B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO AUTOMATIC SELF-PRIMING PUMP - APSM 37AT



The LEO APSM 37AT is a compact automatic self-priming peripheral water pump with a 0.37 kW / 0.5 HP single-phase motor, designed for domestic water supply, small irrigation systems, automatic sprinkler systems and general clean-water transfer. LEO classifies the APSm-AT range as an automatic self-priming peripheral pump for small living-water supply, automatic sprinklers and small air-conditioning/support equipment.

The APSM 37AT incorporates automatic water detection and operating-status indication, making it more convenient for applications where the pump needs to start and stop automatically according to water demand. Malaysian specifications list a 5–35 L/min flow range, 35–5 m head range and maximum suction of 8 m.

Technical Specifications

Specification LEO APSM 37AT
Brand LEO
Model APSM 37AT
Pump Type Automatic Self-Priming Peripheral Pump
Motor Power 0.37 kW / 0.5 HP
Voltage 220 V
Phase Single Phase
Frequency 50 Hz
Flow Range 5–35 L/min
Maximum Flow Approx. 2.1 m³/h
Head Range 35–5 m
Maximum Head 35 m
Maximum Suction 8 m
Inlet 1"
Outlet 1"
Pump Body Stainless Steel
Impeller Stainless Steel
Shaft AISI 304 Stainless Steel
Motor Winding Copper
Insulation Class F
Protection Class IPX4
Thermal Protection Built-In
Automatic Function Yes
Water Detection Automatic
Operating Indicator Power Up / Running / No Water
Anti-Rust Treatment Yes
Dimensions 300 × 300 × 250 mm
Weight 10.2 kg

The published Malaysian specifications give the APSM 37AT dimensions as 300 × 300 × 250 mm and weight as 10.2 kg.

0.37 kW / 0.5 HP Motor

The APSM 37AT is powered by a 0.37 kW / 0.5 HP motor operating from a 220 V single-phase supply.

This compact motor is intended for relatively low-to-moderate water demand rather than large irrigation or industrial pumping.

It is particularly suitable for:

  • Small houses
  • Garden water supply
  • Automatic sprinklers
  • Small irrigation systems
  • Water transfer
  • Small air-conditioning systems
  • Utility water applications

Automatic Pump Operation

One of the main advantages of the APSM 37AT is its integrated automatic control function.

The pump can automatically detect whether water is available at the inlet and control operation accordingly. The system also provides an operating-status display indicating:

  • Power Up
  • Running
  • No Water

This reduces the need for a separate manual pump switch in suitable installations.

2-Second Delayed Start

The APSM 37AT incorporates a 2-second delayed start.

This feature is designed to reduce the potential danger associated with electrical sparks during immediate starting and contributes to controlled automatic operation.

Self-Priming Function

The self-priming design allows the pump to draw water from a suitable source after the pump and suction line have been correctly prepared.

The specified maximum suction is 8 m.

Typical sources include:

  • Ground tanks
  • Storage tanks
  • Shallow wells
  • Rainwater tanks
  • Reservoirs

Actual suction performance depends on water temperature, pipe size, pipe length, elevation and suction-line airtightness.

35 m Maximum Head

The APSM 37AT has a published maximum head of 35 m, with the listed operating range extending from 35 m down to 5 m.

A 35 m water head corresponds to approximately 3.4 bar of theoretical static pressure.

Maximum head occurs at very low flow, so the pump should not be expected to deliver its maximum flow and maximum head simultaneously.

For proper pump selection, consider the actual required:

Flow + Total Dynamic Head

5–35 L/min Flow Range

The published flow range is 5–35 L/min, equivalent to approximately 0.3–2.1 m³/h.

This flow range makes the APSM 37AT suitable for smaller domestic and garden systems.

Typical uses include:

  • One or several household water outlets
  • Garden hoses
  • Small sprinklers
  • Small irrigation systems
  • Water transfer
  • Utility water supply

The actual flow available decreases as discharge pressure/head increases.

Peripheral Pump Hydraulic Design

The APSM 37AT uses a peripheral-type impeller, which is well suited to applications requiring relatively high pressure from a compact motor.

