B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO SEWAGE SUBMERSIBLE PUMPS - QDX 3-18-0.55LA



The LEO QDX 3-18-0.55LA is a 0.55 kW / approximately 0.73 HP single-phase submersible drainage pump designed for water transfer, irrigation, drainage, rural well-water pumping, construction dewatering and aquaculture. LEO's QDX-LA technical documentation specifies 220 V, 25–200 L/min flow, 19.2–3.7 m head, 5 m maximum immersion depth and a 25 mm outlet.

This model is sometimes sold under sewage/drainage categories, but technically it is better described as a submersible drainage pump for clean or lightly contaminated water, rather than a heavy-duty raw-sewage pump. Its published solids passage is only up to 0.2 mm, so it is not intended for large solids, rags or fibrous sewage.

Product Specifications

Specification Details
Brand LEO
Model QDX 3-18-0.55LA
Pump Type Submersible Drainage Pump
Series QDX-LA
Motor Power 0.55 kW
Motor Rating Approx. 0.73 HP
Voltage 220 V
Frequency 50 Hz
Phase Single Phase
Maximum Flow 200 L/min
Maximum Flow 12 m³/h
Rated Flow 3 m³/h
Maximum Head 19.2 m
Rated Head 18 m
Head Range 19.2–3.7 m
Discharge Outlet 1" / 25 mm
Maximum Immersion Depth 5 m
Maximum Liquid Temperature 40°C
Permitted Liquid pH 6.5–8
Maximum Sand Content 0.1%
Suspended-Solid Passage Up to 0.2 mm
Pump Body Cast Iron with Anti-Rust Treatment
Motor Casing Aluminium
Shaft Stainless Steel
Mechanical Seal Double-End Mechanical Seal
Motor Winding Copper
Insulation Class F
Protection Class IP68
Thermal Protection Built-In
Typical Applications Drainage, irrigation, wells, construction, aquaculture

The official QDX-LA table lists 0.55 kW / 0.73 HP, 25–200 L/min, 19.2–3.7 m head and 25 mm outlet for this exact model.

0.55 kW / 0.73 HP Motor

The QDX 3-18-0.55LA is equipped with a 0.55 kW motor, commonly rated at approximately 0.73 HP. It operates from a 220 V / 50 Hz single-phase supply.

The motor uses copper winding and incorporates a built-in thermal protector. This combination provides suitable electrical and thermal characteristics for a compact submersible pump.

The motor rating makes this model suitable for applications requiring a useful combination of moderate flow and approximately 18–19 m of lifting capability.

200 L/min Maximum Flow

The QDX 3-18-0.55LA has a published maximum flow of 200 L/min, equivalent to approximately 12 m³/h. The LEO performance data gives a flow range extending from approximately 25 L/min to 200 L/min.

This provides considerably higher water-handling capacity than smaller QDX models such as the QDX 1.5 series.

Suitable applications include:

  • Drainage pits
  • Construction dewatering
  • Irrigation
  • Water tanks
  • Ponds
  • Wells
  • Agricultural drainage
  • Aquaculture
  • General water transfer

The maximum 200 L/min value is a hydraulic maximum and should not be interpreted as the flow available at the maximum head.

19.2-Metre Maximum Head

The published maximum head is approximately 19.2 metres, with the model's rated head identified as 18 m.

The pump is therefore suitable for applications where water needs to be lifted through a moderate vertical height.

Potential applications include:

  • Deep drainage pits
  • Basement drainage
  • Construction excavations
  • Agricultural irrigation
  • Well-water transfer
  • Water tanks
  • Pond drainage

The actual flow decreases as the total system head increases.

Hydraulic Performance

LEO's performance curve for the QDX 3-18-0.55LA gives approximately the following relationship:

Flow Approx. Head
0 m³/h 19.4 m
1 m³/h 19.1 m
2 m³/h 18.6 m
3 m³/h 18.0 m
4 m³/h 17.3 m
5 m³/h 16.3 m
6 m³/h 15.0 m
7 m³/h 13.6 m
8 m³/h 12.0 m
9 m³/h 10.0 m

The published LEO performance data supports these approximate values.

This shows that the pump can maintain relatively high head at lower flow rates, while delivering significantly higher flow when the required discharge head is lower.

Actual site performance will depend on:

  • Vertical lifting height
  • Pipe diameter
  • Pipe length
  • Hose diameter
  • Elbows and fittings
  • Valves
  • Check valves
  • Pipe friction
  • Water characteristics

1-Inch Discharge Outlet

The QDX 3-18-0.55LA uses a 1-inch / 25 mm discharge outlet.

