The LEO LSWM 75XA is an automatic 0.55 kW / 0.73 HP sewage submersible pump designed for wastewater drainage, sewage pits, drainage stations, construction sites, commercial facilities and municipal wastewater applications. It uses a semi-open impeller, making it suitable for pumping wastewater containing suspended impurities. The Malaysian specification lists 220 V single-phase operation, 283 L/min maximum flow, 8.5 m maximum head and a 2-inch discharge outlet.
LEO's broader sewage-pump documentation describes the LSW series as suitable for wastewater drainage, sewage pumping and industrial applications, with Class F insulation, IPX8 protection and stainless-steel welded shaft construction.
Product Specifications
| Specification | Details |
|---|---|
| Brand | LEO |
| Model | LSWM 75XA |
| Pump Type | Automatic Sewage Submersible Pump |
| Impeller Type | Semi-Open Impeller |
| Motor Power | 0.55 kW |
| Motor Rating | 0.73 HP |
| Voltage | 220 V |
| Frequency | 50 Hz |
| Phase | Single Phase |
| Maximum Flow | 283 L/min |
| Maximum Flow | Approx. 17.0 m³/h |
| Maximum Head | 8.5 m |
| Outlet Size | 2" |
| Operation | Automatic |
| Level Control | Float Switch |
| Shaft Material | AISI 304 Stainless Steel |
| Pump Body | AISI 304 Stainless Steel |
| Handle | AISI 304 Stainless Steel |
| Thermal Protection | Built-In |
| Insulation Class | F |
| Protection Class | IPX8 |
| Installation | Fully Submersible |
The Malaysian LEO distributor specification confirms 0.55 kW / 0.73 HP, 220 V, 283 L/min maximum flow, 8.5 m maximum head and 2-inch outlet. It also identifies the AISI 304 fabricated shaft, handle and pump body, built-in thermal protection, automatic float-switch operation and Class F insulation.
0.55 kW / 0.73 HP Motor
The LSWM75XA is powered by a 0.55 kW motor, equivalent to approximately 0.73 HP. It operates on a 220 V single-phase supply, making it suitable for many residential, commercial and light-industrial installations.
The motor incorporates a built-in thermal protector to help prevent overheating during abnormal operating conditions. The LSW series uses Class F insulation, providing suitable thermal resistance for a submersible wastewater pump.
283 L/min Maximum Flow
The LSWM75XA has a published maximum flow of 283 L/min, equivalent to approximately 17.0 m³/h.
This relatively high flow capacity makes the pump suitable for quickly removing wastewater from:
- Sewage collection pits
- Drainage tanks
- Construction sites
- Commercial facilities
- Municipal drainage stations
- Residential drainage systems
- Agricultural wastewater systems
The 283 L/min figure represents maximum hydraulic capacity. Actual flow will decrease as the total discharge head and pipe resistance increase.
8.5-Metre Maximum Head
The maximum head of the LSWM75XA is 8.5 metres.
This makes the pump suitable for low-to-moderate lifting applications such as:
- Basement drainage
- Sewage collection pits
- Drainage sumps
- Wastewater tanks
- Septic systems
- Short-to-medium discharge pipelines
For accurate pump selection, the required system head should be calculated rather than relying only on the maximum-head specification.
Total Dynamic Head = Static Lift + Pipe Friction Loss + Fitting Losses + Discharge Pressure
2-Inch Discharge Outlet
The LSWM75XA is equipped with a 2-inch discharge outlet, matching its higher flow capacity.
The larger outlet allows the pump to discharge wastewater efficiently while reducing unnecessary friction losses compared with a substantially smaller discharge line.
For optimum performance, the discharge pipe should be correctly sized and should avoid unnecessary restrictions, sharp bends and undersized hoses.
Semi-Open Impeller
The “X” designation identifies the semi-open impeller configuration. The LSWM75XA is specifically listed by the Malaysian distributor as an X = semi-open impeller model.
A semi-open impeller provides better tolerance for wastewater containing suspended impurities than a conventional clean-water impeller.
This design is useful for:
- Dirty water
- Wastewater
- Sewage
- Suspended solids
- Small debris-containing liquids
The pump should nevertheless not be treated as a grinder pump. Large solid objects, ropes, cloth, plastic bags and excessive fibrous material can still cause clogging.
Automatic Float-Switch Operation
The LSWM75XA is an automatic model equipped with a float switch. The float controls the pump according to the wastewater level.
The typical operating sequence is:
Water level rises → Float activates → Pump starts → Water level falls → Float deactivates → Pump stops
This eliminates the need for constant manual switching and makes the pump particularly suitable for drainage pits and sewage collection tanks.
The float should have sufficient clearance to move freely and should not be trapped against the tank wall, discharge pipe or other equipment.
AISI 304 Stainless-Steel Construction
The LSWM75XA specification identifies AISI 304 stainless steel for the fabricated shaft, handle and pump body.
This construction provides improved corrosion resistance in wet and wastewater environments and is appropriate for a pump that is repeatedly or continuously submerged.
LEO's general sewage-pump documentation also specifies a stainless-steel welded shaft for its sewage-pump range.
Built-In Thermal Protection
The pump includes a built-in thermal protector. This helps protect the motor against excessive temperature caused by overload or abnormal operating conditions.
