B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO STAINLESS STEEL SUBMERSIBLE - XQS 14.5-42/3-1.5I



The LEO XQS 14.5-42/3-1.5I is a heavy-duty 2 HP / 1.5 kW single-phase stainless-steel submersible pump designed for high-head water transfer, irrigation, drainage, wells, swimming pools, tanks, reservoirs and general clean or slightly contaminated water applications. It features a 2-inch discharge, maximum head of approximately 42 m, and maximum flow of approximately 14.5 m³/h (240 L/min) according to LEO's model-specific product information.

The pump combines a stainless-steel motor housing and shaft with HT200 cast-iron hydraulic components, copper motor winding, built-in thermal protection and IP68 protection. It is a 220 V, 50 Hz single-phase model with a float switch for automatic water-level operation.

Product Specifications

Specification Details
Brand LEO
Model XQS 14.5-42/3-1.5I
Product Type Stainless Steel Submersible Pump
Pump Series XQS
Motor Power 1.5 kW / 2 HP
Voltage 220 V
Frequency 50 Hz
Phase Single Phase
Maximum Flow 14.5 m³/h
Maximum Flow Approx. 240 L/min
Maximum Head 42 m
Maximum Pressure Approx. 4.2 bar
Discharge Size 2" / 50 mm
Motor Winding Copper
Motor Shaft Stainless-Steel Welded Shaft
Motor Housing HT200 Cast Iron / Stainless-Steel Configuration
Impeller HT200 Cast Iron
Pump Body HT200 Cast Iron with Stainless-Steel Housing
Mechanical Seal Ceramic / Carbon
Insulation Class B
Protection Class IP68
Thermal Protection Built-In
Maximum Immersion Depth 5 m
Maximum Liquid Temperature 40°C
Recommended Liquid pH 6.5–8
Installation Vertical Submerged
Float Switch Yes
Approx. Gross Weight 26.8 kg
Packing Dimensions Approx. 625 × 285 × 205 mm

The LEO product page specifies 14.4–14.5 m³/h maximum flow, 42 m maximum head, 1.5 kW power, 220 V single-phase operation, 5 m maximum immersion depth, 40°C maximum liquid temperature, Class B insulation and IP68 protection.

High-Head Submersible Performance

The XQS 14.5-42/3-1.5I is designed for applications where a submersible pump needs to overcome a substantial vertical lift.

Its published maximum hydraulic values are:

  • Maximum flow: 14.5 m³/h
  • Maximum flow: approximately 240 L/min
  • Maximum head: 42 m
  • Maximum pressure: approximately 4.2 bar
  • Discharge: 2 inches

The 14.5 m³/h and 42 m figures represent different points on the pump performance curve, rather than simultaneous operating conditions. Actual flow will decrease as total system head increases.

For proper pump selection, the required duty point should be determined from the actual flow rate + total dynamic head, including elevation, pipe friction, valves, elbows and other fittings.

2 HP / 1.5 kW Motor

The pump is powered by a 1.5 kW / 2 HP single-phase motor operating at 220 V, 50 Hz. This makes it suitable for locations where standard single-phase electrical power is available.

The motor incorporates:

  • Copper winding
  • Built-in thermal protector
  • Stainless-steel welded shaft
  • Class B insulation
  • IP68 protection

The built-in thermal protector helps protect the motor from excessive temperature during abnormal operating conditions.

Stainless-Steel & Cast-Iron Construction

Despite being marketed as a stainless-steel submersible pump, the XQS 14.5-42/3-1.5I is a combination-material design rather than a completely stainless-steel hydraulic assembly.

The construction includes:

  • Stainless-steel motor housing/components
  • Stainless-steel welded shaft
  • HT200 cast-iron impeller
  • HT200 cast-iron hydraulic components
  • Carbon/ceramic mechanical seal

The LEO technical information identifies the shaft as stainless steel and the hydraulic components such as the impeller as HT200 cast iron.

This combination provides a balance between mechanical strength, corrosion resistance and cost.

Multistage / High-Head Hydraulic Configuration

The XQS 14.5-42/3-1.5I is configured for substantially higher head than the XQS 15-30/2-1.1I.

Its 42 m maximum head makes it suitable for:

  • Deep water transfer
  • Elevated storage tanks
  • High-level irrigation
  • Pressure irrigation
  • Long discharge pipelines
  • Well-water transfer
  • Agricultural water supply
  • Construction water transfer

The model is specifically listed for semi-deep wells, swimming-pool drainage, agricultural water pumping and pressurized irrigation.