The compact outlet is appropriate for the pump's design and hydraulic characteristics.

For longer discharge runs, correct hose and pipe sizing is important. Excessive restriction in the discharge line can significantly reduce the actual flow.

For high-head applications, the discharge line should be kept as direct as possible, with unnecessary elbows and restrictions avoided.

Cast-Iron Pump Body

The QDX-LA series uses a cast-iron pump body with anti-rust treatment.

The cast-iron construction provides:

  • Mechanical strength
  • Good durability
  • Resistance to impact
  • Stable support for the hydraulic assembly
  • Suitable service life for drainage applications

The anti-rust treatment helps protect the pump body in the wet environment associated with submersible operation.

Aluminium Motor Casing

The LA configuration incorporates an aluminium motor casing.

Aluminium provides a relatively lightweight construction and good heat-transfer properties.

This makes the pump practical for portable drainage applications where the unit may need to be moved between different locations.

Stainless-Steel Shaft

The pump uses a stainless-steel shaft.

Because the shaft operates inside a submerged pump assembly, corrosion resistance is important.

The stainless-steel shaft provides:

  • Corrosion resistance
  • Mechanical strength
  • Reliable rotation
  • Good durability
  • Resistance to the wet operating environment

Double-End Mechanical Seal

The QDX-LA construction uses a double-end mechanical seal.

The mechanical seal forms a barrier between the hydraulic chamber and motor compartment.

This helps prevent pumped liquid from entering the motor through the rotating shaft, which is particularly important in a submersible pump.

Copper Motor Winding

The motor uses copper winding. LEO's QDX documentation specifies copper winding for the motor.

Copper provides good electrical conductivity and appropriate thermal characteristics for the motor winding system.

Built-In Thermal Protection

The QDX 3-18-0.55LA has a built-in thermal protector.

This helps protect the motor against excessive temperature caused by overload or abnormal operating conditions.

Correct electrical installation is still required. A suitable circuit breaker, grounding system and appropriately sized cable should be provided.

Class F Insulation

The QDX-LA series is specified with Class F insulation.

Class F insulation provides appropriate thermal resistance for the motor winding system and supports reliable operation within the manufacturer's specified conditions.

IP68 Protection

The pump has an IP68 protection rating, making it suitable for submerged operation.

This is appropriate for applications such as:

  • Drainage pits
  • Water tanks
  • Wells
  • Construction excavations
  • Flooded areas
  • Agricultural drainage
  • Aquaculture

The IP68 rating does not eliminate the manufacturer's depth limitation. The maximum specified immersion depth remains 5 metres.

Maximum Immersion Depth – 5 m

The maximum immersion depth is 5 metres.

The pump should be securely positioned and operated within this limit.

For drainage applications involving sediment, it is preferable to keep the pump away from heavy deposits of sand or sludge where practical. Excessive abrasive particles can accelerate wear of the mechanical seal and hydraulic components.

Maximum Liquid Temperature – 40°C

The maximum specified liquid temperature is 40°C.

The pump is therefore intended for normal-temperature water and lightly contaminated drainage liquids.

It should not be used for high-temperature industrial liquids without confirmation from the manufacturer.

Water Quality

The QDX-LA specification is intended for liquids within approximately:

  • pH: 6.5–8
  • Maximum sand content: 0.1%
  • Maximum temperature: 40°C
  • Suspended solids: up to 0.2 mm

These limits are important when selecting the pump.

The QDX 3-18-0.55LA does not have a dedicated sewage cutter/shredder system.

Sewage Application Limitation

Although the product may be grouped under sewage submersible pumps by some distributors, the QDX 3-18-0.55LA is more accurately a submersible drainage/water pump.

It is suitable for:

  • Lightly contaminated water
  • Drainage water
  • Pond water
  • Irrigation water
  • Accumulated construction water
  • Rural well water

It is not suitable for heavy raw sewage containing large solids or fibrous material.

Avoid pumping:

  • Rags
  • Rope
  • Plastic waste
  • Large organic solids
  • Stones
  • Construction debris
  • Thick sludge
  • Large fibrous material

For these applications, a dedicated LEO sewage pump with appropriate solids-handling capability or an integrated cutter system should be selected.

Suitable Applications

LEO identifies the QDX-LA range for small irrigation and drainage equipment, rural well-water pumping, farming irrigation and drainage, industrial/construction accumulated-water drainage and aquaculture.

