The LEO APSM 60AT is an automatic self-priming peripheral water pump powered by a 0.6 kW / 0.8 HP single-phase motor. It is designed for domestic water supply, garden irrigation, automatic sprinkler systems, water transfer, pressure boosting and other small clean-water applications. LEO identifies the APSm-AT series for clean-water transfer, small domestic water supply, automatic sprinklers and small air-conditioning/support equipment.
The APSM 60AT provides a published 5–40 L/min flow range, 5–40 m head range, and 8 m maximum suction, with 1" × 1" inlet/outlet connections. Malaysian suppliers list the model at 0.6 kW / 0.8 HP and 220 V.
Technical Specifications
| Specification | LEO APSM 60AT |
|---|---|
| Brand | LEO |
| Model | APSM 60AT |
| Pump Type | Automatic Self-Priming Peripheral Pump |
| Motor Power | 0.6 kW / 0.8 HP |
| Voltage | 220 V |
| Phase | Single Phase |
| Frequency | 50 Hz |
| Flow Range | 5–40 L/min |
| Maximum Flow | Approx. 2.4 m³/h |
| Head Range | 40–5 m |
| Maximum Head | 40 m |
| Maximum Suction | 8 m |
| Inlet | 1" |
| Outlet | 1" |
| Pump Body | Stainless Steel |
| Impeller | Stainless Steel |
| Shaft | AISI 304 Stainless Steel |
| Motor Winding | Copper |
| Insulation Class | F |
| Protection Class | IPX4 |
| Thermal Protection | Built-In |
| Automatic Function | Yes |
| Water Detection | Automatic |
| No-Water Protection | Yes |
| Operating Display | Power Up / Running / No Water |
| Start Delay | 2 seconds |
| Dimensions | 300 × 300 × 250 mm |
| Weight | 10.2 kg |
The flow, head, suction, power, connection sizes, dimensions and weight above are published by Malaysian LEO distributors.
0.6 kW / 0.8 HP Motor
The APSM 60AT uses a 0.6 kW / 0.8 HP motor operating on a 220 V single-phase electrical supply. This places it between the APSM 37AT and APSM 75AT models in the same automatic self-priming range.
The 0.8 HP motor is suitable for applications requiring more capacity than a small 0.5 HP domestic pump while remaining compact enough for residential installations.
Typical applications include:
- Domestic water supply
- Garden irrigation
- Automatic sprinklers
- Water tank transfer
- Small pressure-boosting systems
- Utility water supply
- Small air-conditioning support systems
Automatic Self-Priming Operation
The major feature of the APSM 60AT is its automatic self-priming and automatic control system.
The pump can automatically detect water availability at the inlet and control its operation according to demand. It also provides an operating-status display showing Power Up, Running and No Water conditions.
This makes it convenient for applications where frequent manual switching of the pump is undesirable.
2-Second Delayed Start
The APSM 60AT incorporates a 2-second delayed starting function. The delay is designed to reduce potential hazards associated with electrical sparks during immediate starting.
This is particularly useful for an automatic pump because the motor may start whenever the system detects a demand for water.
40 m Maximum Head
The APSM 60AT has a published maximum head of 40 m, with the stated performance range extending from approximately 40 m down to 5 m.
A 40 m water head corresponds to approximately 3.9 bar of theoretical static pressure.
The 40 m figure is the maximum pressure/head capability at very low flow. It should not be interpreted as the pressure available when the pump is delivering its maximum 40 L/min flow.
Actual performance depends on:
- Vertical elevation
- Pipe length
- Pipe diameter
- Pipe fittings
- Valves
- Filters
- Required outlet pressure
- Water temperature
- System resistance
5–40 L/min Flow Range
The published flow range is 5–40 L/min, equivalent to approximately 0.3–2.4 m³/h.
This makes the pump suitable for small-to-medium domestic water requirements and garden applications.
The relationship between flow and head should be understood as:
Higher head → lower available flow
Lower head → higher available flow
Therefore, the pump's actual operating flow should be selected from its hydraulic performance curve for the intended system.
8 m Maximum Suction
The APSM 60AT has a published maximum suction capability of 8 m.
This allows the pump to be installed above a suitable water source, subject to correct suction-pipe installation and actual site conditions.
Possible sources include:
- Ground storage tanks
- Rainwater tanks
- Shallow wells
- Reservoirs
- Water collection tanks
Actual suction performance can be affected by:
- Suction-pipe diameter
- Suction-pipe length
- Number of bends
- Foot valve
- Water temperature
- Air leaks
- Atmospheric pressure
- Water-level fluctuations
For best performance, position the pump as close to the water source as practical.
Peripheral Pump Design
The APSM 60AT uses a peripheral hydraulic design.
Peripheral pumps are particularly useful where the application requires relatively high head from a compact pump package while the required flow rate is moderate.
