B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO POOL & SPA PUMPS - XKP-350E-2



The LEO XKP-350E-2 is a compact 0.35 kW / 350 W / 0.5 HP swimming pool and spa circulation pump designed for water circulation and filtration in small domestic swimming pools. It uses an engineering-plastic pump body, an AISI 304 stainless-steel shaft, built-in thermal protection and IPX5 enclosure protection. The pump operates on 220 V single phase, 50 Hz and has 1½-inch suction and discharge connections.

The model is also commonly written as XKP350E2 or XKP-350-2 in distributor catalogues. These references correspond to the same 350 W / 0.5 HP XKP pool-pump family.

Product Description

The LEO XKP-350E-2 is designed to circulate swimming-pool water through a filtration system. Its integrated pump and strainer arrangement allows it to handle slightly dirty pool water containing suspended solids, making it suitable for normal swimming-pool circulation and filtration applications.

With a 350 W motor, the XKP-350E-2 provides a published flow range of approximately 17–132 L/min and a head range of 9–0.8 m in one technical specification. Malaysian distributor data also lists 12.5–125 L/min and 9–2 m, so actual performance should be selected using the pump curve and the installation's total dynamic head rather than the maximum flow figure alone.

Key Specifications

Specification LEO XKP-350E-2
Brand LEO
Model XKP-350E-2 / XKP350E2
Product Type Pool & Spa Circulation Pump
Application Swimming Pool / Spa / Filtration
Motor Power 0.35 kW / 350 W / 0.5 HP
Voltage 220 V
Frequency 50 Hz
Phase Single Phase
Published Flow Range 17–132 L/min
Alternate Distributor Flow Range 12.5–125 L/min
Maximum Flow Approx. 7.9 m³/h based on 132 L/min
Maximum Head 9 m
Published Head Range 9–0.8 m
Alternate Distributor Head Range 9–2 m
Maximum Suction Height 3.5 m
Suction / Discharge 1½" × 1½"
Pump Body Engineering Plastic
Shaft AISI 304 Stainless Steel
Motor Protection Built-in Thermal Protector
Insulation Class F in LEO XKP350E2 documentation
Protection Class IPX5
Medium Temperature 5–50°C
Maximum Ambient Temperature 40°C
Approx. Weight 6.3 kg
Package Dimensions Approx. 450 × 203 × 238 mm

Published specifications vary slightly between regional distributor listings, particularly for flow range, liquid-temperature limits and insulation class. The core specifications—350 W, 220 V, 1½" connections, approximately 9 m maximum head and around 125–132 L/min maximum flow—are consistent across the available sources.

Hydraulic Performance

The XKP-350E-2 has a maximum head of approximately 9 m. Published performance data gives a flow range reaching approximately 125–132 L/min at the low-head end.

This means:

  • Maximum head: approximately 9 m
  • Maximum flow: approximately 125–132 L/min
  • Maximum flow equivalent: approximately 7.5–7.9 m³/h
  • Maximum suction: approximately 3.5 m

The pump cannot provide maximum flow and maximum head simultaneously. As the filter, pipework, fittings and elevation create greater resistance, the operating flow rate decreases.

For pool installation, the actual operating point should be determined from the pump curve against the complete system's total dynamic head (TDH).

Pool Filtration Application

The XKP-350E-2 is primarily intended for water circulation with filtration in small domestic swimming pools.

A typical installation is:

Swimming Pool → Skimmer / Drain → Pump Strainer → XKP-350E-2 → Sand/Cartridge Filter → Return Line → Swimming Pool

The pump continuously circulates pool water through the filtration system, allowing suspended contaminants to be removed before the filtered water is returned to the pool.

Suitable Pool Size

One product specification lists the XKP350E-2 as suitable for pools of up to approximately 10 m³, depending on the required turnover rate and system resistance.

Actual suitable pool volume depends on:

  • Pool capacity
  • Required turnover time
  • Filter type and size
  • Pipe diameter
  • Pipe length
  • Number of elbows and fittings
  • Elevation difference
  • Filter pressure
  • Required circulation rate

Therefore, the 10 m³ figure should be treated as a general application reference rather than a universal maximum pool size.

Engineering-Plastic Pump Body

The XKP-350E-2 uses an engineering-plastic pump housing.

This construction provides:

  • Low pump weight
  • Corrosion resistance
  • Good suitability for chlorinated pool water
  • Durable external housing
  • Reduced maintenance requirements
  • Suitable construction for swimming-pool circulation

The engineering-plastic construction is specifically identified in LEO XKP350E2 product information.

AISI 304 Stainless-Steel Shaft

The pump uses an AISI 304 stainless-steel shaft, providing corrosion resistance for the intended clean-water and swimming-pool application.

This is an important feature in pool equipment because the pump may be exposed to treated water and moisture over extended operating periods.

Integrated Strainer

The XKP-350E-2 is a strainer-equipped pool pump.

The strainer helps prevent larger debris from reaching the pump's hydraulic components. This is useful for removing or retaining common pool debris before the water reaches the impeller.

The strainer should be inspected and cleaned regularly, particularly when the pool contains leaves, insects or other suspended debris.

Thermal Protection

The single-phase motor incorporates a built-in thermal protector.

This protection helps reduce the risk of motor damage caused by excessive temperature during abnormal operating conditions.

The pump should nevertheless be installed with appropriate electrical protection and operated according to the manufacturer's requirements.

IPX5 Protection

The motor enclosure is specified as IPX5.

This provides protection against water jets from various directions, making the pump suitable for the normal damp environment associated with pool-pump installations.

IPX5 does not mean the motor should be submerged. The pump is intended to be installed as a surface-mounted pool circulation pump.

