B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO SEWAGE SUBMERSIBLE PUMPS - LSWM 30XA



The LEO LSWM 30XA is an automatic 0.25 kW / approximately 0.33 HP single-phase sewage submersible pump designed for pumping wastewater, sewage, dirty water and liquids containing small suspended solids. It is a compact solution for residential drainage, sewage pits, septic tanks, commercial premises, construction sites and general wastewater transfer.

The current LEO LSWm technical data identifies the LSWm30XA at 0.25 kW, 220 V/50 Hz, 40 mm outlet, 10 m³/h maximum flow, 7.5 m maximum head and 15 mm maximum particle size.

Malaysian listings for the LSWM30XA identify it as a 250 W / 0.33 HP model, with a 1¼-inch outlet and automatic float-switch operation. Some local listings report a maximum flow of 150–167 L/min, while the current LEO technical sheet gives 10 m³/h (approximately 167 L/min).

Product Specifications

Specification Details
Brand LEO
Model LSWM 30XA
Pump Type Automatic Sewage Submersible Pump
Series LSWm
Motor Power 0.25 kW
Motor Rating Approx. 0.33 HP
Voltage 220 V
Frequency 50 Hz
Phase Single Phase
Maximum Flow 10 m³/h
Maximum Flow Approx. 167 L/min
Maximum Head 7.5 m
Outlet Size 40 mm / 1¼"
Maximum Particle Size 15 mm
Maximum Immersion Depth 5 m*
Maximum Liquid Temperature 40°C
Liquid pH Range Approx. 4–10*
Motor Winding Copper
Shaft Material AISI 304 Stainless Steel
Pump Body AISI 304 Stainless Steel
Handle AISI 304 Stainless Steel
Thermal Protection Built-In
Insulation Class F
Protection Class IPX8
Operation Automatic
Level Control Float Switch
Installation Fully Submersible

*Operating limits shown are based on the LEO LSW series documentation; verify the exact supplied unit's nameplate/datasheet for final technical specification. LEO's published LSW documentation specifies Class F insulation and IPX8 protection.

0.25 kW / 0.33 HP Motor

The LSWM30XA uses a compact 0.25 kW motor, marketed locally as approximately 0.33 HP. It operates from a 220 V / 50 Hz single-phase supply, making it suitable for ordinary residential and light commercial electrical installations.

The motor is equipped with a built-in thermal protector, which helps protect the winding from excessive temperature during overload or abnormal operating conditions. Local specifications also identify Class F insulation.

The pump should nevertheless be connected to an appropriately protected electrical circuit.

10 m³/h Maximum Flow

LEO's current technical sheet gives the LSWm30XA a maximum flow of 10 m³/h, equivalent to approximately 167 L/min.

This makes it suitable for relatively small to medium wastewater drainage applications where rapid removal of accumulated water is required.

Typical applications include:

  • Sewage collection pits
  • Septic tanks
  • Drainage sumps
  • Basement drainage
  • Wastewater tanks
  • Residential drainage
  • Small commercial drainage
  • Construction-site drainage

The maximum-flow figure represents the upper end of the pump's hydraulic capability. Actual flow decreases as total head and pipe resistance increase.

7.5-Metre Maximum Head

The LSWM30XA is specified with a maximum head of 7.5 metres.

This makes the pump suitable for relatively low-head wastewater transfer, including:

  • Sump pits
  • Sewage tanks
  • Basement drainage
  • Septic systems
  • Small drainage stations
  • Short discharge pipelines

The maximum head should not be interpreted as the head at maximum flow. Pump performance must be evaluated according to the required operating point.

For proper selection:

Total Dynamic Head = Static Lift + Pipe Friction Loss + Fitting Losses + Discharge Pressure

This calculation is particularly important when using long discharge hoses or pipes.

40 mm / 1¼-Inch Discharge

The LEO technical data specifies a 40 mm outlet, while Malaysian product listings identify the connection as approximately 1¼ inches.

The discharge size is appropriate for the pump's compact design and flow capacity.

For best performance, avoid reducing the discharge pipe unnecessarily. A smaller-than-required pipe can increase friction losses and reduce the actual flow rate.

15 mm Particle Handling

The LSWm30XA is designed for wastewater containing small suspended solids and is specified for a maximum particle diameter of 15 mm.

This is an important advantage over ordinary clean-water submersible pumps.

The pump is suitable for dirty water and sewage containing small particles, but it should not be regarded as a grinder pump. Large objects, ropes, cloth, plastic bags, long fibres and excessive debris can still cause clogging.

Where significant solid waste is present, suitable screening should be considered before the pump inlet.

Automatic Float-Switch Operation

The XA configuration is designed for automatic operation using a float switch. LEO's technical documentation identifies automatic operation with a float switch for the LSW series.

The normal operating sequence is:

Water level rises → Float activates → Pump starts → Water level falls → Float deactivates → Pump stops

This makes the LSWM30XA particularly useful for drainage pits and sewage tanks where continuous manual switching is impractical.

The float should be positioned so that it can move freely and should not become trapped against the pit wall, pipework or other equipment.

Stainless-Steel Construction

The LSWM30XA is specified locally with an AISI 304 fabricated shaft, handle and pump body.

AISI 304 stainless steel provides useful corrosion resistance in wet environments and is well suited to regular contact with wastewater.

The stainless-steel shaft also contributes to durability in a submerged operating environment.

Built-In Thermal Protection

The pump incorporates a built-in thermal protector. This provides protection against excessive motor temperature caused by conditions such as overload or abnormal operation.

