The LEO 80 WQ 40-12-3 T/QG is a heavy-duty 3" three-phase submersible sewage pump with cutter impeller, designed for pumping wastewater, sewage, dirty water and liquids containing fibrous or organic matter. It is powered by a 3.0 kW / 4 HP motor and is suitable for demanding drainage applications in factories, construction sites, commercial facilities, municipal sewage systems and wastewater treatment installations.
Product Specifications
| Specification | Details |
|---|---|
| Brand | LEO |
| Product Series | WQ Submersible Sewage Pump |
| Model | 80 WQ 40-12-3 T/QG |
| Pump Type | Submersible Sewage Pump with Cutter |
| Motor Power | 3.0 kW / 4 HP |
| Voltage | 415 V |
| Frequency | 50 Hz |
| Phase | 3 Phase |
| Motor Speed | 3,000 RPM |
| Discharge Size | 3" / 80 mm |
| Maximum Flow Rate | 1,133.3 L/min / approx. 68 m³/h |
| Nominal Flow | Approx. 667 L/min |
| Maximum Head | 21 m |
| Nominal Head | Approx. 12 m |
| Maximum Immersion Depth | Up to 25 m for WQ series; some model-specific references specify 10 m |
| Maximum Liquid Temperature | 40°C |
| Liquid pH | Approx. 4–10 |
| Protection Class | IP68 / IPX8 |
| Insulation Class | F |
| Motor Winding | Copper |
| Mechanical Seal | Double mechanical seal |
| Pump Body | Cast iron |
| Impeller | Cutter-type impeller |
| Discharge Connection | Hose coupler |
| Cable | 10 m for units below 30 kW |
| Approx. Gross Weight | 44 kg |
| Packing Dimensions | Approx. 744 × 324 × 289 mm |
The Malaysian LEO WQ-series listing specifies 415 V, 3.0 kW, 4 HP, 3" outlet, 1,133.3 L/min maximum flow and 21 m maximum head at 3,000 rpm.
Key Features
3.0 kW / 4 HP three-phase motor: The motor provides sufficient power for high-volume wastewater and sewage pumping in demanding commercial, industrial and municipal installations.
High-flow performance: Maximum capacity is approximately 1,133.3 L/min, equivalent to about 68 m³/h, allowing the pump to move a substantial volume of wastewater efficiently.
Maximum head up to 21 m: The pump is designed to provide substantial vertical lifting capability while maintaining high-volume drainage performance. LEO's Malaysian WQ-series data lists a maximum head of 21 m for this model.
Cutter impeller system: The T/QG configuration incorporates a cutter system designed for sewage and wastewater containing fibrous or organic materials. LEO describes its cutter-type sewage pumps as suitable for applications where clogging resistance is important.
3-inch discharge: The 80 mm / 3-inch discharge connection provides a relatively large flow passage for high-volume drainage and wastewater transfer.
Heavy-duty cast-iron construction: The pump is constructed for demanding drainage environments, with cast-iron components providing mechanical durability for industrial and commercial use.
IP68 motor protection: The enclosed submersible motor is designed for operation in submerged conditions. LEO's WQ range specifies IPX8 protection, while the Malaysian model listing identifies IP68 protection.
Copper motor winding: The motor uses copper winding and is designed with a high insulation/protection specification for submersible operation.
Double mechanical seal: The pump incorporates a double mechanical sealing arrangement to help protect the motor and internal components against water ingress.
Leak-proof protection: The T/QG configuration is equipped with a leak-proof detector arrangement, providing additional protection against water penetration into the motor section.
Oil-jacket construction: The model is listed with an oil-jacket arrangement that helps manage heat around the mechanical seal and provides additional protection during submerged operation.
Operating Conditions
The WQ series is designed for demanding wastewater and drainage environments. LEO lists applications including factory wastewater drainage, commercial facilities, municipal sewage treatment plants, residential drainage stations, municipal projects and agricultural applications.
