The LEO QDX 1.5-15-0.37LA is a compact 0.5 HP / 0.37 kW single-phase submersible drainage pump designed for transferring clean water and lightly contaminated water from wells, pits, tanks, construction sites, agricultural areas and drainage systems. The LA version features a cast-iron pump body, aluminium motor casing, double-end mechanical seal and stainless-steel shaft. LEO's QDX-LA documentation specifies a 1-inch outlet, 25–120 L/min flow range, 15.6–3.9 m head range and 5 m maximum immersion depth.
Although some Malaysian listings categorize the product under "sewage pumps," this model is more accurately described as a submersible drainage / dirty-water pump rather than a heavy-duty sewage cutter pump. Its published suspended-solids passage is only up to 0.2 mm, so it is not intended for large sewage solids, rags or fibrous waste.
Product Specifications
| Specification | Details |
|---|---|
| Brand | LEO |
| Model | QDX 1.5-15-0.37LA |
| Pump Type | Submersible Drainage / Dirty-Water Pump |
| Series | QDX-LA |
| Motor Power | 0.37 kW |
| Motor Rating | 0.5 HP |
| Voltage | 220 V |
| Frequency | 50 Hz |
| Phase | Single Phase |
| Maximum Flow | 120 L/min |
| Flow Range | 25–120 L/min* |
| Maximum Head | Approx. 15.6–17 m* |
| Head Range | 15.6–3.9 m* |
| Discharge Outlet | 1" / 25 mm |
| Maximum Immersion Depth | 5 m |
| Maximum Liquid Temperature | 40°C |
| Permitted Liquid pH | 6.5–8 |
| Maximum Sand Content | 0.1% |
| Suspended-Solid Passage | Up to 0.2 mm |
| Motor Casing | Aluminium |
| Pump Body | Cast Iron with Anti-Rust Treatment |
| Shaft | Stainless Steel |
| Mechanical Seal | Double-End Mechanical Seal |
| Motor Winding | Copper |
| Thermal Protection | Built-In |
| Insulation Class | F |
| Protection Class | IP68 |
| Typical Applications | Drainage, irrigation, wells, construction water, aquaculture |
*LEO's QDX-LA catalogue gives 25–120 L/min and 15.6–3.9 m head, while a Malaysian listing gives 8.5–100 L/min and 17–8.8 m head. For a website catalogue, it is safer to state the manufacturer's QDX-LA catalogue figures unless the exact regional nameplate specifies otherwise.
0.5 HP / 0.37 kW Motor
The QDX 1.5-15-0.37LA is powered by a 0.37 kW / 0.5 HP single-phase motor operating at 220 V / 50 Hz.
Its compact motor size makes the pump suitable for smaller drainage applications where a larger sewage pump would be unnecessary.
Typical applications include removing accumulated water from:
- Small drainage pits
- Water tanks
- Construction areas
- Agricultural areas
- Wells
- Aquaculture installations
- Basements
- Small flooded areas
120 L/min Maximum Flow
The QDX-LA technical catalogue specifies a maximum flow of 120 L/min, equivalent to approximately 7.2 m³/h. The catalogue performance range is 25–120 L/min.
The actual flow depends on the discharge head. At higher lifting heights, the available flow decreases.
This makes the pump suitable for relatively small-volume drainage and water-transfer applications rather than high-volume municipal sewage pumping.
Maximum Head
The LEO QDX-LA catalogue lists the QDX 1.5-15-0.37LA with a head range of approximately 15.6 m down to 3.9 m across its operating flow range.
A Malaysian listing gives the model as 17–8.8 m head, demonstrating that regional specifications may differ slightly.
For product listing purposes, the manufacturer's QDX-LA catalogue value of approximately 15.6 m maximum head is preferable unless the local unit's nameplate specifies another figure.
1-Inch Discharge Outlet
The pump uses a compact 1-inch / 25 mm discharge outlet.
The 1-inch outlet is appropriate for the pump's relatively modest flow capacity.
When installing the pump, avoid unnecessarily long or undersized discharge hoses because excessive friction losses can significantly reduce the delivered flow.
Cast-Iron Pump Body
The QDX-LA version features a cast-iron pump body with anti-rust treatment.
This construction provides good mechanical strength and durability for drainage applications.
The anti-rust treatment is particularly useful because the pump operates submerged and is routinely exposed to water.
Aluminium Motor Casing
The QDX-LA version uses an aluminium motor casing.
Aluminium provides a lightweight motor housing while offering good heat-transfer characteristics.
This makes the QDX-LA configuration relatively compact and practical for portable drainage applications.
Stainless-Steel Shaft
The pump is equipped with a stainless-steel shaft.
The shaft provides corrosion resistance and mechanical durability for the rotating pump assembly.
This is particularly useful in a submersible application where the shaft is continuously exposed to the pumped liquid.
Double-End Mechanical Seal
The QDX-LA series incorporates a double-end mechanical seal.
The mechanical seal provides a barrier between the pumped liquid and the motor section, helping prevent water from entering the motor through the rotating shaft.
For a submersible pump, effective shaft sealing is critical to motor reliability and service life.
Built-In Thermal Protection
The QDX-LA motor incorporates a built-in thermal protector.
The thermal protector helps protect the motor against excessive temperature resulting from overload or abnormal operating conditions.
It should not be regarded as a replacement for correctly rated electrical circuit protection.
Class F Insulation
The motor uses Class F insulation according to LEO's QDX-LA specifications.
Class F insulation provides suitable thermal resistance for the motor winding system.
IP68 Protection
The QDX-LA has an IP68 protection rating, making it suitable for submerged operation.
