The LEO XKP-1604E is a high-capacity 1.6 kW / 2.1 HP self-priming swimming pool and spa pump designed for water circulation and filtration in small and medium-sized swimming pools. It is part of LEO's XKP series of self-priming centrifugal pool pumps with integrated filtration/pre-filter arrangements. The pump is suitable for clean water and slightly dirty pool water containing suspended solids that can be captured by the filtration system.
The XKP-1604E operates on 220–230 V, 50 Hz single-phase power, provides a maximum flow of approximately 450 L/min (27 m³/h) and a maximum head of approximately 17 m. It has 2-inch suction and discharge connections and a maximum suction height of approximately 3.5 m.
Product Description
The LEO XKP-1604E is designed for high-volume circulation of swimming-pool water through filtration equipment. Its 1.6 kW / 2.1 HP motor provides substantially greater hydraulic capacity than smaller XKP models such as the XKP-804E.
The published performance range is approximately 25–450 L/min, with a head range of 17.1–3.6 m. LEO catalogue data also shows the hydraulic curve reaching approximately 27 m³/h at the low-head end, while the nominal operating point is considerably lower than the maximum flow.
Key Specifications
| Specification | LEO XKP-1604E |
|---|---|
| Brand | LEO |
| Model | XKP-1604E / XKP1604E |
| Product Type | Pool & Spa Pump |
| Pump Type | Self-Priming Centrifugal Pool Pump |
| Motor Power | 1.6 kW / 1600 W / 2.1 HP |
| Voltage | 220–230 V |
| Frequency | 50 Hz |
| Phase | Single Phase |
| Flow Range | 25–450 L/min |
| Maximum Flow | 450 L/min |
| Maximum Flow | 27 m³/h |
| Head Range | 17.1–3.6 m |
| Maximum Head | Approx. 17 m |
| Maximum Suction Height | 3.5 m |
| Inlet | 2" / 50 mm |
| Outlet | 2" / 50 mm |
| Pump Body | Engineering Plastic |
| Impeller | Plastic |
| Shaft | AISI 304 Stainless Steel |
| Motor Winding | Copper |
| Bearing | C&U |
| Thermal Protection | Built-in |
| Insulation Class | F in LEO technical documentation |
| Protection Class | IPX5 |
| Maximum Liquid Temperature | 35°C |
| Maximum Ambient Temperature | 40°C |
| Approx. Product Weight | 15.7–16.5 kg depending on listing |
| Maximum Suspended Solids | Approx. 0.1% in one technical specification |
| Maximum Particle Size | Approx. 0.2 mm in one technical specification |
Malaysian distributor and LEO catalogue information consistently confirms the core specifications of 1.6 kW, 2.1 HP, 220 V, 25–450 L/min, 17.1–3.6 m head, 3.5 m maximum suction and 2" × 2" connections.
Hydraulic Performance
The XKP-1604E has a maximum hydraulic capacity of approximately:
450 L/min
This is equivalent to:
27,000 L/h
or:
27 m³/h
The pump's published head range is approximately 17.1–3.6 m.
The hydraulic performance curve indicates that the pump does not deliver 450 L/min at 17 m head. As system resistance increases, the available flow decreases.
Representative points from the published XKP-1604E pump curve include approximately:
| Flow | Approx. Head |
|---|---|
| 0 m³/h | 17 m |
| 6 m³/h | 16.3 m |
| 9 m³/h | 15.5 m |
| 12 m³/h | 14.5 m |
| 15 m³/h | 13.5 m |
| 18 m³/h | 12 m |
| 21 m³/h | 9.6 m |
| 24 m³/h | 7 m |
| 27 m³/h | 3.5 m |
These values are based on the published XKP hydraulic performance curve.
This information is important when selecting the pump for a particular swimming-pool system because the actual operating point depends on the total dynamic head (TDH).
Self-Priming Design
The XKP-1604E is a self-priming centrifugal pool pump.
Its maximum specified suction height is approximately 3.5 m.
This makes it suitable for surface-mounted installations where the pump is positioned above the pool water level.
For reliable suction performance:
- Keep the suction pipe as short as practical.
- Use the correct 2-inch pipe size.
- Minimise unnecessary elbows and restrictions.
- Ensure suction connections are completely airtight.
- Properly prime the pump before operation.
- Keep the strainer basket clean.
- Avoid dry running.
Self-priming capability does not eliminate the need for correct suction-pipe design.