For the 80 WQ 40-12-3 T/QG, published model-specific data indicates:
- Maximum liquid temperature: 40°C
- Liquid pH range: approximately 4–10
- Maximum immersion/installation depth: model-specific specifications vary; confirm the nameplate/manual for the installation configuration
- Three-phase power supply
- Submersible operation
- Non-potable wastewater/sewage applications
Typical Applications
The LEO 80 WQ 40-12-3 T/QG is suitable for:
- Sewage pumping
- Wastewater drainage
- Factory wastewater
- Industrial wastewater transfer
- Construction-site dewatering
- Commercial building drainage
- Municipal sewage treatment plants
- Sewage collection tanks
- Drainage stations
- Septic and wastewater pits
- Basement and underground drainage
- Agricultural wastewater
- Methane/biogas pool drainage
- Field irrigation
- Floodwater and accumulated-water removal
LEO specifically identifies factories, construction sites, commercial facilities, municipal sewage treatment plants, residential drainage stations and municipal projects among the WQ series applications.
Cutter Pump Advantage
The QG cutter configuration is particularly useful when wastewater contains materials that can cause conventional pumps to clog. The cutter mechanism helps process fibrous and organic matter before discharge, improving the pump's suitability for sewage and contaminated wastewater applications.
This makes the pump appropriate for wastewater containing materials such as fibres, paper, organic matter and other long-string materials, provided the material characteristics remain within the manufacturer's permitted operating conditions.
Performance Summary
| Performance Parameter | Specification |
|---|---|
| Motor | 3.0 kW / 4 HP |
| Maximum Flow | 1,133.3 L/min |
| Approx. Maximum Flow | 68 m³/h |
| Nominal Flow | Approx. 667 L/min |
| Maximum Head | 21 m |
| Nominal Head | Approx. 12 m |
| Outlet | 3" / 80 mm |
| Speed | 3,000 RPM |
| Voltage | 415 V |
| Frequency | 50 Hz |
| Phase | 3 Phase |
The LEO/Malaysia specification table confirms the model's 3.0 kW motor, 4 HP rating, 3-inch outlet, 1,133.3 L/min maximum flow and 21 m maximum head.
Model Number Explanation
80 WQ 40-12-3 T/QG
- 80 – 80 mm / 3-inch discharge class
- WQ – LEO WQ submersible sewage pump series
- 40 – nominal model/flow designation
- 12 – nominal head designation
- 3 – 3.0 kW motor power
- T – three-phase configuration
- QG – cutter/grinding configuration
The LEO product range lists the 80 WQ 40-12-3 T/QG as the higher-powered alternative to the 80 WQ 40-9-2.2 T/QG, increasing motor power from 2.2 kW to 3.0 kW and maximum flow from approximately 933.3 L/min to 1,133.3 L/min while retaining a 21 m maximum head.
SEO Product Description
LEO 80 WQ 40-12-3 T/QG 4HP 3.0kW 3" Three Phase Cutter Sewage Submersible Pump is a heavy-duty wastewater and sewage pump engineered for high-volume drainage, industrial wastewater transfer and demanding dewatering applications. Equipped with a 3.0 kW / 4 HP three-phase motor, 3-inch discharge outlet and cutter impeller, the pump delivers a maximum flow of approximately 1,133.3 L/min (68 m³/h) and a maximum head of 21 m. Its IP68/IPX8 submersible construction, copper motor winding, double mechanical seal, leak-proof protection and robust cast-iron construction make it suitable for factories, construction sites, commercial buildings, municipal sewage treatment plants, drainage stations and other wastewater management systems.
Recommended Product Title
LEO 80 WQ 40-12-3 T/QG 4HP 3.0kW 3" Three Phase Cutter Sewage Submersible Pump
Short Product Description
LEO 80 WQ 40-12-3 T/QG is a 4 HP / 3.0 kW three-phase sewage submersible pump featuring a 3-inch cutter discharge system, maximum flow of approximately 1,133.3 L/min (68 m³/h) and maximum head of 21 m. Designed for high-volume sewage, wastewater, dirty-water drainage and dewatering, it is suitable for industrial, commercial, construction and municipal applications.
Inquiry - LEO SEWAGE SUBMERSIBLE PUMPS - 80 WQ 40-12-3 T/QG