The LEO ABK300 is a stainless-steel centrifugal pump with a semi-open impeller, designed for transferring water and liquids containing impurities, suspended particles and small solids. Its AISI 304 stainless-steel construction provides good corrosion resistance, while the semi-open impeller makes it better suited to applications where a conventional closed-impeller pump may be susceptible to clogging. LEO specifies the ABK series for industrial and domestic wastewater, food and beverage processing, agriculture, river/lake water pumping and other liquid-transfer applications.
Product Overview
The ABK300 is one of the larger models in LEO's ABK semi-open impeller range. The model is available in a 2.2 kW configuration, with Malaysian catalogue information specifying a 415 V, 3-phase motor, 50 Hz, and a 2-pole motor arrangement. Its published operating range is approximately 100–950 L/min, with a head range of approximately 15–7.5 m.
The pump uses a 2½-inch inlet and 2-inch outlet according to the LEO Malaysia catalogue, making it suitable for relatively high-flow water and liquid-transfer systems.
Key Specifications
| Specification | LEO ABK300 |
|---|---|
| Brand | LEO |
| Series | ABK |
| Model | ABK300 |
| Pump Type | Semi-Open Impeller Centrifugal Pump |
| Construction | Stainless Steel |
| Pump Body | AISI 304 Stainless Steel |
| Impeller | AISI 304 Stainless Steel |
| Shaft | AISI 304 Stainless Steel |
| Motor Power | 2.2 kW / 3 HP |
| Voltage | 415 V |
| Phase | 3 Phase |
| Frequency | 50 Hz |
| Motor Speed | 2-Pole / approx. 2,900 rpm |
| Flow Range | 100–950 L/min |
| Flow Range | 6–57 m³/h |
| Head Range | Approx. 15–7.5 m |
| Maximum Solid Passage | 16 mm |
| Inlet | 2½" |
| Outlet | 2" |
| Liquid Temperature | -15°C to +80°C |
| Permitted pH | 5–9 |
| Maximum Ambient Temperature | +40°C |
| Insulation Class | F |
| Protection Class | IPX4 |
| Approx. Packed Weight | 20.7 kg |
LEO Europe's current ABK documentation lists the ABK300 maximum passage diameter as 16 mm, while some regional/product documentation describes larger permissible particle sizes. For technical selection, the specification for the exact production version should be checked against the supplied pump's datasheet/nameplate.
Performance
The ABK300 is designed for high-volume, relatively low-to-medium-head pumping. Its published performance range is approximately:
- Minimum listed flow: 100 L/min
- Maximum listed flow: 950 L/min
- Equivalent flow: approximately 6–57 m³/h
- Maximum listed head: approximately 15 m
- Lower-end operating head: approximately 7.5 m
The pump's performance is determined by the system duty point. Maximum flow and maximum head should not be treated as simultaneous operating conditions. Actual performance depends on pipework, static head, friction losses, liquid characteristics and operating conditions.
Semi-Open Impeller Design
The semi-open impeller is a key feature of the ABK300. Compared with a conventional closed impeller, this configuration provides greater tolerance when pumping liquids containing suspended impurities and small solid particles.
This makes the ABK300 particularly useful for applications where the liquid is not perfectly clean. LEO specifically identifies the ABK range for liquids containing impurities, industrial and domestic sewage systems, food and beverage processing, farming, and river and lake water pumping.
The ABK300's published maximum passage diameter is 16 mm, providing additional clearance for small suspended solids compared with many conventional clean-water centrifugal pumps.
Stainless Steel Construction
The pump's wetted components are designed around AISI 304 stainless steel. LEO specifies the pump body, impeller and shaft in stainless steel, providing good resistance to corrosion and making the pump appropriate for applications where durability, cleanliness and resistance to oxidation are important.
The stainless-steel construction is particularly advantageous in:
- Food-processing environments
- Beverage-processing applications
- Agricultural applications
- Wastewater transfer
- General industrial liquid handling
- Applications involving mildly corrosive liquids
The pump should nevertheless be selected according to the chemical compatibility of the pumped liquid. AISI 304 is not suitable for every corrosive chemical or aggressive process liquid.
Mechanical Seal
The ABK series uses a silicon carbide / graphite mechanical seal. This provides the sealing interface between the rotating shaft and stationary pump components and is suitable for the series' specified liquid and temperature operating conditions.
