B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO POOL PUMP FILTERS - DUKE 5800



The LEO DUKE 5800 is a 75-litre swimming pool sand filter system designed for swimming-pool water filtration, particularly for residential and medium-sized pool installations. It uses a 485 mm diameter HDPE filter tank, a 7-way multiport valve, pressure gauge and a 6-finger/lateral filtration system. Malaysian LEO distributor information specifies compatibility with LEO XKP-804E and XKP-1104E pool pumps, with 50 mm inlet/outlet connections.

The DUKE 5800 is also documented with an 800 W / 1.0 HP pump flow reference of 19,000 L/h, while the filtration flow is approximately 14,570 L/h when using sand and 16,400 L/h when using Aqualoon filter balls.

Product Description

The LEO DUKE 5800 is a compact, high-capacity pool filtration tank designed to remove suspended dirt and impurities from swimming-pool water.

The system uses a bed of filter sand or compatible filter balls through which pool water passes. Contaminants are trapped within the filtration medium, while cleaner water is returned to the swimming pool.

Its 7-way valve provides multiple operating functions for filtration, backwashing, rinsing, draining and other maintenance operations. The system also incorporates a pressure gauge so the operator can monitor filter pressure and determine when backwashing or cleaning is required.

The DUKE 5800 is specified for use with fresh or salt water in swimming pools and is also listed for applications such as jacuzzis, water parks, aquaculture and agricultural irrigation.

Key Specifications

Specification LEO DUKE 5800
Brand LEO
Model DUKE 5800
Product Type Pool Sand Filter
Series DUKE
Filter Tank Volume 75 L
Tank Diameter 485 mm
Tank Height 840 mm
Tank Material HDPE / Engineering Plastic
Valve 7-Way Multiport Valve
Filtration System 6-Finger / Lateral System
Recommended Sand 60 kg total
Fine Sand Approx. 30 kg
Coarse Sand Approx. 30 kg
Pump Compatibility LEO XKP-804E / XKP-1104E
Recommended Pump Power ≥0.8 kW
Pump Flow Reference 19,000 L/h
Filtration Flow with Sand 14,570 L/h
Filtration Flow with Aqualoon 16,400 L/h
Aqualoon Capacity Approx. 2,100 g
Inlet / Outlet 50 mm
Alternative Connection 1½" / DN40, depending on fitting configuration
Maximum Working Pressure 1.5 bar
Maximum Liquid Temperature 35°C
Pressure Gauge Included
Base Plate Included
Connecting Hose Included
Multiport Valve Included

The Malaysian LEO listing gives 75 L tank volume, 485 mm diameter, 840 mm height, ≥0.8 kW pump compatibility and 50 mm connections. It also specifies a 7-way valve, connecting hose, pressure gauge, base plate, six-finger filtration system and HDPE tank.

Filter Tank

The DUKE 5800 uses a 75-litre filter tank with an approximate 485 mm diameter and 840 mm height.

The tank provides the chamber in which the filtration medium is installed.

The relatively large internal filtration area allows the system to process a substantial quantity of pool water while trapping suspended contaminants in the sand bed.

The tank is constructed from HDPE/engineering plastic, providing resistance against corrosion and the damp environment normally associated with swimming-pool equipment.

Recommended Filter Media

The DUKE 5800 can be operated using conventional pool filter sand.

The Malaysian distributor recommends approximately:

  • 30 kg fine sand
  • 30 kg coarse sand
  • 60 kg total

for the 75-litre tank.

The manufacturer information for the DUKE 5800 also specifies approximately 75 kg sand volume in another configuration.

Because published sand quantities vary between configurations and markets, the installation manual/nameplate supplied with the actual DUKE 5800 should be followed for the final quantity and grain specification.

Aqualoon Filter Ball Compatibility

The DUKE 5800 can also be used with Aqualoon filter balls as an alternative filtration medium. The manufacturer specifies approximately 2,100 g of Aqualoon for the DUKE 5800.

The published filtration performance is:

Sand: approximately 14,570 L/h

Aqualoon: approximately 16,400 L/h.

This gives users flexibility between traditional sand filtration and lightweight filter-ball media.

7-Way Multiport Valve

One of the main features of the DUKE 5800 is its 7-way multiport valve.

The valve allows the filtration system to be configured for different operating and maintenance functions.

Typical functions include:

  1. Filter – normal pool-water filtration.
  2. Backwash – reverses water flow through the filter media to clean accumulated dirt.
  3. Rinse – flushes the filter after backwashing.
  4. Waste/Drain – directs water away from the pool.
  5. Recirculate – circulates water without passing through the filter bed.
  6. Closed – shuts off water flow through the filter.
  7. Winter/auxiliary position – depending on the specific valve configuration.

The exact markings on the valve supplied with the unit should be followed because valve configurations can vary.

Filtration Flow Rate

The DUKE 5800 is associated with a pump flow of approximately:

19,000 L/h

or:

19 m³/h

However, the filtration flow is lower once the filter media is installed.

Published figures are approximately:

14,570 L/h with sand

and

16,400 L/h with Aqualoon.

This distinction is important when matching the filter to a swimming-pool pump.

Compatible LEO Pumps

The Malaysian LEO distributor specifically lists the DUKE 5800 with:

  • LEO XKP-804E
  • LEO XKP-1104E

and recommends a pump power of at least 0.8 kW.

This is particularly relevant because the XKP-804E has a considerably higher maximum pump flow than the DUKE 5800's practical sand-filtration flow. The pump should therefore be operated at an appropriate duty point rather than assuming its maximum free-flow rating.