This is an important feature for applications involving:
- Drainage pits
- Wells
- Water tanks
- Construction-site water
- Flooded areas
- Agricultural water
The maximum specified immersion depth remains 5 m, so IP68 does not mean the pump can be installed at unlimited depth.
Maximum Immersion Depth: 5 m
The QDX 1.5-15-0.37LA is specified for a maximum immersion depth of 5 metres.
The pump should be positioned securely and should not be operated beyond the manufacturer's immersion limit.
When used in a pit or tank, the pump should also be positioned so that excessive sediment and abrasive material are not continuously drawn into the hydraulic section.
Water Quality and Solid Passage
The QDX-LA is designed for clean water and lightly contaminated water, rather than raw sewage containing large solids.
LEO specifies:
- pH: 6.5–8
- Maximum sand content: 0.1%
- Suspended solids passage: up to 0.2 mm
- Maximum liquid temperature: 40°C
This is an important distinction from the LSWM CA cutter pumps.
The QDX 1.5-15-0.37LA does not have a sewage cutter/shredder system and should not be selected for wastewater containing rags, ropes, large fibrous material or substantial sewage solids.
Maximum Liquid Temperature: 40°C
The published LEO QDX-LA specification allows a maximum liquid temperature of 40°C.
The pump is therefore intended for normal-temperature water and drainage applications.
It is not intended for hot industrial liquids or high-temperature wastewater.
Suitable Applications
LEO identifies the QDX-LA series for small electrical irrigation and drainage equipment, rural well-water pumping, farming irrigation and drainage, industrial/construction accumulated-water drainage and aquaculture.
Suitable applications include:
Agricultural
- Small-scale irrigation
- Farm drainage
- Rural water transfer
- Well-water pumping
Construction
- Construction-site accumulated water
- Excavation drainage
- Foundation drainage
- General site dewatering
Residential
- Basement drainage
- Small water pits
- Tank drainage
- Floodwater removal
Industrial
- Industrial accumulated-water drainage
- Equipment-area drainage
- Small water-transfer applications
Aquaculture
- Pond drainage
- Tank water transfer
- Aquaculture water management
Typical Installation
A typical installation is:
Water source / drainage pit → QDX 1.5-15-0.37LA → 1" discharge hose/pipe → drainage point
The pump is submerged directly in the water and transfers the liquid through the discharge connection.
For portable use, the pump can be placed in the drainage area when required and removed after the water level has been reduced.
Important Selection Note
Despite being included in some retail categories under "sewage submersible pumps," the QDX 1.5-15-0.37LA should technically be treated as a submersible drainage / dirty-water pump. LEO's own QDX-LA documentation describes applications around irrigation, drainage, wells, accumulated water and aquaculture rather than heavy raw-sewage handling.
Its 0.2 mm suspended-solid passage is significantly smaller than the solid-handling capability expected from a dedicated sewage pump.
For sewage containing rags, fibrous material or larger solids, a dedicated LEO sewage pump or cutter pump from the LSWM range would be more appropriate.
Main Product Advantages
- 0.5 HP / 0.37 kW compact motor.
- 220 V single-phase operation.
- Up to 120 L/min flow.
- Approximately 15.6 m maximum head according to the QDX-LA catalogue.
- 1-inch discharge outlet.
- Cast-iron pump body with anti-rust treatment.
- Aluminium motor casing.
- Stainless-steel shaft.
- Double-end mechanical seal.
- Built-in thermal protection.
- Class F insulation.
- IP68 protection.
- 5 m maximum immersion depth.
- Handles liquid up to 40°C.
- Suitable for water with pH 6.5–8.
- Maximum sand content of 0.1%.
- Suspended-solid passage up to 0.2 mm.
- Suitable for irrigation, drainage, wells, construction dewatering and aquaculture.
Product Details Summary
The LEO QDX 1.5-15-0.37LA is a compact 0.5 HP / 0.37 kW single-phase submersible drainage pump designed for transferring clean and lightly contaminated water. Operating at 220 V / 50 Hz, it provides up to 120 L/min with a maximum head of approximately 15.6 m and uses a 1-inch discharge outlet. The LA construction features a cast-iron pump body with anti-rust treatment, aluminium motor casing, stainless-steel shaft and double-end mechanical seal. The pump also incorporates built-in thermal protection, Class F insulation and IP68 protection, with a maximum immersion depth of 5 m and maximum liquid temperature of 40°C. It is suitable for small irrigation systems, rural wells, agricultural drainage, construction-site accumulated water, aquaculture and general water drainage. Because its permitted suspended-solid passage is only 0.2 mm, it is better suited to drainage and lightly contaminated water than raw sewage containing large solids or fibrous waste.
SEO Product Title
LEO QDX 1.5-15-0.37LA Submersible Drainage Pump 0.5HP 0.37kW – 120L/min, 15.6M Head
SEO Product Description
LEO QDX 1.5-15-0.37LA Submersible Drainage Pump is a compact 0.5HP / 0.37kW, 220V single-phase submersible pump designed for clean and lightly contaminated water drainage, irrigation, rural well-water pumping, construction-site dewatering and aquaculture applications. The pump provides up to 120L/min flow with a maximum head of approximately 15.6 metres through a 1-inch discharge outlet. It features a durable cast-iron pump body with anti-rust treatment, aluminium motor casing, stainless-steel shaft and double-end mechanical seal, together with built-in thermal protection, Class F insulation and IP68 protection. With a maximum immersion depth of 5 metres, maximum liquid temperature of 40°C, and suspended-solid passage up to 0.2mm, the LEO QDX 1.5-15-0.37LA is ideal for agricultural drainage, small irrigation systems, rural wells, construction water removal, tanks and general water-transfer applications.
Inquiry - LEO SEWAGE SUBMERSIBLE PUMPS - QDX 1.5-15-0.37LA