B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO SEWAGE SUBMERSIBLE PUMPS - 80 WQ 40-9-2.2 T/QG



The LEO 80 WQ 40-9-2.2 T/QG is a heavy-duty submersible sewage and wastewater pump designed for efficient removal of dirty water, wastewater and sewage in commercial, industrial, construction and municipal applications. It combines a 2.2 kW (3 HP) three-phase motor, 3-inch discharge, high flow capacity and a compact submersible design for reliable dewatering performance. LEO specifications list the model with a maximum flow of approximately 933.3 L/min (56 m³/h) and maximum head of 21 m.

Product Specifications

Specification Details
Brand LEO
Series WQ Sewage Submersible Pump
Model 80 WQ 40-9-2.2 T/QG
Pump Type Submersible Sewage / Wastewater Pump
Motor Power 2.2 kW / 3 HP
Voltage 415 V, 3 Phase, 50 Hz
Rated Speed 3,000 RPM
Discharge Size 3"
Maximum Flow Rate 933.3 L/min / approx. 56 m³/h
Maximum Head 21 m
Pump Connection 80 mm
Motor Type Submersible electric motor
Maximum Liquid Temperature 35°C
Pump Body Cast iron
Impeller Cast iron
Motor Body Cast iron
Mechanical Seal SiC-SiC / Carbon-Ceramic
Approx. Product Weight 31.9–32 kg
Application Sewage, wastewater, dirty-water drainage and dewatering

The published LEO WQ specification table gives 380 V, 2.2 kW, 3 HP, 3-inch outlet, 56 m³/h maximum flow and 21 m maximum head at 3,000 rpm; Malaysian supplier specifications commonly list the three-phase version as 415 V, 50 Hz.

Key Features

High-flow sewage pumping: With a maximum capacity of approximately 56 m³/h, this pump is suitable for moving substantial volumes of wastewater and dirty water.

3 HP three-phase motor: The 2.2 kW motor provides the power required for demanding continuous-duty drainage and wastewater applications. The 415 V three-phase configuration makes it suitable for industrial and commercial electrical installations.

3-inch discharge outlet: The large 3-inch outlet supports high-volume water transfer while helping reduce flow restriction in suitable discharge piping.

Submersible construction: The pump is designed to operate while submerged, allowing it to be positioned directly inside drainage pits, sumps, tanks and wastewater collection areas.

Heavy-duty construction: The WQ series uses a cast-iron pump body, impeller, motor body and base, providing a robust construction for demanding drainage and wastewater environments.

Mechanical shaft sealing: LEO specifies a SiC-SiC / Carbon-Ceramic mechanical seal arrangement for models in this power range, helping protect the motor from water ingress during operation.

High pumping head: The model has a published maximum head of 21 m, making it suitable for applications requiring both high flow and vertical lifting capability.

Thermal protection: The WQ construction includes a thermal-protection arrangement to help protect the motor against excessive operating temperature.

Typical Applications

The LEO 80 WQ 40-9-2.2 T/QG can be used for:

  • Sewage and wastewater pumping
  • Wastewater collection tanks
  • Drainage pits and sumps
  • Construction-site dewatering
  • Basement and underground drainage
  • Commercial building drainage
  • Industrial wastewater transfer
  • Municipal drainage systems
  • Dirty-water removal
  • Floodwater and accumulated-water drainage
  • Factory and workshop drainage
  • Water treatment and wastewater handling systems

The WQ range is intended for sewage, wastewater and dirty-water management, including commercial, industrial and municipal dewatering applications.

Dimensions

Published LEO dimensional data for the standard 80WQ40-9-2.2 version gives approximately 710 × 260 × 290 mm overall package dimensions, while another LEO technical document for the T/QG version gives approximately 604 × 289 × 249 mm. Dimensions can therefore vary according to the exact production/configuration version, so the actual supplied unit should be checked against its nameplate or manufacturer dimensional drawing before installation.

Model Number Explanation

80 WQ 40-9-2.2 T/QG

  • 80 – nominal pump/discharge class, associated with the 80 mm / 3-inch WQ model
  • WQ – LEO sewage/wastewater submersible pump series
  • 40 – nominal flow designation
  • 9 – model designation within the hydraulic range
  • 2.2 – 2.2 kW motor power
  • T – three-phase configuration
  • QG – cutter/grinder configuration designation used for the applicable WQ/QG version

The T/QG version is listed separately from the standard 80 WQ 40-9-2.2 model in LEO-related catalogues and supplier listings.

SEO Product Description

LEO 80 WQ 40-9-2.2 T/QG 3HP 2.2kW Sewage Submersible Pump is a heavy-duty three-phase wastewater and sewage pump designed for efficient drainage, dewatering and dirty-water transfer. Powered by a 2.2 kW / 3 HP motor and equipped with a 3-inch discharge outlet, it delivers up to approximately 933.3 L/min (56 m³/h) with a maximum head of 21 m. Its durable cast-iron construction, submersible design and mechanical sealing system make it suitable for demanding sewage, wastewater, construction, industrial, commercial and municipal drainage applications.

Recommended Product Title

LEO 80 WQ 40-9-2.2 T/QG 3HP 2.2kW 3" Three Phase Sewage Submersible Pump

Short Product Description

LEO 80 WQ 40-9-2.2 T/QG is a 3 HP / 2.2 kW three-phase sewage submersible pump with a 3-inch discharge, maximum flow of approximately 56 m³/h and maximum head of 21 m. Built for heavy-duty wastewater, sewage, dirty-water drainage and dewatering applications, it is suitable for construction sites, commercial buildings, industrial facilities and municipal drainage systems.



 Inquiry - LEO SEWAGE SUBMERSIBLE PUMPS - 80 WQ 40-9-2.2 T/QG