The LEO LSPA-500 is a compact 500 W (0.7 HP) single-phase pool and spa circulation pump designed for whirlpools, hydro-massage pools, swimming pools and clean-water circulation systems with filtration. It is a surface-mounted pump with an engineering-plastic body, built-in thermal protection and an AISI 304 stainless-steel shaft. LEO specifies the LSPA series primarily for whirlpools and hydraulic massage pools.
Product Description
The LEO LSPA-500 is designed to provide reliable circulation of clean water through spa, jacuzzi and swimming-pool filtration systems. Its 500 W motor delivers a maximum flow of approximately 13–15 m³/h, depending on the published specification source and test configuration, with a maximum head of 8 m.
The Malaysian LEO distributor specification lists the operating range at 10–210 L/min and 8–2 m head, corresponding to a maximum flow of approximately 12.6 m³/h based on 210 L/min. Other LEO-series documentation lists the LSPA500 at 15 m³/h maximum flow and 8 m maximum head. For a commercial product listing, the manufacturer/distributor's published 10–210 L/min performance range is the safer primary specification.
Key Specifications
| Specification | LEO LSPA-500 |
|---|---|
| Brand | LEO |
| Model | LSPA-500 |
| Product Type | Pool & Spa Water Pump |
| Application | Pool / Spa / Jacuzzi / Whirlpool |
| Motor Power | 0.5 kW / 500 W / 0.7 HP |
| Voltage | 220 V |
| Frequency | 50 Hz |
| Phase | Single Phase |
| Flow Range | 10–210 L/min |
| Maximum Flow | Approx. 12.6 m³/h based on 210 L/min |
| Maximum Head | 8 m |
| Head Range | 8–2 m |
| Inlet | 1⅝ in. |
| Outlet | 1⅝ in. |
| Connection | 1⅝" × 1⅝" |
| Pump Body | Engineering Plastic |
| Shaft | AISI 304 Stainless Steel |
| Insulation Class | B in Malaysian listing / F in LEO global LSPA documentation |
| Protection Class | IPX5 |
| Thermal Protection | Built-in |
| Maximum Liquid Temperature | 50°C |
| Dimensions | 343 × 162 × 187 mm |
| Weight | Approx. 6.2 kg |
The Malaysian distributor lists the LSPA-500 at 220 V, 0.5 kW/0.7 HP, 10–210 L/min, 8–2 m head, 1⅝" × 1⅝" connections, 343 × 162 × 187 mm and 6.2 kg.
Main Applications
The LSPA-500 is suitable for:
- Swimming pools
- Spa pools
- Jacuzzi systems
- Whirlpools
- Hydro-massage pools
- Hot tubs
- Pool filtration systems
- Spa water circulation
- Clean-water circulation
- Small and medium-sized swimming-pool circulation systems
LEO specifically identifies the LSPA series for whirlpools and hydraulic massage pools, while Malaysian distributor information also identifies the LSPA-500 for water circulation with filtration in small and medium-sized swimming pools.
Hydraulic Performance
The published Malaysian performance range is:
Flow: 10–210 L/min
Head: 8–2 m
This means the pump is capable of approximately:
- 10 L/min: at the higher-pressure end of the performance range
- 210 L/min: at the lower-head/high-flow end
- Maximum head: approximately 8 m
- Maximum flow: approximately 12.6 m³/h based on 210 L/min
The flow and head are inversely related. As the required pressure/head increases, available flow decreases.
For pool-system design, the pump should therefore be selected according to the required flow at the actual total dynamic head, rather than using the 210 L/min maximum as the expected operating flow.
Pool Filtration Application
The LSPA-500 is well suited to pool filtration systems because it is designed for continuous clean-water circulation.
A typical installation consists of:
Swimming Pool → Skimmer / Suction Line → LSPA-500 → Filter → Return Line → Swimming Pool
The pump circulates water through the filtration equipment, allowing suspended contaminants to be removed before the water returns to the pool.
