B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO INTELLIGENT DEEP WELL PUMPS - LDW-6-35-750E



Product Overview

The LEO LDW-6-35-750E is an intelligent deep well/borehole submersible pump designed for pumping clean water from deep wells, boreholes and water sources for domestic and agricultural water-supply applications. It combines a compact deep-well pump design with an intelligent automatic control system for convenient operation. Available product information identifies the LDW-6-35-750E as a 0.75 kW (1 HP) intelligent LDW-E deep-well pump.

The LDW-E intelligent series is designed with automatic start/stop operation and dry-run protection, helping the pump operate automatically according to the water-demand condition while protecting the motor when sufficient water is unavailable.

Key Product Features

  • Brand: LEO
  • Model: LDW-6-35-750E
  • Pump Type: Intelligent Deep Well / Borehole Submersible Pump
  • Motor Power: 0.75 kW / approximately 1 HP
  • Nominal Head: 35 m
  • Maximum/Model Flow Class: 6 m³/h
  • Application: Clean-water pumping from wells and boreholes
  • Operation: Automatic intelligent control
  • Protection: Dry-run protection
  • Automatic Function: Automatic start and stop
  • Installation: Submersible installation inside a deep well or borehole
  • Typical Outlet Size: 1 inch
  • Electrical Configuration: Single-phase version is listed for this model
  • Construction: Stainless-steel well-pump construction is identified for the LDW-6-35-750E in product listings.

Performance

The “6-35-750” designation corresponds to the LDW model's 6 m³/h flow class, 35 m head class and 750 W motor rating. A separate product listing gives the operating range as approximately 16.6–100 L/min, with a listed head range of approximately 1–35 m. Actual flow varies according to total dynamic head, pipework, installation conditions and system resistance.

Specification Details
Brand LEO
Model LDW-6-35-750E
Series LDW-E Intelligent Deep Well Pump
Pump Type Deep Well / Borehole Submersible Pump
Motor Power 0.75 kW / 1 HP
Nominal Head 35 m
Flow Class 6 m³/h
Approx. Flow Range 16.6–100 L/min
Approx. Head Range 1–35 m
Outlet 1"
Electrical Supply Single Phase
Control Intelligent Automatic
Dry-Run Protection Yes
Automatic Start/Stop Yes
Pump Installation Submersible
Recommended Fluid Clean Water
Primary Application Deep Well / Borehole Water Supply

The exact operating point should be selected from the manufacturer's pump performance curve rather than assuming that 6 m³/h is available at the full 35 m head.

Intelligent Automatic Control

One of the main advantages of the LDW-6-35-750E compared with a conventional deep-well pump is its intelligent control functionality. The LDW-E series is specifically described as providing automatic switching on/off and dry-running protection.

This makes the pump suitable for installations where automatic water delivery is required without relying entirely on manual switching. The integrated protection also helps reduce the risk of motor damage when the pump operates without adequate water.

Construction and Durability

The LDW-6-35-750E is intended for submerged installation in wells and boreholes. Stainless-steel construction is listed for this specific model, providing good resistance to corrosion and making the pump appropriate for continuous exposure to clean groundwater.

The slim deep-well configuration allows the pump to be installed below the water level inside an appropriate borehole or well casing. Proper borehole diameter, immersion depth, water quality and installation clearance should be confirmed before installation.

Recommended Applications

The LEO LDW-6-35-750E can be used for:

  • Domestic water supply from deep wells
  • Residential water transfer
  • Borehole water pumping
  • Agricultural water supply
  • Small-scale irrigation systems
  • Farm water distribution
  • Water storage tank filling
  • Rural water-supply systems
  • Clean-water transfer from wells and underground water sources

The LDW series is specifically described as being intended for pumping clean water from wells and wells/boreholes for domestic-sector applications.

Important Installation Considerations

For reliable operation, the pump should be installed completely submerged and positioned according to the manufacturer's required minimum water level and installation instructions. The borehole should provide sufficient clearance around the pump, and the discharge pipe should be appropriately sized to minimise excessive friction losses.

The total pumping requirement should be calculated using static head + drawdown + required delivery pressure + pipe/fitting losses. Selecting a pump solely according to the well depth can result in inadequate pressure or flow.

The pump is intended for clean water. Water containing excessive sand, abrasive particles, mud or other solids can accelerate wear and affect pump performance.

SEO Product Description

LEO LDW-6-35-750E Intelligent Deep Well Pump 1HP 0.75kW is a high-performance submersible borehole pump designed for reliable clean-water supply from deep wells and underground water sources. Featuring a 0.75 kW / 1 HP motor, 35 m nominal head and 6 m³/h flow class, this LEO intelligent deep well pump provides efficient water pumping for domestic, agricultural and rural applications. The LDW-E intelligent system provides automatic start/stop operation together with dry-run protection for improved convenience and operational safety. Its stainless-steel construction is well suited to submerged installation in boreholes and deep wells.

Short Product Description

LEO LDW-6-35-750E 1HP Intelligent Deep Well Pump is a 0.75 kW submersible borehole pump designed for clean-water supply from deep wells. With a 35 m head class, 6 m³/h flow class, automatic start/stop functionality and dry-run protection, it is suitable for domestic water supply, farms, irrigation and water-tank filling applications.



 Inquiry - LEO INTELLIGENT DEEP WELL PUMPS - LDW-6-35-750E