Additional electrical protection should still be provided as required by the installation. Thermal protection does not compensate for incorrect pump sizing, blocked discharge lines or unsuitable operating conditions.
IPX8 Submersible Protection
LEO specifies IPX8 protection for its LSW sewage-pump range.
This is appropriate for a pump designed to operate fully submerged in wastewater.
The pump should be installed according to the manufacturer's instructions, with particular attention to electrical connections, grounding, cable routing and maximum immersion conditions.
Sewage and Wastewater Applications
LEO identifies its sewage submersible pumps for wastewater drainage, sewage pumping and general industrial pumping. The applications include wastewater tanks, sewage tanks, factories, commercial facilities, residential drainage stations and municipal sewage-treatment systems.
The LSWM75XA is particularly suitable for:
Residential
- Sewage collection pits
- Septic tanks
- Residential drainage stations
- Basement wastewater
Commercial
- Commercial building drainage
- Restaurant wastewater
- Facility drainage
- Wastewater collection tanks
Industrial
- Factory wastewater
- Industrial drainage pits
- Wastewater transfer systems
Construction
- Construction-site drainage
- Excavation drainage
- Temporary wastewater removal
Municipal
- Sewage-treatment plant drainage
- Municipal drainage stations
- Wastewater collection systems
Agricultural
- Farm wastewater
- Methane pools
- Field irrigation
- Agricultural drainage
These applications correspond closely with LEO's published application information for the LSW/SW sewage-pump ranges.
Operating Conditions
LEO's sewage-pump documentation specifies the following general operating conditions:
- Frequency: 50 Hz
- Insulation: Class F
- Protection: IPX8
- Maximum liquid temperature: 40°C
- Liquid pH: 4–10
- Maximum liquid density: 1200 kg/m³
- Solid impurity volume ratio: maximum 2%
The pump should not be used for strongly corrosive liquids or liquids containing excessive abrasive material unless compatibility has been confirmed.
Typical Installation
A typical system can be arranged as:
Sewage / wastewater collection pit → LEO LSWM75XA → 2" discharge pipe → drainage / treatment / collection point
The pump is positioned inside the collection pit and operates while submerged.
For permanent systems, a non-return/check valve can be installed where appropriate to reduce reverse flow when the pump stops.
The discharge pipe should be properly supported and sized for the required flow. Excessively long or undersized piping can significantly reduce the actual pumping capacity.
Pump Performance Considerations
The 283 L/min maximum flow and 8.5 m maximum head are maximum specifications and should not be considered simultaneous operating conditions.
Actual performance depends on:
- Static lifting height.
- Discharge pipe diameter.
- Total discharge-pipe length.
- Number of elbows and fittings.
- Check valves and other restrictions.
- Wastewater characteristics.
- Required discharge pressure.
For a high-flow installation, calculate the complete system resistance and select the pump according to its Q-H performance curve.
Main Product Advantages
- 0.55 kW / 0.73 HP motor for medium-capacity wastewater drainage.
- 283 L/min maximum flow for rapid wastewater removal.
- 17 m³/h maximum flow class.
- 8.5 m maximum head for moderate lifting requirements.
- 2-inch discharge outlet for high-volume drainage.
- Semi-open impeller for wastewater containing suspended impurities.
- Automatic float-switch operation.
- Built-in thermal protection.
- AISI 304 stainless-steel shaft, handle and pump body.
- Class F insulation.
- IPX8 protection for submerged operation.
- 220 V single-phase operation.
- Suitable for residential, commercial, industrial, construction, municipal and agricultural wastewater applications.
Product Details Summary
The LEO LSWM75XA is an automatic 0.73 HP / 0.55 kW sewage submersible pump designed for wastewater, sewage and dirty-water drainage. Operating on 220 V single phase, it delivers a maximum flow of 283 L/min (approximately 17 m³/h) with a maximum head of 8.5 metres through a 2-inch discharge outlet. Its semi-open impeller is designed for wastewater containing suspended impurities, while the pump incorporates automatic float-switch operation, built-in thermal protection, Class F insulation and AISI 304 stainless-steel fabricated shaft, handle and pump body. With IPX8 submersible protection, the LSWM75XA is suitable for sewage pits, septic tanks, construction-site drainage, factories, commercial facilities, municipal sewage-treatment systems, residential drainage stations and agricultural wastewater applications.
SEO Product Title
LEO LSWM75XA Sewage Submersible Pump 0.73HP 0.55kW – 283L/min, 8.5M Head
SEO Product Description
LEO LSWM75XA Sewage Submersible Pump is an automatic 0.73HP / 0.55kW wastewater and sewage pump designed for efficient drainage of dirty water, sewage and wastewater containing suspended impurities. Operating at 220V/50Hz single phase, it delivers up to 283L/min (17m³/h) with a maximum head of 8.5 metres and features a 2-inch discharge outlet. The pump uses a semi-open impeller and incorporates automatic float-switch operation, built-in thermal protection, Class F insulation and AISI 304 stainless-steel fabricated shaft, handle and pump body. Its IPX8 submersible design makes it suitable for septic tanks, sewage pits, residential drainage stations, construction sites, factories, commercial facilities, municipal wastewater systems and agricultural drainage applications.
Inquiry - LEO SEWAGE SUBMERSIBLE PUMPS - LSWM 75XA