The Malaysian product specification specifically identifies water circulation with filter function in small and medium-sized swimming pools as an application.
Spa & Jacuzzi Application
The LSPA-500 is particularly appropriate for spa and jacuzzi installations.
The LSPA series is specifically designed for:
- Whirlpool circulation
- Hydro-massage pools
- Spa water circulation
- Jacuzzi systems
LEO describes the LSPA as a Bathtub Pump series and states that it is mainly used for whirlpools and hydraulic massage pools.
Its compact design and relatively high flow capacity make it suitable where strong water circulation is required without using a large commercial pool pump.
Maximum Water Temperature
The LSPA series is specified for liquid temperatures up to:
50°C
This is particularly relevant for spa and hydro-massage applications, where water can operate at temperatures higher than a conventional swimming pool. LEO's official LSPA documentation specifies a maximum liquid temperature of +50°C.
The actual operating temperature should remain within the manufacturer's specified limits.
Pump Construction
Engineering Plastic Pump Body
The LSPA-500 uses an engineering-plastic pump body. This provides a lightweight and corrosion-resistant housing suitable for clean-water pool and spa applications.
AISI 304 Stainless-Steel Shaft
The shaft is made from AISI 304 stainless steel, providing corrosion resistance in the intended clean-water application.
Polymer/Engineering-Polymer Impeller
Technical LSPA documentation identifies engineering-polymer components within the hydraulic assembly, helping maintain a lightweight and corrosion-resistant construction.
Motor Protection
The LSPA-500 incorporates a built-in thermal protector.
The thermal protection is designed to help protect the motor from overheating during abnormal operating conditions.
LEO's official LSPA documentation also specifies:
- Insulation class: F
- Enclosure protection: IPX5
- Built-in thermal protector
One Malaysian listing specifies insulation class B, so there is a discrepancy between regional specifications. For a formal catalogue, it is preferable to use Class F when following LEO's current global LSPA documentation and to avoid stating both classes unless the exact regional nameplate has been verified.
Self-Priming / Suction Capability
Some LSPA-500 technical listings describe the pump as a surface-mounted self-priming centrifugal pump, with a maximum suction height of approximately 3 m.
This feature can be useful when the pump is installed above the water level.
However, proper installation of the suction line remains important. The suction pipe should be appropriately sized, airtight and installed with minimal unnecessary bends and restrictions.
Noise & Operation
LEO describes the LSPA series as providing quiet operation, making it suitable for spa and residential applications where excessive pump noise is undesirable.
The pump is intended for continuous circulation operation when correctly installed within its rated operating conditions.
Advantages
- 500 W / 0.7 HP motor
- 220 V single-phase operation
- 10–210 L/min published flow range
- Up to approximately 12.6 m³/h based on 210 L/min
- 8 m maximum head
- Suitable for pool filtration
- Suitable for spa and jacuzzi systems
- Suitable for whirlpools
- Suitable for hydro-massage pools
- Suitable for clean-water circulation
- Engineering-plastic pump body
- AISI 304 stainless-steel shaft
- Built-in thermal protection
- IPX5 protection
- Maximum liquid temperature up to 50°C
- Compact dimensions
- Relatively lightweight at approximately 6.2 kg
- Quiet operation
- Suitable for small and medium-sized pool systems
LSPA Series Comparison
| Model | Power | Max. Flow* | Max. Head | Connection |
|---|---|---|---|---|
| LSPA-500 | 0.5 kW / 0.7 HP | 15 m³/h | 8 m | 40/40 mm |
| LSPA-600 | 0.6 kW | 16 m³/h | 10 m | 40/40 mm |
| LSPA-800 | 0.8 kW | 16 m³/h | 11 m | 40/40 mm |
| LSPA-900 | 0.9 kW | 16 m³/h | 12 m | 40/40 mm |
| LSPA-1100 | 1.1 kW | 17 m³/h | 12.5 m | 40/40 mm |
| LSPA-1300 | 1.3 kW | 18 m³/h | 13 m | 40/40 mm |
*The LEO-series table gives LSPA-500 a maximum flow of 15 m³/h, while the Malaysian distributor lists 10–210 L/min. These figures appear to come from different test/specification formats.