Compared with a large-flow centrifugal pump, a peripheral pump is generally more appropriate where the application requires:

  • Compact dimensions
  • Moderate flow
  • Relatively high pressure
  • Domestic water boosting
  • Small irrigation

The APSM-AT series is specifically positioned by LEO for small living-water supply, automatic sprinklers and small air-conditioning/support equipment.

Stainless-Steel Pump Body

The APSM 37AT features a stainless-steel pump body. Malaysian specifications also identify the impeller as stainless steel.

The stainless-steel construction provides:

  • Good corrosion resistance
  • Improved durability
  • Suitable performance in humid environments
  • Easy maintenance
  • Clean appearance
  • Better resistance to rust than conventional carbon-steel construction

This is useful for domestic and outdoor water installations.

Stainless-Steel Impeller

The pump is equipped with a stainless-steel impeller.

The impeller is the primary rotating hydraulic component responsible for transferring energy from the motor to the water.

Stainless-steel construction provides good resistance to corrosion in normal clean-water service.

AISI 304 Stainless-Steel Shaft

The shaft is specified as AISI 304 stainless steel.

This provides good corrosion resistance and mechanical durability.

The shaft operates with the impeller and mechanical sealing components and is designed for reliable clean-water pumping.

Copper Motor Winding

The APSM 37AT uses copper motor winding, providing good electrical conductivity and reliable motor performance.

Copper winding is particularly desirable for a pump intended for regular domestic and automatic operation.

Built-In Thermal Protector

The pump incorporates a built-in thermal protector.

The thermal protection helps protect the motor against excessive temperature caused by abnormal operating conditions.

Potential causes of overheating include:

  • Motor overload
  • Restricted ventilation
  • Incorrect electrical supply
  • Mechanical obstruction
  • Excessive ambient temperature
  • Prolonged abnormal operation

The thermal protector is an additional safety feature and does not replace proper electrical circuit protection.

Class F Insulation

The APSM 37AT motor is specified with Class F insulation.

Class F insulation provides good thermal resistance and is suitable for normal continuous-duty motor operation when the pump is correctly installed and operated.

IPX4 Protection

The motor is specified with IPX4 protection.

This provides protection against water splashing from different directions.

However, the pump should not be:

  • Submerged
  • Installed in standing water
  • Exposed to direct high-pressure water spray
  • Installed where flooding is likely

For outdoor installations, a dry and adequately ventilated pump location is recommended.

Automatic No-Water Protection

The APSM 37AT provides automatic detection related to water availability at the pump inlet and includes a No Water operating indication.

This is particularly useful for installations connected to:

  • Storage tanks
  • Water reservoirs
  • Rainwater systems
  • Shallow wells
  • Domestic water sources

However, correct suction-pipe installation and adequate water supply remain essential.

1" Inlet and Outlet

The APSM 37AT uses 1" × 1" inlet and outlet connections.

These connections are common for domestic and garden water systems.

For best performance:

  • Use appropriately sized suction piping.
  • Avoid excessive bends.
  • Minimize suction-side restrictions.
  • Ensure all connections are airtight.
  • Use a suitable foot valve/check valve where required.

Reducing the suction pipe unnecessarily can increase friction losses and negatively affect self-priming performance.

Domestic Water Supply

The APSM 37AT is designed for small domestic water-supply applications.

Possible uses include:

  • Household water transfer
  • Storage tank supply
  • Outdoor tap supply
  • Garden tap boosting
  • Small domestic pressure systems
  • Utility water supply

For larger homes with multiple simultaneous outlets or high-pressure requirements, a larger LEO pump may be more appropriate.

Garden Irrigation

The pump is suitable for small garden irrigation systems.

Applications include:

  • Garden hoses
  • Small sprinklers
  • Flower-bed irrigation
  • Small lawn irrigation
  • Vegetable gardens
  • Greenhouse irrigation

Its 5–35 L/min operating range is appropriate for relatively small irrigation requirements.

Automatic Sprinkler Systems

LEO specifically identifies the APSm-AT range as suitable for automatic water sprinkler systems.

The automatic operation is useful when the sprinkler system requires the pump to respond to changes in water demand.

Small Air-Conditioning Systems

LEO also lists small air-conditioning systems or supporting equipment among the intended applications for the APSm-AT range.