Motor & Electrical Features
The ABK300 configuration commonly supplied in Malaysia is a 2.2 kW / 3 HP, 415 V, 3-phase, 50 Hz motor. Malaysian LEO catalogue information specifies a 2-pole motor arrangement.
The ABK series incorporates:
- Copper-winding motor construction
- Class F insulation
- IPX4 protection
- Integrated thermal protection on single-phase versions
- Maximum ambient temperature of +40°C
Because the ABK300 is normally supplied in a 3-phase configuration, appropriate external motor overload and short-circuit protection should be provided as part of the electrical installation.
Operating Conditions
The ABK300 is designed for liquids within the following general operating parameters:
Liquid temperature: -15°C to +80°C
pH range: 5–9
Maximum ambient temperature: +40°C
Maximum solid passage: 16 mm
Motor insulation: Class F
Motor protection: IPX4
The liquid temperature and chemical compatibility should always be evaluated for the actual application.
Recommended Applications
The LEO ABK300 is suitable for a wide range of commercial, agricultural and industrial applications, including:
- Industrial wastewater transfer – Suitable for moving wastewater containing small suspended impurities.
- Domestic wastewater systems – Can be used for suitable grey-water and wastewater transfer applications.
- Food and beverage processing – Stainless-steel construction and semi-open impeller design make the pump suitable for selected liquid-transfer and washing processes.
- Agriculture and farming – Suitable for high-volume water transfer, irrigation-related applications and farm water systems.
- River and lake water pumping – Suitable for transferring surface water where suspended impurities may be present.
- Industrial washing systems – The high-flow characteristics make the ABK300 useful for water circulation and transfer in washing equipment.
- Liquid transfer systems – Suitable for moving water and compatible liquids between tanks, process equipment and collection points.
- General industrial pumping – Appropriate where a stainless-steel centrifugal pump with a semi-open impeller is required.
Main Advantages
The LEO ABK300 offers several practical advantages:
- 2.2 kW / 3 HP motor for higher-capacity pumping.
- Semi-open impeller for liquids containing impurities.
- AISI 304 stainless-steel construction for corrosion resistance and durability.
- Up to approximately 950 L/min flow for high-volume transfer.
- Up to approximately 15 m head within the published operating range.
- 16 mm maximum passage diameter according to LEO Europe's current ABK specification.
- 2½" × 2" connection arrangement for high-flow pipework.
- Class F insulation for improved motor thermal capability.
- IPX4 protection for protection against water splashing.
- Suitable for industrial, agricultural, wastewater and food-processing applications.
Product Dimensions & Packaging
LEO Europe's current ABK documentation lists the ABK300 packaged weight at approximately 20.7 kg, with packaging dimensions of approximately 475 × 230 × 275 mm.
Product Description
LEO ABK300 Semi-Open Impeller Stainless Steel Centrifugal Pump 2.2kW / 3HP 415V is a high-capacity stainless-steel centrifugal pump designed for transferring water, wastewater and liquids containing suspended impurities. Equipped with a semi-open AISI 304 stainless-steel impeller, pump body and shaft, the ABK300 provides improved resistance to corrosion and better handling of small suspended solids compared with conventional closed-impeller clean-water pumps.
Powered by a 2.2 kW / 3 HP, 415 V, 3-phase motor, the ABK300 delivers a published flow range of approximately 100–950 L/min with a head range of approximately 15–7.5 m. Its 2½-inch inlet and 2-inch outlet are suited to high-volume liquid-transfer systems.
The ABK300 is suitable for industrial and domestic wastewater systems, food and beverage processing, agriculture, farming, river and lake water pumping, industrial washing systems and general liquid-transfer applications. With AISI 304 stainless-steel construction, Class F insulation, IPX4 motor protection and a semi-open impeller capable of handling small solid particles, the LEO ABK300 is a practical choice for demanding high-flow pumping applications.
SEO Product Title
LEO ABK300 Semi-Open Impeller Stainless Steel Centrifugal Pump 2.2kW 3HP 415V
Short Product Description
LEO ABK300 is a 2.2kW / 3HP 415V 3-phase semi-open impeller stainless-steel centrifugal pump designed for high-volume transfer of water, wastewater and liquids containing impurities. With AISI 304 stainless-steel construction, approximately 100–950 L/min flow, 15–7.5 m head, and 2½" × 2" connections, it is suitable for industrial, agricultural, food-processing, wastewater and general liquid-transfer applications.
Inquiry - LEO SEMI-OPEN IMPELLER S/S CENTRIFUGAL PUMPS - ABK300