Agricultural applications

  • Farm irrigation
  • Agricultural drainage
  • Rural well-water transfer
  • Garden irrigation
  • Livestock water systems

Construction applications

  • Excavation dewatering
  • Foundation drainage
  • Construction-site water removal
  • Accumulated-water drainage

Residential applications

  • Basement drainage
  • Garden watering
  • Water tank drainage
  • Small water-transfer systems

Industrial applications

  • Industrial accumulated-water drainage
  • Utility water transfer
  • Equipment-area drainage

Aquaculture

  • Pond drainage
  • Fish tanks
  • Water transfer
  • Aquaculture water management

Typical Installation

A typical installation is:

Well / drainage pit / pond → QDX 3-18-0.55LA → 1" discharge pipe or hose → drainage point / tank / irrigation system

The pump is submerged directly in the water source.

For permanent installations, the discharge pipe should be adequately supported and should not place excessive mechanical load on the pump outlet.

For portable applications, the pump can be moved between drainage locations as required.

Pump Positioning

For reliable operation:

  • Keep the pump adequately submerged.
  • Position it on a stable surface.
  • Keep the inlet area free from excessive debris.
  • Avoid heavy sediment where possible.
  • Do not exceed 5 m immersion depth.
  • Do not use the electrical cable as a lifting rope.
  • Protect the cable from abrasion and mechanical damage.
  • Ensure the float/automatic-control arrangement, where supplied, can move freely.

Main Product Advantages

  1. 0.55 kW / approximately 0.73 HP motor.
  2. 220 V / 50 Hz single-phase operation.
  3. Up to 200 L/min published flow.
  4. Approximately 12 m³/h maximum flow.
  5. Approximately 19.2 m maximum head.
  6. 18 m rated head.
  7. Compact 1-inch / 25 mm discharge.
  8. Cast-iron pump body.
  9. Anti-rust pump-body treatment.
  10. Aluminium motor casing.
  11. Stainless-steel shaft.
  12. Double-end mechanical seal.
  13. Copper motor winding.
  14. Built-in thermal protection.
  15. Class F insulation.
  16. IP68 protection.
  17. 5 m maximum immersion depth.
  18. 40°C maximum liquid temperature.
  19. Suitable for irrigation, drainage, construction dewatering, wells and aquaculture.
  20. Compact design suitable for portable and fixed installations.

Product Details Summary

The LEO QDX 3-18-0.55LA is a 0.55 kW / approximately 0.73 HP single-phase submersible drainage pump designed for irrigation, rural well-water pumping, agricultural drainage, construction dewatering, aquaculture and general water-transfer applications. Operating at 220 V / 50 Hz, it provides up to 200 L/min (12 m³/h) with a maximum head of approximately 19.2 m and an 18 m rated head, using a 1-inch / 25 mm discharge outlet. The QDX-LA construction features a cast-iron pump body with anti-rust treatment, aluminium motor casing, stainless-steel shaft and double-end mechanical seal, together with copper motor winding, built-in thermal protection, Class F insulation and IP68 protection. The pump is suitable for immersion up to 5 metres and liquids up to 40°C, with a recommended liquid pH of 6.5–8 and maximum sand content of 0.1%. Because the permitted suspended-solid passage is approximately 0.2 mm, this model is best suited to clean or lightly contaminated drainage water rather than heavy raw sewage containing large solids or fibrous material.

SEO Product Title

LEO QDX 3-18-0.55LA Submersible Drainage Pump 0.73HP 0.55kW – 19.2M Head

SEO Product Description

LEO QDX 3-18-0.55LA Submersible Drainage Pump is a compact 0.73HP / 0.55kW, 220V single-phase submersible pump designed for drainage, irrigation, rural well-water pumping, construction dewatering, aquaculture and general water-transfer applications. Delivering up to 200L/min (12m³/h) with a maximum head of approximately 19.2 metres, the pump features a 1-inch / 25mm discharge outlet, cast-iron pump body with anti-rust treatment, aluminium motor casing, stainless-steel shaft and double-end mechanical seal. It also incorporates copper motor winding, built-in thermal protection, Class F insulation and IP68 protection, with a maximum immersion depth of 5 metres and maximum liquid temperature of 40°C. Designed for clean and lightly contaminated water with suspended solids up to approximately 0.2mm, the LEO QDX 3-18-0.55LA is suitable for agricultural drainage, irrigation, construction sites, wells, ponds, tanks and aquaculture applications.



 Inquiry - LEO SEWAGE SUBMERSIBLE PUMPS - QDX 3-18-0.55LA