Thermal protection should be regarded as an additional motor-protection feature, not a substitute for correctly sized electrical protection.

IPX8 Submersible Protection

LEO's current technical documentation specifies IPX8 protection for the LSW range.

This is appropriate for a pump designed to operate fully submerged.

The electrical installation should still be carried out correctly, particularly with respect to cable routing, connections, circuit protection and grounding.

Operating Conditions

The LSW series is designed for wastewater and sewage applications within defined operating limits. The published technical information includes:

  • Maximum liquid temperature: 40°C
  • Maximum particle size: 15 mm for LSWm30XA
  • Protection class: IPX8
  • Insulation class: F
  • Power supply: 220 V / 50 Hz
  • Single-phase motor
  • Maximum head: 7.5 m
  • Maximum flow: 10 m³/h

The pump should not be used with liquids outside the specified chemical, temperature and solids-handling limits without confirming compatibility.

Suitable Applications

LEO identifies its sewage submersible pumps for wastewater drainage, sewage pumping and general industrial pumping. Applications include wastewater tanks, sewage tanks, septic systems, commercial buildings, factories and agricultural facilities.

The LSWM30XA is particularly suitable for:

Residential Applications

  • Septic tank drainage
  • Sewage pits
  • Basement drainage
  • Household wastewater
  • Small drainage sumps

Commercial Applications

  • Shop and commercial-building drainage
  • Wastewater collection tanks
  • Small facility drainage
  • Restaurant wastewater drainage

Construction Applications

  • Construction-site drainage
  • Excavation drainage
  • Temporary wastewater removal

Industrial Applications

  • Light industrial wastewater
  • Factory drainage
  • Wastewater collection pits

Agricultural Applications

  • Farm wastewater
  • Small drainage systems
  • Agricultural wastewater transfer

Typical Installation

A typical installation is:

Sewage / wastewater pit → LEO LSWM30XA → 1¼" discharge pipe → drainage / collection / treatment point

The pump is installed inside the collection pit and operates while submerged.

The float switch provides automatic start/stop control according to the water level.

For permanent installations, a suitable non-return valve may be used to minimise backflow through the discharge line after the pump stops.

Pump Performance Considerations

The 10 m³/h maximum flow and 7.5 m maximum head are maximum specifications and should not be assumed to occur simultaneously.

Actual performance depends on:

  1. Vertical lifting height.
  2. Discharge pipe diameter.
  3. Discharge-pipe length.
  4. Number of elbows and fittings.
  5. Valves and check valves.
  6. Wastewater characteristics.
  7. Required discharge pressure.

For example, a system with a 5 m vertical lift and a long discharge pipe will experience additional friction losses, leaving less available pump head for useful flow.

The manufacturer's pump curve should therefore be used when selecting the pump for a specific duty point.

Main Product Advantages

  1. 0.25 kW / approximately 0.33 HP motor for compact wastewater systems.
  2. 10 m³/h maximum flow, equivalent to approximately 167 L/min.
  3. 7.5 m maximum head for low-to-moderate lift applications.
  4. 40 mm / 1¼-inch discharge outlet.
  5. 15 mm maximum particle size for wastewater containing small suspended solids.
  6. Automatic float-switch operation.
  7. Built-in thermal protection.
  8. AISI 304 stainless-steel shaft.
  9. AISI 304 stainless-steel pump body and handle.
  10. Class F insulation.
  11. IPX8 submersible protection.
  12. 220 V / 50 Hz single-phase operation.
  13. Suitable for residential, commercial, construction, industrial and agricultural wastewater drainage.
  14. Compact design for sewage pits, septic tanks, drainage sumps and wastewater collection tanks.

Product Details Summary

The LEO LSWM30XA is an automatic 0.25 kW / approximately 0.33 HP sewage submersible pump designed for wastewater, sewage and dirty-water drainage. It operates on 220 V / 50 Hz single-phase power and provides a maximum flow of 10 m³/h (approximately 167 L/min) with a maximum head of 7.5 metres. The pump uses a 40 mm / 1¼-inch discharge outlet and can handle particles up to 15 mm. It features automatic float-switch operation, built-in thermal protection, Class F insulation and AISI 304 stainless-steel fabricated shaft, handle and pump body. With IPX8 submersible protection, the LSWM30XA is suitable for septic tanks, sewage pits, basement drainage, residential wastewater, commercial drainage, construction sites, light industrial wastewater and agricultural drainage applications.

SEO Product Title

LEO LSWM30XA Sewage Submersible Pump 0.33HP 0.25kW – 167L/min, 7.5M Head

SEO Product Description

LEO LSWM30XA Sewage Submersible Pump is an automatic 0.33HP / 0.25kW wastewater and sewage pump designed for reliable drainage of dirty water, sewage and wastewater containing small suspended solids. Operating at 220V/50Hz single phase, it delivers up to 167L/min (10m³/h) with a maximum head of 7.5 metres and features a 40mm / 1¼-inch discharge outlet. The pump can handle particles up to 15mm and incorporates an automatic float switch, built-in thermal protection, Class F insulation and AISI 304 stainless-steel fabricated shaft, handle and pump body. Its IPX8 submersible design makes it suitable for septic tanks, sewage pits, drainage sumps, residential wastewater, commercial facilities, construction sites, industrial drainage and agricultural wastewater applications.



 Inquiry - LEO SEWAGE SUBMERSIBLE PUMPS - LSWM 30XA