Motor Power 0.9 kW
Speed 2,900 rpm
Rated Flow 12 m³/h
Rated Head 10 m
Typical Flow Range Approximately 100–300 L/min
Head Range Approximately 11–9 m
Suction / Discharge 1½" × 1½"
Liquid Temperature -15°C to +80°C
Liquid pH 5–9
Insulation Class F
Protection IPX4
Ambient Temperature Max. +40°C

A Malaysian product listing for the ABK120 specifies 0.9 kW, 415 V, 50 Hz, with a flow range of approximately 100–300 L/min and head of 11–9 m. For electrical configuration, it is advisable to match the nameplate of the actual unit supplied.

Semi-Open Impeller Design

The semi-open impeller is one of the main advantages of the ABK series. Unlike a fully closed impeller, the semi-open design provides greater tolerance when pumping liquids containing suspended particles and impurities. This makes the ABK120 more suitable for applications such as wastewater transfer, drainage and process liquids where a conventional clean-water centrifugal pump may be more prone to blockage.

The design also makes the pump useful for applications requiring hygienic or corrosion-resistant wetted components, particularly where stainless steel construction is preferred. LEO specifically lists food and beverage processing, industrial and domestic sewage systems, farming, and river and lake water pumping among the intended applications.

Stainless Steel Construction

The AISI 304 stainless-steel pump body and shaft provide resistance to corrosion and contribute to a robust construction. The material is appropriate for general water applications and many mildly corrosive liquids, subject to compatibility with the specific pumped medium.

The ABK series also uses a silicon-carbide/graphite mechanical seal, according to LEO Europe's component information.

Motor & Protection

The ABK series motor is designed for continuous pumping applications and incorporates a copper winding motor construction. Single-phase versions are equipped with an integrated thermal protector to help protect the motor against overheating.

The motor uses Class F insulation and has an IPX4 protection rating. The maximum recommended ambient temperature is +40°C.

Recommended Applications

The LEO ABK120 can be used for:

  • Industrial wastewater transfer
  • Domestic wastewater systems
  • General drainage applications
  • Food and beverage processing
  • Agricultural water transfer
  • Farm and livestock water systems
  • Pumping water from rivers and lakes
  • Transfer of liquids containing suspended impurities
  • Lightly corrosive liquid transfer
  • General industrial process-water applications
  • Circulation and transfer systems
  • Applications requiring stainless-steel pump construction

Performance & Operating Range

The ABK120 provides a practical combination of moderate flow and relatively low-to-medium pumping head. At its nominal operating point, the manufacturer's documentation specifies approximately 12 m³/h at 10 m head. The pump operates at approximately 2,900 rpm.

For actual system selection, the pump should be selected according to the required duty point rather than maximum flow or maximum head alone. Pipe diameter, static head, friction losses, liquid characteristics and the quantity/size of suspended solids should all be considered.

Product Advantages

The main advantages of the LEO ABK120 include:

  1. Semi-open impeller – Better suited to liquids containing impurities compared with conventional closed-impeller pumps.
  2. AISI 304 stainless-steel construction – Provides corrosion resistance and durability.
  3. 0.9 kW motor – Suitable for moderate-duty water and liquid-transfer applications.
  4. 12 m³/h nominal capacity – Provides useful flow for industrial, agricultural and drainage applications.
  5. Wide liquid-temperature range – Suitable for liquids from approximately -15°C to +80°C, subject to the applicable operating conditions.
  6. Class F insulation – Provides enhanced thermal insulation capability.
  7. IPX4 motor protection – Provides protection against water splashing from different directions.
  8. Compact monoblock construction – Pump and motor are integrated into a relatively compact unit.
  9. Versatile applications – Suitable for wastewater, agriculture, food processing and general industrial liquid transfer.

SEO Product Description

LEO ABK120 Semi-Open Impeller Stainless Steel Centrifugal Pump 0.9kW is a durable and versatile centrifugal pump designed for transferring water, wastewater and liquids containing suspended impurities. Featuring an AISI 304 stainless-steel pump body and shaft with a semi-open impeller, the ABK120 provides improved resistance to corrosion and reduced susceptibility to blockage when handling liquids with small solid particles.

Powered by a 0.9 kW motor and operating at approximately 2,900 rpm, the LEO ABK120 delivers a nominal flow of 12 m³/h at a 10 m head. It is suitable for industrial and domestic wastewater systems, food and beverage processing, agriculture, farming, river and lake water pumping and various general liquid-transfer applications. With Class F insulation, IPX4 motor protection and a liquid-temperature capability of up to +80°C, the ABK120 is suitable for a broad range of commercial and industrial pumping requirements.



 Inquiry - LEO SEMI-OPEN IMPELLER S/S CENTRIFUGAL PUMPS - ABK120