Integrated Filtration / Pre-Filter
The XKP series is designed as a self-priming centrifugal pump with filter. It is intended to circulate pool water through filtration systems and can handle slightly dirty water containing suspended solids that can be filtered.
A typical installation is:
Swimming Pool → Skimmer / Main Drain → Pump Pre-Filter → XKP-1604E → Sand/Cartridge Filter → Return Line → Swimming Pool
The pre-filter helps prevent larger debris from entering the pump hydraulic assembly.
Regular cleaning is important because a blocked basket increases suction resistance and can reduce pump flow.
Swimming Pool Applications
The XKP-1604E is suitable for:
- Residential swimming pools
- Medium-sized swimming pools
- Large domestic pool filtration systems
- Spa water circulation
- Pool filtration systems
- Water-treatment systems
- Landscape fountains
- Decorative water features
- Clean-water circulation
- Light industrial clean-water applications
LEO/distributor information specifically identifies the XKP series for water circulation with filtration in small and medium-sized swimming pools, as well as water treatment, landscape fountains and light industrial applications.
High-Flow Pool Circulation
The XKP-1604E is particularly useful where a pool filtration system requires a relatively high circulation rate.
Its maximum flow of approximately 450 L/min / 27 m³/h provides substantially greater capacity than the XKP-804E.
For example:
- XKP-804E: up to approximately 290 L/min
- XKP-1604E: up to approximately 450 L/min
The higher capacity makes the XKP-1604E appropriate for larger filtration equipment and installations with higher required circulation rates, provided the filter and pipework are also appropriately sized.
Engineering-Plastic Pump Body
The XKP-1604E uses a special engineering-plastic pump body.
Benefits include:
- Corrosion resistance
- Lightweight construction compared with cast-metal pool pumps
- Good compatibility with treated swimming-pool water
- Durable housing
- Reduced external corrosion
The pump is intended for water and liquids with physical and chemical characteristics similar to water.
AISI 304 Stainless-Steel Shaft
The hydraulic assembly uses an AISI 304 stainless-steel shaft.
This provides corrosion resistance for normal swimming-pool and clean-water applications.
The combination of an engineering-plastic pump body and stainless-steel shaft provides a durable construction suitable for prolonged pool circulation.
Plastic Impeller
The pump uses a plastic impeller/rotor.
The engineering-plastic hydraulic components are appropriate for the intended clean-water and treated-pool-water application and help keep the pump relatively lightweight.
Motor Construction
The XKP-1604E motor is specified with:
- 1.6 kW power
- 2.1 HP rating
- Single-phase operation
- Copper motor winding
- C&U bearing
- Built-in thermal protector
- Class F insulation
- IPX5 protection
The built-in thermal protector helps protect the single-phase motor against overheating under abnormal operating conditions.
IPX5 Protection
The motor is specified with IPX5 protection.
This provides protection against water jets from various directions, which is appropriate for the damp operating environment around swimming-pool equipment.
The motor should nevertheless be installed in a suitable dry, ventilated location and should not be submerged.
Maximum Liquid Temperature
The XKP-1604E is specified with a maximum liquid temperature of approximately:
35°C
and a maximum ambient temperature of approximately:
40°C.
This makes it suitable for conventional swimming-pool water circulation.
For hot-spa applications, the actual water temperature should be verified against the manufacturer's permitted operating conditions before installation.
2-Inch Suction & Discharge
The XKP-1604E uses:
2" × 2" inlet/outlet
or approximately:
50 mm × 50 mm
connections.
The 2-inch connection size is appropriate for the pump's high flow capacity.
Undersized suction or discharge piping can introduce excessive friction losses, reducing the actual flow and potentially affecting pump performance.
Pool Filtration System
The XKP-1604E is suitable for use with compatible:
- Sand filters
- Cartridge filters
- Pool skimmers
- Main-drain systems
- Pool return systems
- Automatic pool-cleaning systems
The filter should be sized to accommodate the pump's actual operating flow.
A filter that is too small can create excessive pressure loss and may prevent the pump from operating at its intended duty point.