Hydraulic Performance

Parameter Specification
Maximum Flow 14.5 m³/h
Maximum Flow Approx. 240 L/min
Maximum Head 42 m
Maximum Pressure Approx. 4.2 bar
Discharge 2" / 50 mm
Motor Power 1.5 kW / 2 HP

Some secondary listings report the maximum flow as 250 L/min, while LEO's model-specific page specifies approximately 240 L/min / 14.4 m³/h. For a website product listing, 14.5 m³/h / 240 L/min is the safer model-specific specification.

2-Inch Discharge

The pump is equipped with a 2-inch / 50 mm discharge outlet.

This relatively large discharge allows the pump to move substantial quantities of water while helping reduce friction losses compared with smaller discharge connections.

The 2-inch outlet makes the pump particularly suitable for:

  • Irrigation pipelines
  • Water-transfer systems
  • Swimming-pool drainage
  • Tank filling
  • Reservoir transfer
  • Construction drainage

For long discharge runs, the pipe diameter should be selected according to the required flow and total pipe length rather than simply matching the pump outlet.

IP68 Protection

The motor is rated IP68, making it suitable for submerged operation within the manufacturer's specified conditions. LEO specifies a maximum immersion depth of 5 m for the XQS series.

This is suitable for applications involving:

  • Wells
  • Tanks
  • Reservoirs
  • Swimming pools
  • Collection pits
  • Irrigation ponds
  • Drainage areas

The pump should remain sufficiently submerged during operation because the surrounding water provides the required cooling for the motor. Dry running can cause motor and mechanical-seal damage.

Float Switch & Automatic Operation

The single-phase XQS series incorporates a float switch, which automatically controls the pump according to water level. When the water level reaches the appropriate level, the float initiates operation; when the water level falls, it switches the pump off.

This is useful for:

  • Automatic drainage
  • Water-level control
  • Tank emptying
  • Pool drainage
  • Rainwater collection
  • Irrigation reservoirs

The float should always have sufficient free movement and should not be trapped against the tank wall or pipework.

Water Temperature & Fluid Conditions

The XQS series is designed for water and liquids with similar physical and chemical characteristics.

Published operating conditions include:

  • Maximum liquid temperature: 40°C
  • Recommended pH: 6.5–8
  • Maximum immersion: 5 m
  • Installation: Vertical
  • Fluid: Clean or slightly contaminated water

LEO describes the XQS range as suitable for clean or slightly dirty water and similar liquids.

It should not be considered a dedicated sewage grinder pump. For heavy sewage containing significant solids, fibres or clogging materials, a dedicated LEO WQ/SWP/SWE sewage pump is more appropriate.

Typical Applications

The LEO XQS 14.5-42/3-1.5I is suitable for:

Agricultural

  • Farm irrigation
  • Field irrigation
  • Garden irrigation
  • Greenhouse irrigation
  • Pressurized irrigation
  • Livestock water supply

Domestic

  • Well-water transfer
  • Tank filling
  • Reservoir transfer
  • Swimming-pool drainage
  • Household water transfer
  • Garden watering

Construction

  • Excavation drainage
  • Temporary water removal
  • Construction-site drainage
  • Water transfer

Industrial

  • Process-water transfer
  • Cooling-water transfer
  • Collection-tank drainage
  • General water transfer

LEO's XQS documentation specifically lists urban well-water pumping, field irrigation and drainage, garden irrigation, household water supply, industrial accumulated-water drainage, construction water supply/drainage and livestock applications.

Suitable Water Sources

The pump can be used in:

  • Wells
  • Water tanks
  • Reservoirs
  • Irrigation ponds
  • Swimming pools
  • Rainwater collection tanks
  • Collection pits
  • Water reservoirs

The maximum immersion depth should remain within 5 m.

Mechanical Seal

The pump uses a carbon/ceramic mechanical seal. This sealing arrangement separates the motor chamber from the pumped liquid and helps prevent water ingress into the motor.

The mechanical seal is a critical wear component and should be inspected if the pump develops:

  • Water leakage into the motor chamber
  • Abnormal noise
  • Reduced performance
  • Excessive motor heating
  • Unusual vibration

The XQS technical documentation identifies the mechanical-seal materials as ceramic/carbon.

Motor & Electrical Protection

The electrical system incorporates several protective characteristics:

Copper winding:
Provides good electrical conductivity and thermal performance.

Thermal protector:
Protects the motor against overheating.

Class B insulation:
Provides the specified thermal insulation rating for the motor.

IP68 protection:
Allows submerged operation within specified conditions.

These features are part of the XQS series' design for reliable submerged operation.

