B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO SEWAGE SUBMERSIBLE PUMPS - XSP 8-7/0.18I



The LEO XSP 8-7/0.18I is a compact 0.25 HP / 180 W sewage and wastewater submersible pump designed for drainage of wastewater, sewage, accumulated water and other liquids containing suspended particles. It is suitable for residential, commercial, construction, municipal and agricultural drainage applications.

According to LEO's published XSP technical data, the model has a maximum flow of 133 L/min, maximum head of 7 m, 1¼-inch outlet and maximum particle size of 15 mm. It operates from a 220 V / 50 Hz single-phase supply.

Product Specifications

Specification Details
Brand LEO
Model XSP 8-7/0.18I
Pump Type Sewage Submersible Pump
Application Wastewater / Sewage Drainage
Motor Power 0.18 kW / 180 W
Motor Rating 0.25 HP
Voltage 220 V
Frequency 50 Hz
Phase Single Phase
Maximum Flow 133 L/min
Maximum Flow 7.98 m³/h
Maximum Head 7 m
Maximum Particle Size 15 mm
Outlet Diameter 1¼" / 32 mm
Maximum Immersion Depth 5 m
Maximum Liquid Temperature 40°C
Permitted Liquid pH 4–10
Maximum Liquid Density 1.2 × 10³ kg/m³
Protection Class IP68
Insulation Class B
Motor Winding Copper
Shaft Stainless Steel Welded Shaft
Thermal Protection Built-in
Mechanical Seal Carbon / Ceramic
Pump Dimensions Approx. 166 × 121 × 335 mm
Nominal Discharge 1¼"
Installation Fully Submersible

LEO's official XSP data lists the XSP8-7/0.18i with 0.18 kW power, 220 V/50 Hz supply, 133 L/min maximum flow, 7 m maximum head and 15 mm maximum particle size. The published dimensional table gives a 1¼-inch DN connection and 166 × 121 × 335 mm dimensions.

Compact Sewage Pump Design

The XSP 8-7/0.18I is designed for applications where wastewater needs to be removed from a relatively shallow collection area. Unlike a conventional surface-mounted pump, the complete pump assembly is installed directly into the wastewater.

Submersible installation provides several practical advantages: the pump receives liquid directly at the suction inlet, eliminates the need for conventional priming arrangements and allows the pump to operate in confined drainage pits, tanks and sumps.

Flow and Head Performance

The pump provides a maximum flow rate of 133 L/min, equivalent to approximately 7.98 m³/h, with a maximum head of 7 m.

The 133 L/min figure represents the maximum flow under favourable hydraulic conditions. It should not be interpreted as the flow available at the full 7 m head. Actual flow depends on:

  • Vertical lifting height
  • Discharge-pipe diameter
  • Pipe length
  • Number of elbows and fittings
  • Hose restrictions
  • Back pressure
  • Wastewater characteristics
  • Pump installation conditions

For drainage installations, the total dynamic head should therefore be considered when selecting the pump and discharge pipe.

15 mm Solids Handling Capacity

One of the important characteristics of the XSP series is its ability to handle wastewater containing suspended particles. The manufacturer specifies a maximum particle size of 15 mm for the XSP8-7/0.18i.

This makes the pump more appropriate for wastewater and drainage duties than a standard clean-water centrifugal pump.

However, the pump should not be treated as a heavy-duty solids grinder. Large solid objects, ropes, fibrous materials and highly abrasive materials can cause blockage or accelerate wear. A suitable strainer or collection arrangement may be appropriate for installations where large debris is present.

Motor and Electrical Protection

The pump uses a copper motor winding and incorporates a built-in thermal protector. LEO specifies Class B insulation and IP68 protection for the XSP motor.

IP68 protection is particularly appropriate for a submersible pump because the motor is designed to operate while immersed in liquid.

The thermal protector helps protect the motor against excessive temperature caused by abnormal operating conditions, overload or insufficient cooling.

Stainless-Steel Shaft

The XSP series uses a stainless-steel welded shaft, providing improved resistance to corrosion in wastewater service. LEO's material information also identifies stainless steel for various fasteners and components, while the mechanical seal is specified as carbon/ceramic with an NBR O-ring.

The combination is intended to provide reliable operation in general wastewater and drainage applications.