The design is well suited to:
- Domestic pressure boosting
- Small irrigation systems
- Automatic sprinkler systems
- Water transfer
- Household utility-water applications
LEO specifically positions the APSm series for small domestic water supply, automatic sprinklers and small air-conditioning systems or supporting equipment.
Stainless-Steel Construction
The APSM 60AT is specified with a stainless-steel pump body and stainless-steel impeller.
This provides good resistance to corrosion and makes the pump suitable for humid domestic and outdoor environments.
Advantages include:
- Corrosion resistance
- Improved durability
- Reduced rusting
- Easy cleaning
- Suitable for outdoor water systems
- Long service potential under correct operating conditions
Stainless-Steel Impeller
The stainless-steel impeller is responsible for transferring mechanical energy from the motor to the water.
The stainless-steel construction provides good resistance to corrosion during normal clean-water operation.
The pump should nevertheless be protected from highly abrasive water, heavy sediment and unsuitable chemical liquids.
AISI 304 Stainless-Steel Shaft
The pump uses an AISI 304 stainless-steel shaft.
The shaft transfers rotational power from the motor to the impeller and is exposed to the pump's operating environment.
AISI 304 provides good corrosion resistance for typical clean-water applications.
Copper Motor Winding
The APSM 60AT uses a copper-wound motor.
Copper provides good electrical conductivity and is widely used for reliable motor winding construction.
Correct voltage, overload protection and adequate ventilation remain important for long-term motor performance.
Built-In Thermal Protection
The pump incorporates a built-in thermal protector.
This helps protect the motor against excessive temperature caused by abnormal operating conditions.
Potential causes of overheating include:
- Motor overload
- Mechanical obstruction
- Incorrect voltage
- Restricted ventilation
- Excessive ambient temperature
- Prolonged abnormal operation
Thermal protection should be considered an additional safety mechanism and not a replacement for suitable electrical protection.
Class F Insulation
The motor is specified with Class F insulation.
This provides good thermal resistance for normal motor operation and is appropriate for the pump's intended domestic and light commercial applications.
IPX4 Protection
The APSM 60AT has an IPX4 protection rating.
This provides protection against water splashing from different directions.
The pump should still be installed in a location protected from:
- Flooding
- Standing water
- Submersion
- Direct high-pressure spray
- Severe weather exposure
Automatic No-Water Protection
The pump includes automatic detection of water coming from the pump inlet and a No Water status indication.
This is useful when the pump is connected to a tank, reservoir or other variable water source.
The feature helps reduce the risk associated with operating without adequate water, but proper installation and adequate water supply are still required.
1" × 1" Connections
The APSM 60AT uses 1-inch inlet and 1-inch outlet connections.
These connections are convenient for common domestic plumbing and garden irrigation systems.
For the suction side, avoid unnecessarily reducing the pipe diameter or using excessive elbows because these increase friction losses and can make self-priming more difficult.
Domestic Water Supply
The APSM 60AT can be used for domestic water supply where the required flow and pressure fall within the pump's performance range.
Applications include:
- Household water transfer
- Storage-tank supply
- Outdoor taps
- Garden taps
- Small pressure-boosting systems
- Utility water supply
For larger houses with multiple high-demand outlets operating simultaneously, a larger pump or booster system may be more appropriate.
Garden Irrigation
The APSM 60AT is suitable for garden and small irrigation applications.
Typical uses include:
- Garden hoses
- Lawn sprinklers
- Flower-bed irrigation
- Vegetable gardens
- Greenhouses
- Landscape irrigation
- Small agricultural plots
The automatic function allows the pump to operate conveniently with demand-based water systems.
Automatic Sprinkler Systems
LEO identifies the APSm-AT series as suitable for automatic water sprinkler systems.
The pump's automatic control makes it suitable for systems where water demand changes depending on sprinkler operation.
Before installation, verify that the sprinkler system's required pressure and flow fall within the pump's performance curve.
Water Tank Transfer
The APSM 60AT can be used to transfer clean water between tanks.
Examples include:
Ground tank → APSM 60AT → elevated tank
Rainwater tank → APSM 60AT → garden
Storage tank → APSM 60AT → domestic water system
The total vertical lift and pipe friction must be considered when determining the actual flow.
Clean-Water Applications
LEO specifies the APSm-AT series for transferring clean water or liquids with physical and chemical characteristics similar to water.
Suitable applications can include:
- Fresh water
- Filtered rainwater
- Storage-tank water
- Clean groundwater
- Irrigation water
- Utility water
The pump is not intended for:
- Sewage
- Sludge
- Mud
- Heavy sand
- Abrasive slurry
- Fibrous wastewater
- Liquids containing large solids
Where water contains sediment, a suitable filter should be installed.