50 mm Connections

The Malaysian DUKE 5800 listing specifies 50 mm inlet/outlet connections.

Some LEO DUKE 5800 documentation and international listings also specify 1½-inch / DN40 connection arrangements, depending on the supplied fittings.

Therefore, when purchasing replacement fittings or connecting the filter to an existing pool system, the actual connection fittings supplied with the unit should be checked.

Pressure Gauge

A pressure gauge is included with the DUKE 5800.

The gauge allows the operator to monitor the pressure inside the filtration system.

As the sand becomes progressively loaded with dirt, filter resistance increases and pressure normally rises.

A significant pressure increase compared with the clean-filter reading is an indication that backwashing may be required.

It is useful to record the pressure when the filter is clean so that subsequent pressure increases can be compared against the normal operating value.

Backwashing

Backwashing is an important maintenance operation for a sand-filter system.

During normal filtration, dirt accumulates in the sand bed. When the pressure rises sufficiently, the multiport valve can be switched to BACKWASH to reverse the water flow through the filter.

The contaminated water is then discharged rather than returned to the pool.

After backwashing, the valve should normally be switched to RINSE to settle and clean the sand bed before returning the system to FILTER mode.

The pump should always be switched off before changing the multiport valve position.

Typical Installation

A typical DUKE 5800 pool filtration arrangement is:

Swimming Pool → Skimmer / Main Drain → Pool Pump → DUKE 5800 Filter → Return Line → Swimming Pool

The pump draws water from the pool and sends it into the filter vessel.

Water passes through the sand or filter-ball medium, where suspended contaminants are captured.

Filtered water exits through the multiport valve and returns to the pool.

Suitable Applications

The DUKE 5800 is suitable for:

  • Residential swimming pools
  • Above-ground swimming pools
  • In-ground swimming pools
  • Pool filtration systems
  • Jacuzzi systems
  • Spa water circulation
  • Water parks
  • Aquaculture applications
  • Clean-water filtration
  • Agricultural water applications

LEO-related documentation specifically identifies the DUKE 5800 for fresh and seawater filtration in swimming pools, jacuzzis, water parks, aquaculture and agricultural irrigation.

Advantages

  • 75 L filter tank
  • 485 mm tank diameter
  • Approx. 840 mm tank height
  • HDPE/engineering-plastic tank
  • 7-way multiport valve
  • 6-finger/lateral filtration system
  • Pressure gauge included
  • Connecting hose included
  • Base plate included
  • Compatible with filter sand
  • Compatible with Aqualoon filter balls
  • Approx. 14,570 L/h sand filtration flow
  • Approx. 16,400 L/h Aqualoon filtration flow
  • 50 mm connection configuration
  • Maximum working pressure approximately 1.5 bar
  • Maximum liquid temperature approximately 35°C
  • Compatible with LEO XKP-804E and XKP-1104E
  • Suitable for residential and medium-sized pool filtration
  • Corrosion-resistant plastic filter vessel

DUKE 5800 vs Larger DUKE 51100

Feature DUKE 5800 DUKE 51100
Tank Volume 75 L 75 L*
Tank Diameter 485 mm 485 mm*
Tank Height 840 mm 840 mm*
Recommended Pump ≥0.8 kW Higher-capacity configuration
Compatible Pump XKP-804E / XKP-1104E Larger system configuration
Connection 50 mm 50 mm*
Application Residential / medium pool Higher-capacity configuration

*Specifications can vary according to the specific DUKE configuration and supplied fittings. The Malaysian distributor groups DUKE 5800 and DUKE 51100 in its 75 L/485 mm/840 mm filter listing.

Important Installation Notes

The filter should be installed on a stable, level base with adequate clearance around the tank and multiport valve for maintenance.

The filter system should be installed according to the manufacturer's flow direction and plumbing requirements.

Before initial operation:

  • Fill the filter with the specified filtration medium.
  • Ensure all connections are properly sealed.
  • Check the multiport valve position.
  • Ensure the pump is correctly primed.
  • Check for leaks.
  • Perform the initial backwash and rinse procedure where required.
  • Then switch the system to FILTER mode.

Never operate the pump against a closed valve unless the system is specifically designed for that operating condition.

Technical Product Data

Brand: LEO
Model: DUKE 5800
Category: Pool Pump Filter / Swimming Pool Sand Filter
Series: DUKE
Filter Tank Volume: 75 L
Tank Diameter: 485 mm
Tank Height: 840 mm
Tank Material: HDPE / Engineering Plastic
Valve: 7-Way Multiport Valve
Filtration System: 6-Finger/Lateral
Recommended Pump Power: ≥0.8 kW
Compatible Pump Models: XKP-804E / XKP-1104E
Pump Flow Reference: 19,000 L/h
Sand Filtration Flow: 14,570 L/h
Aqualoon Filtration Flow: 16,400 L/h
Aqualoon Capacity: 2,100 g
Recommended Sand: Approx. 60 kg according to Malaysian distributor specification
Inlet / Outlet: 50 mm
Alternative Fitting Specification: 1½" / DN40 depending on supplied configuration
Maximum Working Pressure: 1.5 bar
Maximum Liquid Temperature: 35°C
Pressure Gauge: Included
Connecting Hose: Included
Base Plate: Included
Applications: Swimming pools, spas, jacuzzis, water parks, aquaculture and clean-water filtration.



 Inquiry - LEO POOL PUMP FILTERS - DUKE 5800