Maximum Immersion Depth

The published XSP operating conditions specify a maximum immersion depth of 5 metres and a maximum liquid temperature of 40°C. The permissible liquid pH range is 4–10.

These limits are important during installation. The pump should not be operated outside the manufacturer's specified immersion depth, temperature or liquid compatibility range.

Automatic Operation

Local Malaysian product listings for the XSP8-7/0.18I equivalent LEO LSWM25A identify automatic start/stop operation using a float switch.

A float-controlled arrangement is useful in drainage pits and tanks because the pump can start when the wastewater level rises and stop when the level falls, reducing the need for manual operation.

Recommended Applications

The LEO XSP 8-7/0.18I is suitable for:

  • Wastewater drainage
  • Sewage drainage
  • Drainage pits
  • Sump drainage
  • Septic tank drainage
  • Construction-site water removal
  • Factory wastewater drainage
  • Commercial facility drainage
  • Residential drainage stations
  • Municipal drainage applications
  • Sewage treatment plant drainage
  • Accumulated-water removal
  • Farm drainage
  • Methane-pool drainage
  • Field irrigation applications

LEO specifically lists factory, construction-site and commercial wastewater drainage, municipal sewage-treatment drainage systems, residential drainage stations, municipal projects, methane pools and countryside field irrigation among the XSP series applications.

Typical Installation

The pump is installed vertically or in the appropriate submerged position inside a sump, drainage pit, tank or other collection area.

A typical installation consists of:

Wastewater collection pit → LEO XSP 8-7/0.18I → 1¼" discharge pipe/hose → drainage point

The discharge line should be sized appropriately for the required flow. Excessively small hoses or long discharge runs can create high friction losses and significantly reduce actual pump performance.

The pump should remain adequately submerged during operation and should not be allowed to run dry.

Main Advantages

  1. Compact 0.25 HP design – suitable for small wastewater and drainage systems.
  2. 180 W motor – relatively low electrical power consumption.
  3. 133 L/min maximum flow – suitable for rapid drainage of small pits and tanks.
  4. 7 m maximum head – suitable for relatively shallow lifting applications.
  5. 15 mm solids handling – allows pumping of wastewater containing small suspended solids.
  6. IP68 protection – designed for submerged operation.
  7. Built-in thermal protection – helps protect the motor from overheating.
  8. Copper winding – provides reliable motor performance.
  9. Stainless-steel shaft – improved corrosion resistance.
  10. 1¼-inch discharge – practical connection size for small drainage systems.
  11. 5 m maximum immersion depth – suitable for many sump and drainage installations.
  12. 40°C maximum liquid temperature – suitable for normal wastewater drainage conditions.
  13. Automatic float-switch operation can be used for automatic level-controlled drainage.

Product Details Summary

LEO XSP 8-7/0.18I is a 0.25 HP / 180 W single-phase sewage submersible pump designed for wastewater drainage and small-scale sewage applications. It delivers up to 133 L/min (7.98 m³/h) with a maximum head of 7 metres and can handle particles up to 15 mm. The pump features IP68 protection, copper winding, built-in thermal protection, a stainless-steel shaft and a 1¼-inch discharge connection. With a maximum immersion depth of 5 m and maximum liquid temperature of 40°C, it is suitable for drainage pits, residential sewage systems, construction sites, commercial facilities, municipal drainage and agricultural applications.

SEO Product Title

LEO XSP 8-7/0.18I Sewage Submersible Pump 0.25HP 180W – 133L/min, 7M Head

SEO Product Description

LEO XSP 8-7/0.18I Sewage Submersible Pump is a compact and reliable 0.25HP / 180W wastewater drainage pump designed for sewage, wastewater and accumulated-water removal. With a maximum flow of 133 L/min (7.98 m³/h) and maximum head of 7 metres, this single-phase 220V pump is suitable for residential, commercial, construction, municipal and agricultural drainage applications. It features 15 mm solids-handling capability, IP68 protection, copper motor winding, built-in thermal protection and a stainless-steel welded shaft. The 1¼-inch discharge connection and compact submersible design make it suitable for drainage pits, sewage tanks, sump pits and wastewater collection systems.



 Inquiry - LEO SEWAGE SUBMERSIBLE PUMPS - XSP 8-7/0.18I