Low-Noise Operation
The APSM automatic pump range is designed with a compact motor and peripheral hydraulic system. Malaysian listings also identify low-noise and long-life bearing characteristics for the series.
Correct installation on a stable surface is important for minimizing vibration and transmitted noise.
Compact Dimensions
The APSM 60AT has published dimensions of approximately 300 × 300 × 250 mm and a weight of 10.2 kg.
Its compact footprint makes it practical for:
- Residential pump rooms
- Utility areas
- Garden pump installations
- Water-tank areas
- Small equipment rooms
Adequate clearance should still be provided for ventilation and servicing.
Applications
The LEO APSM 60AT is suitable for:
- Domestic water supply
- Garden irrigation
- Automatic sprinkler systems
- Water tank transfer
- Small water pressure boosting
- Rainwater distribution
- Shallow-well water supply
- Small air-conditioning support systems
- Small commercial water systems
- General clean-water transfer
- Household utility-water applications
- Landscape irrigation
Key Advantages
The LEO APSM 60AT provides:
- 0.6 kW / 0.8 HP motor
- 220 V single-phase operation
- 5–40 L/min flow
- 40 m maximum head
- 8 m maximum suction
- 1" × 1" pipe connections
- Automatic self-priming operation
- Automatic water detection
- No-water protection
- 2-second delayed start
- Power/Running/No-Water status indication
- Stainless-steel pump body
- Stainless-steel impeller
- AISI 304 stainless-steel shaft
- Copper motor winding
- Built-in thermal protection
- Class F insulation
- IPX4 protection
- Compact construction
- Suitable for domestic and garden applications
Installation Recommendations
For reliable operation:
- Install the pump on a firm and level surface.
- Place the pump as close to the water source as practical.
- Keep the suction pipe as short and straight as possible.
- Use an appropriately sized 1" suction pipe.
- Ensure every suction connection is airtight.
- Install a suitable foot valve/check valve where required.
- Prime the pump correctly before initial operation.
- Do not operate the pump without sufficient water.
- Protect the pump from flooding.
- Provide adequate motor ventilation.
- Install appropriate electrical protection and earthing.
- Clean suction filters regularly where sediment is present.
- Avoid excessive restrictions on the suction side.
APSM 60AT vs APSM 37AT vs APSM 75AT
| Specification | APSM 37AT | APSM 60AT | APSM 75AT |
|---|---|---|---|
| Motor | 0.37 kW / 0.5 HP | 0.6 kW / 0.8 HP | 0.75 kW / 1.0 HP |
| Flow | 5–35 L/min | 5–40 L/min | 5–45 L/min |
| Maximum Head | 35 m | 40 m | 50 m |
| Inlet / Outlet | 1" × 1" | 1" × 1" | 1" × 1" |
| Maximum Suction | 8 m | 8 m | 8 m |
| Pump Type | Automatic Self-Priming Peripheral | Automatic Self-Priming Peripheral | Automatic Self-Priming Peripheral |
| Typical Use | Small domestic systems | Domestic / garden / irrigation | Higher-demand domestic systems |
The three models are part of the same APSm-AT automatic self-priming range, with the APSM 60AT occupying the middle position in power, flow and head capability.
Product Description
LEO APSM 60AT 0.6kW 0.8HP Automatic Self-Priming Peripheral Water Pump is a compact and reliable automatic water pump designed for domestic water supply, garden irrigation, automatic sprinkler systems, water tank transfer, pressure boosting and small clean-water applications. It provides a published 5–40 L/min flow range, up to 40 m maximum head and up to 8 m maximum suction, with standard 1" × 1" inlet and outlet connections.
The APSM 60AT features automatic water detection, no-water protection, 2-second delayed start and Power Up/Running/No Water status indication. Its construction includes a stainless-steel pump body and impeller, AISI 304 stainless-steel shaft, copper motor winding, built-in thermal protection, Class F insulation and IPX4 protection.
With its 0.8 HP motor and automatic self-priming operation, the APSM 60AT is a practical solution for homeowners, gardens, small irrigation systems and light-duty water-transfer applications where automatic pump operation and moderate pressure are required.
SEO Product Title
LEO APSM 60AT 0.6kW 0.8HP 220V Automatic Self-Priming Peripheral Water Pump
Short Product Description
LEO APSM 60AT is a 0.6kW / 0.8HP 220V automatic self-priming peripheral water pump designed for domestic water supply, garden irrigation, automatic sprinklers, water tank transfer and pressure boosting. It delivers 5–40 L/min flow, up to 40 m head and up to 8 m suction, with 1" × 1" connections. The pump features automatic water detection, no-water protection, 2-second delayed start, operating-status display, stainless-steel pump body and impeller, AISI 304 shaft, copper winding, thermal protection, Class F insulation and IPX4 protection.
Inquiry - LEO AUTOMATIC SELF-PRIMING PUMP - APSM 60AT