Advantages
- 1.6 kW / 1600 W / 2.1 HP motor
- 220–230 V, 50 Hz
- Maximum flow of 450 L/min
- Maximum flow equivalent to 27 m³/h
- Maximum head approximately 17 m
- Published hydraulic range 25–450 L/min
- Published head range 17.1–3.6 m
- 3.5 m maximum suction
- 2" × 2" connections
- Self-priming centrifugal design
- Integrated filtration/pre-filter system
- Engineering-plastic pump body
- Plastic impeller
- AISI 304 stainless-steel shaft
- Copper motor winding
- C&U bearing
- Built-in thermal protector
- Class F insulation
- IPX5 protection
- Maximum liquid temperature approximately 35°C
- Suitable for small and medium-sized swimming pools
- Suitable for high-flow pool filtration
- Suitable for water-treatment systems
- Suitable for landscape fountains
- Suitable for clean-water circulation
XKP-1604E vs XKP-804E
| Feature | XKP-1604E | XKP-804E |
|---|---|---|
| Motor Power | 1.6 kW / 2.1 HP | 0.8 kW / 1.1 HP |
| Voltage | 220–230 V | 220 V |
| Max. Flow | 450 L/min | 290 L/min |
| Max. Flow | 27 m³/h | 17.4 m³/h |
| Max. Head | 17 m | 11 m |
| Max. Suction | 3.5 m | 3.5 m |
| Inlet / Outlet | 2" × 2" | 2" × 2" |
| Pump Type | Self-priming centrifugal | Self-priming centrifugal |
| Pump Body | Engineering Plastic | Engineering Plastic |
| Shaft | AISI 304 SS | AISI 304 SS |
| Thermal Protection | Yes | Yes |
| Protection | IPX5 | IPX5 |
| Typical Application | Higher-flow pool filtration | Medium-flow pool filtration |
The XKP-1604E provides significantly greater flow and head capability than the XKP-804E, making it appropriate for installations with higher circulation requirements.
XKP Series Positioning
The XKP-1604E sits toward the higher-capacity end of the LEO XKP pool-pump range.
The LEO catalogue lists:
| Model | Power | Maximum Head | Maximum Flow |
|---|---|---|---|
| XKP-804E | 0.8 kW | 11 m | Approx. 18 m³/h |
| XKP-904E | 0.9 kW | 14 m | Approx. 21 m³/h |
| XKP-1104E | 1.1 kW | 15 m | Approx. 21 m³/h |
| XKP-1604E | 1.6 kW | 17 m | 27 m³/h |
| XKP-2204E | 2.2 kW | 18 m | 30 m³/h |
The published XKP hydraulic table confirms the XKP-1604E at 1.6 kW, with performance extending to approximately 27 m³/h, while the XKP-2204E is rated at 2.2 kW and up to approximately 30 m³/h.
Important Selection Note
The LEO XKP-1604E is a pool circulation and filtration pump, not a sewage, drainage or abrasive-slurry pump.
Its 450 L/min / 27 m³/h maximum flow is a maximum-capacity figure and should not be interpreted as the expected flow under normal high-head operation.
For correct selection, calculate the complete system's total dynamic head, including:
- Pool elevation
- Suction-pipe friction
- Discharge-pipe friction
- Filter resistance
- Valves
- Elbows
- Skimmer resistance
- Return fittings
- Other hydraulic restrictions
Then select the pump's operating point from the hydraulic curve.
For a high-flow pump such as the XKP-1604E, the filtration equipment and pipework should also be adequately sized to handle the intended flow.
Technical Product Data
Brand: LEO
Model: XKP-1604E / XKP1604E
Category: Pool & Spa Pump
Pump Type: Self-Priming Centrifugal Pool Pump with Filter
Motor Power: 1.6 kW / 1600 W / 2.1 HP
Voltage: 220–230 V
Frequency: 50 Hz
Phase: Single Phase
Flow Range: 25–450 L/min
Maximum Flow: 450 L/min
Maximum Flow: 27 m³/h
Head Range: 17.1–3.6 m
Maximum Head: Approx. 17 m
Maximum Suction: 3.5 m
Inlet: 2" / 50 mm
Outlet: 2" / 50 mm
Pump Body: Engineering Plastic
Impeller: Plastic
Shaft: AISI 304 Stainless Steel
Motor Winding: Copper
Bearing: C&U
Thermal Protection: Built-in
Insulation Class: F
Protection Class: IPX5
Maximum Liquid Temperature: 35°C
Maximum Ambient Temperature: 40°C
Approx. Weight: 15.7–16.5 kg depending on packaging/listing
Applications: Swimming pools, pool filtration, spas, water-treatment systems, landscape fountains and clean-water circulation.
Inquiry - LEO POOL & SPA PUMPS - XKP-1604E