LEO XQS39-8/0.75I is a 1 HP stainless-steel submersible drainage pump designed for high-volume water transfer, irrigation, drainage and general water-supply applications. LEO specifies the XQS series for urban well-water pumping, field and garden irrigation, household water supply, construction drainage and accumulated industrial water.
LEO STAINLESS STEEL SUBMERSIBLE PUMP – XQS39-8/0.75I
Product Description
The LEO XQS39-8/0.75I is a compact, high-flow submersible pump powered by a 0.75 kW (1 HP) single-phase motor. It is designed for applications requiring rapid drainage and water transfer, delivering a maximum flow rate of 650 L/min (39 m³/h) with a maximum head of 8 metres. The pump operates on 220 V, 50 Hz electrical supply and is suitable for continuous submersible operation within its specified operating limits.
The pump incorporates a copper motor winding, stainless-steel welded shaft, built-in thermal protector, Class B insulation and IP68 protection, providing protection for the motor during submerged operation. LEO specifies a maximum immersion depth of 5 metres, maximum liquid temperature of 40°C, and allowable liquid pH range of 6.5–8.
The XQS39-8/0.75I is particularly suitable where high water volume and relatively low delivery head are required, such as construction-site drainage, agricultural irrigation, garden drainage, basement/sump drainage and transferring accumulated water.
Key Features
- Brand: LEO
- Series: XQS Stainless Steel Submersible Pump
- Model: XQS39-8/0.75I
- Motor Power: 0.75 kW / 1 HP
- Power Supply: 220 V
- Frequency: 50 Hz
- Phase: Single Phase
- Maximum Flow Rate: 650 L/min
- Maximum Flow: Approximately 39 m³/h
- Maximum Head: 8 m
- Maximum Immersion Depth: 5 m
- Maximum Liquid Temperature: 40°C
- Permitted Liquid pH: 6.5–8
- Motor Protection: IP68
- Insulation Class: B
- Motor Winding: Copper
- Shaft: Stainless-steel welded shaft
- Mechanical Seal: Carbon/Ceramic
- Impeller: HT200 cast iron
- Pump Body: HT200 cast iron
- Outlet: Approximately 2½-inch class outlet configuration
- Built-in Thermal Protection: Yes
- Float Switch: Available/configured for the listed XQS39-8/0.75I version in Malaysian retail listings.
Technical Specifications
| Specification | XQS39-8/0.75I |
|---|---|
| Model | XQS39-8/0.75I |
| Pump Type | Stainless Steel Submersible Pump |
| Application | Drainage / Irrigation / Water Transfer |
| Motor Power | 0.75 kW / 1 HP |
| Voltage | 220 V |
| Frequency | 50 Hz |
| Motor Phase | Single Phase |
| Max. Flow | 650 L/min |
| Max. Flow | Approx. 39 m³/h |
| Max. Head | 8 m |
| Max. Immersion | 5 m |
| Max. Liquid Temperature | +40°C |
| Liquid pH Range | 6.5–8 |
| Protection Class | IP68 |
| Insulation Class | B |
| Shaft Material | Stainless Steel |
| Motor Winding | Copper |
| Mechanical Seal | Carbon / Ceramic |
| Impeller Material | HT200 |
| Pump Body Material | HT200 Cast Iron |
| Gross Weight | Approx. 21.6 kg |
| Packing Dimensions | Approx. 580 × 320 × 250 mm |
The published LEO technical data lists the XQS39-8/0.75I at 650 L/min maximum flow, 8 m maximum head, 21.6 kg gross weight and 580 × 320 × 250 mm packing dimensions.
Motor & Construction
Copper Winding Motor: The motor uses copper windings for reliable electrical performance and heat dissipation.
Stainless-Steel Shaft: The welded stainless-steel shaft provides corrosion resistance and structural durability in submerged applications.
Built-in Thermal Protector: The motor incorporates thermal protection to help protect the winding against excessive temperature.
IP68 Protection: The IP68-rated motor enclosure is designed for submerged operation within the specified 5 m maximum immersion depth.
Carbon/Ceramic Mechanical Seal: The mechanical seal arrangement provides separation between the pumped liquid and motor section and is specified as carbon/ceramic for this model.
HT200 Impeller and Pump Body: The hydraulic components use HT200 cast iron, providing a robust construction suitable for general drainage and water-transfer duties.
Applications
The LEO XQS39-8/0.75I can be used for:
- Construction-site water drainage
- Basement and sump drainage
- Agricultural irrigation
- Garden irrigation
- Water transfer
- Drainage of accumulated rainwater
- Industrial accumulated-water drainage
- Residential water supply and drainage
- Livestock and agricultural facilities
- General clean-water pumping
- Urban well-water pumping
- Temporary dewatering operations
LEO specifically identifies the XQS range for irrigation, drainage, household water supply, construction, livestock breeding and accumulated industrial water applications.
Performance
The 39 m³/h maximum flow is the main strength of this model. With a maximum head of only 8 m, it is best suited to high-volume, low-head drainage and transfer duties rather than high-pressure water boosting.
For example, it is appropriate when the priority is moving a large quantity of water from a sump, pit, construction area, tank or low-lying area to a nearby discharge point. Actual flow will decrease as the required discharge head and system resistance increase, so the maximum 650 L/min figure should not be interpreted as the flow available at 8 m head. The pump's hydraulic performance curve should be used when selecting the pump for a specific installation.
Product Advantages
- High-volume water transfer – Maximum capacity of 650 L/min makes the pump suitable for rapid drainage.
- 1 HP single-phase motor – Practical for applications where a 220 V electrical supply is available.
- IP68 protection – Designed for submerged operation.
- Thermal protection – Helps protect the motor from overheating.
- Stainless-steel shaft – Provides durability and corrosion resistance.
- Carbon/ceramic mechanical seal – Provides reliable separation of the motor and pumped liquid.
- Compact submersible design – The pump can be positioned directly inside the water source or sump.
- Wide application range – Suitable for irrigation, drainage, construction and general water-transfer applications.
- Float-switch configuration – Malaysian listings identify the XQS39-8/0.75I version with a float, providing automatic level-control capability where correctly installed.
SEO Product Title
LEO XQS39-8/0.75I 1HP Stainless Steel Submersible Drainage Pump 220V High Flow 650L/Min
SEO Product Description
LEO XQS39-8/0.75I 1HP Stainless Steel Submersible Pump is a high-flow drainage and water-transfer pump designed for irrigation, construction-site drainage, sump pumping, garden drainage and general water-transfer applications. Powered by a 0.75 kW (1 HP) 220 V single-phase motor, it delivers up to 650 L/min (39 m³/h) with a maximum head of 8 m. The pump features a copper winding motor, stainless-steel welded shaft, built-in thermal protection, Class B insulation and IP68 protection for reliable submerged operation up to 5 m. With durable HT200 construction and a carbon/ceramic mechanical seal, the LEO XQS39-8/0.75I provides a practical solution for high-volume, low-head drainage and water-transfer requirements.
Inquiry - LEO STAINLESS STEEL SUBMERSIBLE - XQS 39-8/0.75I