Dimensions & Weight

The LEO catalogue identifies the following packing data for the exact model:

Dimension / Weight Specification
Packing Length 625 mm
Packing Width 285 mm
Packing Height 205 mm
Gross Weight Approx. 26.8 kg

The catalogue lists the XQS 14.5-42/3-1.5I at 26.8 kg, compared with approximately 23.3 kg for the XQS 15-30/2-1.1I.

A technical listing gives the approximate overall pump height as 567 mm, although packing dimensions should not be confused with the actual pump dimensions.

Model Number Explanation

XQS 14.5-42/3-1.5I

  • XQS – LEO stainless-steel submersible pump series
  • 14.5 – maximum flow approximately 14.5 m³/h
  • 42 – maximum head approximately 42 m
  • /3 – hydraulic/model configuration designation
  • 1.5 – 1.5 kW motor
  • I – model/configuration designation

The exact model is listed by LEO as XQS 14.5-42/3-1.5 I with 14.4 m³/h maximum flow, 42 m maximum head and 1.5 kW power.

XQS 14.5-42/3-1.5I vs XQS 15-30/2-1.1I

Specification XQS 14.5-42/3-1.5I XQS 15-30/2-1.1I
Motor Power 1.5 kW / 2 HP 1.1 kW / 1.5 HP
Voltage 220 V 220 V
Phase Single Phase Single Phase
Maximum Flow 14.5 m³/h 15 m³/h
Maximum Head 42 m 30 m
Discharge 2" 2"
Maximum Pressure Approx. 4.2 bar Approx. 3 bar
Immersion Depth 5 m 5 m
Protection IP68 IP68
Insulation Class B Class B
Main Advantage Higher head Lower power / slightly higher max flow

The main difference is that the XQS 14.5-42/3-1.5I provides substantially greater head, making it the better choice for high-lift and pressure-irrigation applications.

Installation Recommendations

For reliable operation:

  1. Install the pump vertically.
  2. Ensure the pump is fully and adequately submerged before starting.
  3. Do not exceed the 5 m maximum immersion depth.
  4. Use suitable 2-inch discharge piping.
  5. Minimize unnecessary elbows and restrictions.
  6. Ensure the suction/inlet area is free from leaves and large debris.
  7. Use the supplied or appropriate float-switch arrangement.
  8. Connect the 220 V supply through suitable electrical protection.
  9. Ensure proper grounding/earthing.
  10. Do not operate the pump dry.
  11. Keep the pumped liquid below 40°C.
  12. Maintain the recommended fluid pH range of 6.5–8.
  13. Use a suitable strainer where leaves or debris are present.
  14. Inspect the mechanical seal and cable periodically.
  15. Do not use the pump for heavy sewage, thick sludge or highly abrasive liquids.

LEO specifically warns that the XQS pump relies on water for motor cooling and that dry running can damage the motor.

Key Advantages

The LEO XQS 14.5-42/3-1.5I offers:

  • 2 HP / 1.5 kW motor
  • 220 V single-phase operation
  • 2-inch discharge
  • 14.5 m³/h maximum flow
  • 240 L/min maximum flow
  • 42 m maximum head
  • Approx. 4.2 bar maximum pressure
  • Stainless-steel welded shaft
  • Stainless-steel motor housing/configuration
  • HT200 cast-iron hydraulic components
  • Copper motor winding
  • Carbon/ceramic mechanical seal
  • Built-in thermal protection
  • Class B insulation
  • IP68 protection
  • 5 m maximum immersion depth
  • 40°C maximum liquid temperature
  • Float-switch automatic operation
  • Suitable for irrigation, drainage and water transfer

SEO Product Description

LEO XQS 14.5-42/3-1.5I 2HP 1.5kW 220V 2" Stainless Steel Submersible Water Pump is a high-head single-phase submersible pump designed for agricultural irrigation, garden watering, well-water transfer, swimming-pool drainage, tank drainage, construction drainage and general water transfer. Powered by a 1.5 kW / 2 HP 220 V motor, it delivers up to approximately 14.5 m³/h (240 L/min) with a maximum head of 42 m. The pump features a 2-inch discharge, stainless-steel welded shaft, copper motor winding, HT200 cast-iron impeller, carbon/ceramic mechanical seal, built-in thermal protection, Class B insulation and IP68 protection. With a maximum immersion depth of 5 m and automatic float-switch operation, it is suitable for wells, reservoirs, irrigation systems, tanks, pools and construction sites.



 Inquiry - LEO STAINLESS STEEL SUBMERSIBLE - XQS 14.5-42/3-1.5I