The suitability depends on the required flow, head, water temperature and system configuration.

Clean-Water Applications

The APSM 37AT is intended for clean water or liquids with physical and chemical characteristics similar to water.

Suitable liquids may include:

  • Fresh water
  • Filtered rainwater
  • Storage-tank water
  • Groundwater with low sediment content
  • Irrigation water

It should not be used for:

  • Sewage
  • Mud
  • Sludge
  • Heavy sand
  • Abrasive slurry
  • Fibrous wastewater
  • Liquids containing large solids

Where the water source contains sediment, appropriate filtration should be considered.

Automatic Operation Benefits

The automatic system provides several practical advantages:

  • Automatic start/stop operation
  • Reduced manual intervention
  • Water-availability detection
  • Operating-status indication
  • No-water indication
  • Convenient domestic operation
  • Suitable for demand-based water supply

This makes the APSM 37AT particularly suitable for homeowners who want a compact automatic pump rather than a manually switched water pump.

Typical Applications

The LEO APSM 37AT can be used for:

  1. Small domestic water supply
  2. Garden irrigation
  3. Automatic sprinkler systems
  4. Water tank transfer
  5. Rainwater distribution
  6. Small household water boosting
  7. Shallow-well water supply
  8. Small air-conditioning support systems
  9. Small utility-water systems
  10. General clean-water transfer

Key Advantages

The LEO APSM 37AT offers:

  • 0.37 kW / 0.5 HP motor
  • 220 V single-phase operation
  • 5–35 L/min flow range
  • 35 m maximum head
  • 8 m maximum suction
  • 1" × 1" connections
  • Automatic self-priming operation
  • Automatic water detection
  • No-water protection/detection
  • 2-second delayed start
  • Operating-status display
  • Stainless-steel pump body
  • Stainless-steel impeller
  • AISI 304 stainless-steel shaft
  • Copper motor winding
  • Built-in thermal protection
  • Class F insulation
  • IPX4 protection
  • Anti-rust treatment for wetted components
  • Compact domestic design

Installation Recommendations

For optimum performance:

  • Install the pump on a firm, level surface.
  • Position it as close as practical to the water source.
  • Keep the suction pipe short and straight.
  • Use the correct 1" suction connection.
  • Ensure all suction connections are airtight.
  • Install a suitable foot valve/check valve where required.
  • Prime the pump correctly before initial operation.
  • Ensure adequate water is available at the suction source.
  • Do not operate the pump dry.
  • Provide adequate motor ventilation.
  • Protect the pump from flooding.
  • Use appropriate electrical protection and earthing.
  • Clean the suction filter periodically if one is installed.

Product Description

LEO APSM 37AT 0.37kW 0.5HP Automatic Self-Priming Peripheral Water Pump is a compact automatic water pump designed for small domestic water supply, garden irrigation, automatic sprinkler systems, water transfer and small air-conditioning support applications. It delivers a flow range of 5–35 L/min, with a maximum head of 35 m and maximum suction of 8 m.

The pump features automatic water detection, no-water protection/detection, operating-status indication and a 2-second delayed start, reducing the need for manual pump operation. Its stainless-steel pump body and impeller, AISI 304 stainless-steel shaft, copper winding, built-in thermal protection, Class F insulation and IPX4 protection provide reliable performance for normal clean-water applications.

With its 0.5 HP motor, compact design and automatic self-priming function, the LEO APSM 37AT is well suited to homeowners, gardens and small water systems requiring convenient automatic pumping.

SEO Product Title

LEO APSM 37AT 0.37kW 0.5HP 220V Automatic Self-Priming Peripheral Water Pump

Short Product Description

LEO APSM 37AT is a 0.37kW / 0.5HP 220V automatic self-priming peripheral water pump designed for small domestic water supply, garden irrigation, automatic sprinklers, water transfer and small air-conditioning support systems. It provides 5–35 L/min flow, up to 35 m head and up to 8 m suction, with 1" × 1" connections. The pump features automatic water detection, no-water protection, operating-status display, stainless-steel pump body and impeller, AISI 304 shaft, copper winding, thermal protection, Class F insulation and IPX4 protection.



 Inquiry - LEO AUTOMATIC SELF-PRIMING PUMP - APSM 37AT