LSPA-500 vs XKP-804E
For product selection, the LSPA-500 is aimed more specifically at spa/whirlpool and smaller pool circulation, while the larger XKP range provides higher flow and head for more demanding swimming-pool systems.
| Feature | LSPA-500 | XKP-804E |
|---|---|---|
| Power | 0.5 kW | 0.8 kW |
| Voltage | 220 V | 220 V |
| Max. Flow | 10–210 L/min | 50–300 L/min |
| Max. Head | 8 m | 11 m |
| Connection | 1⅝" × 1⅝" | 2" × 2" |
| Typical Use | Spa / Jacuzzi / smaller pools | Larger pool circulation |
The Malaysian LEO pool-pump category lists both the LSPA-500 and XKP-804E as pool-pump products, while local product data shows the XKP-804E at 50–300 L/min and 11–1.5 m head.
Installation Considerations
For best performance, the LSPA-500 should be installed with properly sized suction and discharge piping.
Pay particular attention to:
- Correct suction-pipe diameter
- Minimising suction-side restrictions
- Airtight suction connections
- Correct pump priming
- Suitable pool filtration sizing
- Adequate ventilation around the motor
- Correct electrical protection
- Avoiding dry running
The pump is intended for clean water or liquids with physical and chemical characteristics similar to water.
Important Selection Note
The LEO LSPA-500 is a pool/spa circulation pump, not a general-purpose drainage or sewage pump.
It should be selected according to the actual filtration-system flow requirement and total dynamic head. The published 210 L/min maximum flow is a maximum-capacity figure and should not be expected when the system is operating against the full 8 m maximum head.
For a swimming pool, the correct pump size also depends on the pool volume, desired turnover time, filter capacity, pipe diameter and total piping length.
Technical Product Data
Brand: LEO
Model: LSPA-500
Category: Pool & Spa Pump
Pump Type: Surface-Mounted Pool/Spa Circulation Pump
Motor Power: 0.5 kW / 500 W / 0.7 HP
Voltage: 220 V
Frequency: 50 Hz
Phase: Single Phase
Flow Range: 10–210 L/min
Maximum Flow: Approx. 12.6 m³/h based on 210 L/min
Maximum Flow: 15 m³/h according to LEO-series catalogue data
Maximum Head: 8 m
Head Range: 8–2 m
Inlet: 1⅝"
Outlet: 1⅝"
Pump Body: Engineering Plastic
Shaft: AISI 304 Stainless Steel
Thermal Protection: Built-in
Insulation: Class F in LEO global documentation
Protection: IPX5
Maximum Liquid Temperature: 50°C
Dimensions: 343 × 162 × 187 mm
Weight: Approx. 6.2 kg
Applications: Swimming pools, spas, jacuzzis, whirlpools, hydro-massage pools and filtration systems.
SEO Product Title
LEO LSPA-500 0.5kW 0.7HP Pool & Spa Water Pump 220V 210L/Min 8M Head
SEO Product Description
LEO LSPA-500 0.5kW 0.7HP Pool & Spa Water Pump is a compact and reliable circulation pump designed for swimming pools, spas, jacuzzis, whirlpools, hydro-massage pools and clean-water filtration systems. Operating on 220V single phase, the LSPA-500 features a 500W / 0.7HP motor, published flow range of 10–210L/min and maximum head of 8 metres. It features an engineering-plastic pump body, AISI 304 stainless-steel shaft, built-in thermal protection and IPX5 protection, with a maximum liquid temperature of up to 50°C. The compact 343 × 162 × 187 mm design and approximately 6.2 kg weight make it suitable for residential pool and spa installations where dependable water circulation and filtration are required.
Inquiry - LEO POOL & SPA PUMPS - LSPA-500