B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO FOUNTAIN PUMPS - XKF-110P



The LEO XKF-110P is the highest-capacity model in the standard XKF fountain-pump range, featuring a 110 W single-phase motor, maximum flow of 3,750 L/h (62.5 L/min) and maximum head of 3.7 m. It is designed for decorative fountains, garden ponds, waterfalls, watercourses, pond filtration and oxygen enrichment. LEO specifies a 220–240 V / 50 Hz supply, 19 mm outlet and 10 m H05RN-F cable.

Product Description

The LEO XKF-110P is a compact, fully submersible fountain pump designed to provide continuous water circulation and decorative fountain effects. With 110 W input power, it offers the highest flow and head within the standard XKF-15P to XKF-110P range.

Its maximum rated flow is 3,750 L/h, equivalent to approximately 62.5 L/min, while the maximum head is 3.7 m. This makes the XKF-110P suitable for larger decorative ponds, higher fountain displays and more demanding water-feature circulation compared with the smaller XKF models.

LEO's official XKF range is intended for pond-water filtration, decorative pond applications and oxygen enrichment, with multiple fountain nozzle options available for different water-display patterns.

Key Specifications

Specification LEO XKF-110P
Brand LEO
Model XKF-110P
Product Type Submersible Fountain Pump
Application Fountain / Pond / Water Feature
Input Power 110 W
Motor Power Equivalent Approx. 0.15 HP
Voltage 220–240 V
Frequency 50 Hz
Phase Single Phase
Maximum Flow 3,750 L/h
Maximum Flow 62.5 L/min
Maximum Head 3.7 m
Outlet 19 mm
Cable H05RN-F
Cable Length 10 m
Pump Body Engineering Plastic / Plastic
Installation Fully Submersible
Protection IPX8
Maximum Fluid Temperature 35°C
Maximum Ambient Temperature 40°C
Suitable Liquid Clean Water
Fountain Nozzles Multiple configurations available

LEO's published technical table confirms the XKF-110P at 110 W, 3.7 m maximum head, 3,750 L/h maximum flow, 19 mm outlet and 10 m H05RN-F cable.

Pump Performance

The XKF-110P is designed for high-volume, low-pressure fountain circulation.

Its principal hydraulic ratings are:

  • Maximum flow: 3,750 L/h
  • Maximum flow: approximately 62.5 L/min
  • Maximum head: 3.7 m
  • Input power: 110 W
  • Outlet: 19 mm

The 3,750 L/h figure is the maximum-flow rating under favourable hydraulic conditions. It should not be interpreted as the flow available when operating at the full 3.7 m head.

Actual flow is affected by:

  • Fountain height
  • Hose length
  • Hose internal diameter
  • Nozzle restriction
  • Bends and fittings
  • Filters
  • Valves
  • Overall hydraulic resistance

For fountain design, the required operating point should therefore be below the maximum head/flow limits. LEO notes that pump performance measurements are based on standard hydraulic test conditions.

Fountain Applications

The XKF-110P is suitable for:

  • Large garden fountains
  • Decorative ponds
  • Ornamental water features
  • Small and medium waterfalls
  • Artificial streams
  • Watercourses
  • Pond circulation
  • Pond filtration
  • Water oxygen enrichment
  • Fountain basins
  • Garden water displays
  • Recreational water features
  • Decorative architectural fountains

LEO identifies the XKF series for filtering pond water, beautifying ponds and enriching pond water with oxygen.

Fountain Nozzles

The XKF range can be used with different fountain nozzles to create different visual water patterns.

Common configurations include:

Cascade: Produces a broad cascading water effect and is suitable for decorative ponds and waterfall-style displays.

Water Bell: Creates a circular bell-shaped sheet of water.

Foaming Jet: Produces a more aerated, bubbling fountain effect.

Water Lily: Produces a flower-like decorative spray.

Pelunica: Produces another ornamental fountain pattern.

LEO's catalogue identifies Cascade and Water Bell as standard nozzle configurations, with Foaming Jet, Water Lily and Pelunica available on request.

Some XKF-110P market configurations are supplied with two fountain nozzle types, while other listings indicate multiple interchangeable nozzles. The exact accessory package can therefore vary by market or distributor.

Construction

Engineering Plastic Pump Body

The XKF-110P uses a plastic/engineering-plastic pump casing. This keeps the unit relatively lightweight while providing suitable corrosion resistance for fountain and pond applications. LEO describes the XKF series as small, lightweight, durable and reliable.

Compact Submersible Design

The pump is positioned directly inside the pond or fountain basin. Because it is submerged, there is no conventional suction line required.

19 mm Outlet

The 19 mm outlet is used throughout the larger XKF models, including the XKF-110P.

10 m H05RN-F Cable

The standard 10 m cable provides flexibility when positioning the pump within a garden pond, fountain basin or decorative water installation.

Motor & Protection

The XKF-110P is designed specifically for submerged fountain operation. Published specifications identify IPX8 protection, suitable for full immersion under the manufacturer's specified operating conditions.

Some detailed listings also describe the pump as using a sealed synchronous motor with magnetic impeller drive, contributing to its compact and relatively quiet design.

The pump should be operated according to the manufacturer's installation instructions and should not be allowed to operate dry for extended periods.

