B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO SEMI-OPEN IMPELLER S/S CENTRIFUGAL PUMPS - ABK400



The LEO ABK400 is a high-flow stainless-steel centrifugal pump equipped with a semi-open impeller, designed for transferring water and liquids containing suspended impurities or small solid particles. It is particularly suited to applications where sanitary construction, corrosion resistance and resistance to impeller blockage are important.

LEO specifies the ABK series for slightly corrosive liquids, liquids requiring hygienic handling, industrial and domestic wastewater, food and beverage processing, agriculture, and pumping water from rivers and lakes.

Product Overview

The ABK400 is the higher-capacity model in the ABK range and is commonly supplied with a 3.0 kW / 4.0 HP, 415 V, 3-phase, 50 Hz, 2-pole motor in the Malaysian market.

Published Malaysian specifications give the ABK400 a flow range of approximately 100–1,100 L/min and a head range of approximately 17.5–7.5 m. The pump uses 2½" × 2" inlet/outlet connections, making it suitable for high-volume liquid-transfer systems.

The LEO Europe ABK specification identifies the ABK400 as having a maximum solid passage of 19 mm, which is the largest published passage specification within the current ABK range.

Technical Specifications

Specification ABK400
Brand LEO
Series ABK
Model ABK400
Pump Type Semi-Open Impeller Centrifugal Pump
Construction Stainless Steel
Pump Body AISI 304 Stainless Steel
Shaft AISI 304 Stainless Steel
Impeller Semi-Open
Motor Power 3.0 kW / 4.0 HP
Voltage 415 V
Phase 3 Phase
Frequency 50 Hz
Motor Type 2-Pole
Speed Approx. 2,900 rpm
Flow Range 100–1,100 L/min
Flow Range Approx. 6–66 m³/h
Head Range Approx. 17.5–7.5 m
Maximum Solid Passage 19 mm
Inlet 2½"
Outlet 2"
Liquid Temperature -15°C to +80°C
Permitted pH 5–9
Maximum Ambient Temperature +40°C
Insulation Class F
Protection Class IPX4

The electrical configuration and performance figures above combine the LEO ABK technical information with the Malaysian ABK400 listing; the actual motor nameplate should be used as the final reference for the supplied unit.

High-Flow Performance

The ABK400 is intended for applications requiring large water or liquid volumes at relatively modest pumping heads.

Its published range is approximately:

  • Flow: 100–1,100 L/min
  • Equivalent flow: approximately 6–66 m³/h
  • Maximum listed head: approximately 17.5 m
  • Lower-end head: approximately 7.5 m

The stated flow and head values represent the pump's operating performance range rather than a single simultaneous duty point. Actual flow at the installation will depend on static head, pipe diameter, pipe length, fittings, friction losses and the characteristics of the pumped liquid.

Semi-Open Impeller

The semi-open impeller is one of the defining characteristics of the ABK400.

A semi-open impeller provides more clearance around the impeller than a conventional closed impeller, allowing the pump to tolerate suspended impurities and small solids more effectively. LEO specifically positions the ABK series for liquids containing impurities and wastewater applications.

For the ABK400, LEO Europe's specification gives a maximum passage diameter of 19 mm. This makes the model particularly suitable for applications where the liquid is not completely clean and where a standard clean-water centrifugal pump may have a greater risk of blockage.

However, the ABK400 should not be treated as a dedicated solids-handling sewage pump. The size, concentration and nature of the solids should be evaluated before selection.

Stainless-Steel Construction

The ABK series uses AISI 304 stainless steel for the pump body and shaft. This construction provides good corrosion resistance and makes the pump suitable for a variety of water, wastewater, agricultural and food-processing environments.

The stainless-steel construction is particularly useful where:

  • Corrosion resistance is required.
  • Cleanable or hygienic pump construction is preferred.
  • The pumped liquid contains mild contaminants.
  • The pump is exposed to humid or wet operating environments.
  • Long-term durability is required in general industrial service.

AISI 304 is intended for compatible liquids; aggressive chemicals, high chloride concentrations and other highly corrosive fluids require separate material-compatibility evaluation.

Mechanical Seal

The ABK series is designed with a mechanical sealing arrangement suitable for its specified operating conditions. LEO's ABK documentation identifies the series as suitable for liquid temperatures from -15°C to +80°C and liquids within approximately pH 5–9.

These limits are important when selecting the ABK400 for process liquids rather than ordinary water.

Motor Specifications

The ABK400 configuration commonly listed in Malaysia is:

  • Motor power: 3.0 kW / 4.0 HP
  • Voltage: 415 V
  • Phase: 3-phase
  • Frequency: 50 Hz
  • Motor: 2-pole
  • Speed: approximately 2,900 rpm

The ABK motor specification includes Class F insulation and IPX4 protection, with a maximum ambient temperature of +40°C. LEO also specifies integrated thermal protection for single-phase versions of the ABK series.

For the 415 V 3-phase ABK400, appropriate external motor protection, overload protection and electrical isolation should be incorporated into the installation.