Maximum Suction Height

Malaysian distributor specifications list a maximum suction height of approximately 3.5 m.

For reliable operation, the suction side should be designed carefully:

  • Keep the suction pipe as short as practical.
  • Use the appropriate pipe diameter.
  • Minimise unnecessary elbows.
  • Ensure all suction connections are airtight.
  • Avoid excessive restrictions.
  • Keep the pump adequately primed.

Poor suction-side installation can result in reduced flow, air ingress, noise and potential pump damage.

Temperature Range

Available XKP350E2 documentation lists a medium-temperature range of 5–50°C and an ambient temperature of ≤40°C.

Another product specification lists a maximum operating liquid temperature of 35°C.

Because regional technical data differs, the nameplate/manual supplied with the exact unit should take precedence for a specific installation.

For standard swimming-pool operation, the pump is normally used with water well below these maximum temperature limits.

Applications

The LEO XKP-350E-2 is suitable for:

  1. Small Domestic Swimming Pools
    Provides water circulation through the pool filtration system.
  2. Pool Filtration Systems
    Suitable for circulation through compatible sand or cartridge filters.
  3. Spa & Jacuzzi Systems
    Can be used for suitable clean-water circulation applications within its hydraulic limits.
  4. Residential Water Features
    Suitable for clean-water circulation where the required flow and head are within specifications.
  5. Small Pool Circulation Systems
    Suitable for installations requiring approximately 0.5 HP pump capacity.

LEO/distributor information specifically identifies the model for small domestic swimming pools and water circulation with filtration.

Advantages

  • 350 W / 0.5 HP motor
  • 220 V single-phase operation
  • Maximum head approximately 9 m
  • Maximum flow approximately 125–132 L/min
  • Approximately 7.5–7.9 m³/h maximum flow
  • 1½" suction and discharge connections
  • Engineering-plastic pump body
  • AISI 304 stainless-steel shaft
  • Built-in thermal protection
  • IPX5 motor protection
  • Integrated strainer
  • Suitable for slightly dirty pool water with suspended solids
  • Suitable for small domestic swimming pools
  • Suitable for pool filtration
  • Compact construction
  • Approx. 6.3 kg product weight
  • Maximum suction height approximately 3.5 m

XKP-350E-2 vs LSPA-500

Feature XKP-350E-2 LSPA-500
Motor Power 350 W / 0.5 HP 500 W / 0.7 HP
Voltage 220 V 220 V
Max. Head 9 m 8 m
Published Max. Flow 125–132 L/min 210 L/min
Connection 1½" × 1½" Approx. 1⅝" × 1⅝"
Body Engineering Plastic Engineering Plastic
Shaft AISI 304 SS AISI 304 SS
Strainer Integrated Application-dependent
Main Application Small pool filtration Spa / whirlpool / pool circulation

The XKP-350E-2 is the more compact 0.5 HP pool filtration pump, while the LSPA-500 is a larger 0.7 HP unit particularly associated with spa, whirlpool and hydro-massage applications.

Important Selection Note

The LEO XKP-350E-2 is designed for clean or slightly dirty pool water and filtration, not for sewage, abrasive slurry or heavily contaminated wastewater.

The maximum flow of approximately 125–132 L/min should not be used as the expected flow at the maximum 9 m head. For proper pump selection, calculate the system's total dynamic head, including:

  • Static elevation
  • Filter resistance
  • Suction-pipe losses
  • Discharge-pipe losses
  • Elbows
  • Valves
  • Fittings
  • Pool return fittings

The pump should then be selected based on the required flow at that operating head.

Technical Product Data

Brand: LEO
Model: XKP-350E-2 / XKP350E2
Category: Pool & Spa Pump
Pump Type: Swimming Pool Circulation & Filtration Pump
Motor Power: 0.35 kW / 350 W / 0.5 HP
Voltage: 220 V
Frequency: 50 Hz
Phase: Single Phase
Flow Range: 17–132 L/min
Alternative Published Flow: 12.5–125 L/min
Maximum Flow: Approx. 7.9 m³/h
Maximum Head: 9 m
Head Range: 9–0.8 m
Alternative Published Head Range: 9–2 m
Maximum Suction: 3.5 m
Inlet: 1½"
Outlet: 1½"
Pump Body: Engineering Plastic
Shaft: AISI 304 Stainless Steel
Motor Protection: Built-in Thermal Protector
Insulation: Class F in XKP350E2 documentation
Protection: IPX5
Medium Temperature: 5–50°C according to XKP350E2 listing
Maximum Ambient Temperature: ≤40°C
Weight: Approx. 6.3 kg
Applications: Small swimming pools, pool filtration, spa and clean-water circulation.

SEO Product Description

LEO XKP-350E-2 350W 0.5HP Pool & Spa Pump is a compact swimming-pool circulation and filtration pump designed for small domestic swimming pools, spas and clean-water circulation systems. Operating on 220V single phase, 50Hz, the pump features a 350W / 0.5HP motor, maximum head of approximately 9 metres and published flow capacity of approximately 125–132L/min, depending on the technical specification used. The XKP-350E-2 is equipped with an engineering-plastic pump body, AISI 304 stainless-steel shaft, integrated strainer, built-in thermal protector and IPX5 protection. Its 1½-inch suction and discharge connections make it suitable for compatible pool filtration pipework. Designed to circulate clean or slightly dirty pool water containing suspended solids, the LEO XKP-350E-2 is an excellent choice for small residential swimming pools, filtration systems, spas and other clean-water circulation applications.



 Inquiry - LEO POOL & SPA PUMPS - XKP-350E-2