Operating Limits

LEO's XKF technical documentation specifies:

  • Maximum fluid temperature: 35°C
  • Maximum ambient temperature: 40°C
  • Supply: 220–240 V / 50 Hz
  • Suitable liquid: Clean water
  • Maximum head: 3.7 m
  • Maximum flow: 3,750 L/h
  • Protection: IPX8
  • Cable: H05RN-F, 10 m

Some regional product listings specify a maximum immersion depth of 3–5 m, so the actual installation depth should be checked against the pump's supplied documentation.

The XKF-110P is intended for clean-water fountain and pond applications and is not designed for sewage, sludge, abrasive slurry or liquids containing significant amounts of fibrous material.

Recommended Applications

1. Garden & Landscape Fountains

The XKF-110P provides significantly more flow and head than the smaller XKF models, making it suitable for larger decorative fountain displays.

2. Decorative Ponds

It can continuously circulate water through a pond or decorative water feature.

3. Waterfalls

With a maximum head of 3.7 m, it can support higher waterfall or cascade installations, subject to actual pipe and fitting losses.

4. Artificial Streams

The 3,750 L/h maximum flow is suitable for creating noticeable water movement in small artificial streams and watercourses.

5. Pond Filtration

The pump can circulate pond water through a compatible filtration system.

6. Oxygen Enrichment

Fountain spray and water movement increase the water's contact with air, assisting oxygen exchange.

7. Architectural Water Features

Its compact submersible configuration makes it suitable for decorative installations in gardens, parks, recreational areas and private properties.

Advantages

  • 110 W efficient motor
  • Maximum flow of 3,750 L/h
  • Approx. 62.5 L/min maximum flow
  • Maximum head of 3.7 m
  • 19 mm outlet
  • 10 m H05RN-F cable
  • Fully submersible design
  • IPX8 protection
  • Lightweight engineering-plastic casing
  • Compact construction
  • Suitable for continuous water circulation
  • Multiple fountain nozzle options
  • Suitable for fountains and waterfalls
  • Suitable for pond filtration
  • Supports pond oxygen enrichment
  • Suitable for decorative watercourses
  • Low electrical consumption relative to its flow capacity

XKF Series Comparison

Model Power Max. Head Max. Flow Outlet Cable
XKF-15P 15 W 1.0 m 850 L/h 13 mm 10 m
XKF-35P 35 W 1.4 m 1,600 L/h 19 mm 10 m
XKF-55P 55 W 2.3 m 2,300 L/h 19 mm 10 m
XKF-75P 75 W 2.7 m 2,650 L/h 19 mm 10 m
XKF-95P 95 W 3.0 m 3,500 L/h 19 mm 10 m
XKF-110P 110 W 3.7 m 3,750 L/h 19 mm 10 m

The XKF-110P is the largest standard model in this XKF range, providing the highest published maximum flow and head.

XKF-110P vs XKF-95P

Feature XKF-95P XKF-110P
Input Power 95 W 110 W
Maximum Flow 3,500 L/h 3,750 L/h
Maximum Head 3.0 m 3.7 m
Outlet 19 mm 19 mm
Cable 10 m 10 m
Best Application Medium fountain Higher/larger fountain installation

The XKF-110P provides a 250 L/h increase in maximum flow and 0.7 m additional maximum head over the XKF-95P.

Important Selection Note

The XKF-110P is a fountain and pond-circulation pump, not a general-purpose drainage pump. Its 3.7 m maximum head is intended for decorative water applications.

For an installation requiring a 3 m high fountain, for example, the available flow will be substantially below the 3,750 L/h maximum because the pump must overcome the vertical lift plus friction and nozzle losses.

For best results, select the pump based on the required operating flow at the actual total dynamic head (TDH) rather than selecting according to the maximum flow figure alone.

Also note that LEO's catalogue cautions against operating the pump against a high head for an extended period because this can contribute to motor overheating.

Technical Product Data

Brand: LEO
Model: XKF-110P
Category: Fountain Pump
Pump Type: Submersible Fountain Pump
Input Power: 110 W
Motor Power: Approx. 0.15 HP
Voltage: 220–240 V
Frequency: 50 Hz
Phase: Single Phase
Maximum Flow: 3,750 L/h
Maximum Flow: Approx. 62.5 L/min
Maximum Head: 3.7 m
Outlet: 19 mm
Cable: H05RN-F
Cable Length: 10 m
Pump Body: Engineering Plastic / Plastic
Protection: IPX8
Maximum Fluid Temperature: 35°C
Maximum Ambient Temperature: 40°C
Suitable Liquid: Clean Water
Installation: Fully Submersible
Applications: Fountains, waterfalls, ponds, watercourses, filtration and oxygen enrichment
Nozzle Options: Cascade, Water Bell, Foaming Jet, Water Lily and Pelunica, depending on configuration.
 

SEO Product Description

LEO XKF-110P 110W Submersible Fountain Pump is a high-capacity, energy-efficient fountain pump designed for decorative ponds, garden fountains, waterfalls, artificial streams, pond filtration and water oxygen enrichment. Operating on 220–240V, 50Hz, the XKF-110P delivers a maximum flow of 3,750L/H (approximately 62.5L/min) and a maximum head of 3.7 metres. It features a durable lightweight plastic construction, 19mm outlet and 10-metre H05RN-F power cable, together with IPX8 protection for submerged operation. Multiple interchangeable fountain nozzle options can be used to create decorative effects such as cascade, water-bell and other fountain patterns. With the highest flow and head in the standard XKF range, the LEO XKF-110P is an excellent choice for larger decorative water features requiring strong circulation, greater fountain height and reliable continuous operation



 Inquiry - LEO FOUNTAIN PUMPS - XKF-110P