Connection Size

The ABK400 is listed with:

Inlet: 2½"
Outlet: 2"

This relatively large connection arrangement complements the pump's high flow capability and helps reduce excessive velocity and pressure losses in correctly sized pipework.

Correct suction-pipe sizing is particularly important. The suction line should be appropriately sized and installed to minimize excessive friction losses and avoid conditions that could cause cavitation.

Operating Conditions

The LEO ABK400 is specified for:

Liquid temperature: -15°C to +80°C
pH: 5–9
Maximum ambient temperature: +40°C
Maximum solid passage: 19 mm
Insulation: Class F
Protection: IPX4

For continuous operation, the actual liquid temperature, viscosity, specific gravity and solids content should be checked against the pump's allowable operating range.

Recommended Applications

The LEO ABK400 is suitable for a broad range of high-volume liquid-transfer applications.

Industrial wastewater: The semi-open impeller provides better tolerance of suspended impurities than a conventional closed impeller.

Domestic wastewater and grey-water systems: Suitable for compatible wastewater transfer where the solids characteristics fall within the pump's allowable passage.

Agriculture: The high flow rate makes the ABK400 suitable for agricultural water transfer, irrigation-related duties and farm water systems.

Food and beverage processing: AISI 304 stainless-steel construction is appropriate for selected hygienic liquid-transfer applications, subject to the specific process requirements.

River and lake water: Suitable for transferring surface water where suspended impurities may be present.

Industrial liquid transfer: Can be used for moving compatible liquids between tanks, collection systems and process equipment.

Washing and cleaning systems: Its high flow capability can be useful for water circulation and transfer duties.

LEO specifically identifies industrial and domestic sewage, food and beverage processing, farming and river/lake water pumping as ABK applications.

Main Advantages

The LEO ABK400 offers:

  1. High flow capacity – Up to approximately 1,100 L/min in the published operating range.
  2. Semi-open impeller – Better tolerance of suspended impurities and small solids.
  3. 19 mm maximum passage – LEO Europe's published specification for the ABK400.
  4. AISI 304 stainless-steel construction – Good corrosion resistance and durability.
  5. 3.0 kW / 4 HP motor – Suitable for higher-capacity transfer duties.
  6. 415 V 3-phase operation – Appropriate for commercial and industrial electrical installations.
  7. 2½" × 2" connections – Suited to high-volume pipework.
  8. 17.5 m maximum published head – Suitable for moderate-head applications.
  9. Class F insulation – Provides enhanced thermal insulation capability.
  10. IPX4 protection – Provides protection against water splashing.
  11. Wide application range – Suitable for agriculture, wastewater, food processing and general industrial liquid transfer.

ABK Series Comparison

Model Motor Voltage Flow Range Head Range Connection
ABK150 1.1 kW / 1.5 HP 415 V 100–550 L/min 9.5–5 m 2" × 2"
ABK200 1.5 kW / 2 HP 415 V 100–700 L/min 12.7–6.5 m 2" × 2"
ABK300 2.2 kW / 3 HP 415 V 100–950 L/min 15–7.5 m 2½" × 2"
ABK400 3.0 kW / 4 HP 415 V 100–1,100 L/min 17.5–7.5 m 2½" × 2"

The comparison shows the ABK400 as the higher-capacity option, offering the greatest published flow and head range among these models.

Product Description

LEO ABK400 Semi-Open Impeller Stainless Steel Centrifugal Pump 3.0kW / 4HP 415V is a high-flow centrifugal pump designed for transferring water, wastewater and compatible liquids containing suspended impurities. Featuring a semi-open impeller and AISI 304 stainless-steel construction, the ABK400 provides improved resistance to corrosion and better tolerance of small solid particles than conventional closed-impeller clean-water pumps.

Powered by a 3.0 kW / 4 HP, 415 V, 3-phase, 50 Hz motor, the ABK400 provides a published flow range of approximately 100–1,100 L/min with a head range of approximately 17.5–7.5 m. Its 2½" inlet and 2" outlet are suitable for high-volume water and liquid-transfer systems.

With a published 19 mm maximum solid passage, Class F insulation and IPX4 protection, the ABK400 is well suited to industrial and domestic wastewater, agriculture, farming, food and beverage processing, river and lake water pumping, industrial washing and general liquid-transfer applications.

SEO Product Title

LEO ABK400 Semi-Open Impeller Stainless Steel Centrifugal Pump 3.0kW 4HP 415V

Short Product Description

LEO ABK400 is a 3.0kW / 4HP 415V 3-phase stainless-steel centrifugal pump with a semi-open impeller, designed for high-volume transfer of water, wastewater and liquids containing suspended impurities. It delivers approximately 100–1,100 L/min with a 17.5–7.5 m head range, features AISI 304 stainless-steel construction, 2½" × 2" connections and a 19 mm maximum solid passage, making it suitable for industrial, agricultural, wastewater, food-processing and general liquid-transfer applications.



 Inquiry - LEO SEMI-OPEN IMPELLER S/S CENTRIFUGAL PUMPS - ABK400