The LEO LGP20-A is a heavy-duty 2-inch gasoline engine water pump designed for clean-water transfer, agricultural irrigation, drainage and general water-supply applications where electrical power is unavailable or inconvenient. It uses a 163 cc, single-cylinder, 4-stroke, air-cooled gasoline engine rated at 5.5 HP, driving a centrifugal pump with 50 mm (2") inlet and outlet connections.
The pump delivers a maximum flow of approximately 30 m³/h (500 L/min) and a maximum head of approximately 32 m according to LEO's current product information. The published hydraulic curve shows approximately 29.1 m head at 5 m³/h, 25.2 m at 10 m³/h, 21.5 m at 15 m³/h, 16.5 m at 20 m³/h, 11.3 m at 25 m³/h and 6.5 m at 30 m³/h.
Product Description
The LEO LGP20-A Petrol Engine Pump is a portable, engine-driven centrifugal pump intended for applications requiring relatively high water flow without dependence on an electrical supply.
Its 5.5 HP 4-stroke gasoline engine provides the driving power for the pump, while the reinforced pump body, cast-iron impeller and diffuser are designed for durability in regular water-transfer applications. The unit features a compact steel frame and a multi-directional outlet arrangement for flexible hose routing.
It is designed primarily for clean water or liquids with similar physical and chemical properties, with a permitted liquid temperature range of 0°C to 40°C.
Key Specifications
| Specification | LEO LGP20-A |
|---|---|
| Brand | LEO |
| Model | LGP20-A |
| Product Type | Gasoline Engine Water Pump |
| Pump Type | Centrifugal |
| Engine Type | Single-Cylinder, 4-Stroke, Air-Cooled |
| Engine Model | G160-A |
| Engine Displacement | 163 cc |
| Maximum Engine Power | 5.5 HP |
| Approx. Rated Power | 4.1 kW |
| Rated Speed | 3,600 rpm |
| Maximum Flow | 30 m³/h / 500 L/min |
| Maximum Head | Approx. 32 m |
| Maximum Suction | 8 m |
| Inlet | 2" / 50 mm |
| Outlet | 2" / 50 mm |
| Fuel Tank Capacity | 2.8 L |
| Fuel Type | Unleaded gasoline, 90 octane or higher |
| Cooling | Air-cooled |
| Impeller | Anti-rust cast iron |
| Diffuser | Anti-rust cast iron |
| Mechanical Seal | Carbon / Ceramic |
| Pump Body | Aluminium |
| Frame | Steel |
| Liquid Temperature | 0°C–40°C |
| Approx. Net Weight | 21.5 kg |
| Package Size | Approx. 470 × 412 × 432 mm |
The LEO product documentation confirms the 163 cc engine, 5.5 HP output, 3,600 rpm speed, 2" connections, 30 m³/h maximum flow and 32 m maximum head.
5.5 HP 4-Stroke Engine
The LGP20-A is powered by a single-cylinder, 4-stroke, air-cooled gasoline engine.
Key engine characteristics include:
- 163 cc displacement
- 5.5 HP maximum power
- 3,600 rpm rated speed
- Low-fuel-consumption design
- Air-cooled operation
- Low-engine-oil shutdown protection on specified versions
The 4-stroke configuration eliminates the need for premixing gasoline and 2-stroke oil. The engine uses conventional gasoline and separate engine lubrication.
2-Inch Inlet and Outlet
The LGP20-A uses:
2" × 2" / 50 mm × 50 mm inlet and outlet
This relatively large hydraulic connection allows the pump to handle a substantially higher volume of water than smaller 1-inch engine pumps such as the LGP10.
For high-flow applications, the suction pipe should be kept as short and straight as practical and should be properly sealed to prevent air entering the pump.
Maximum Flow
The maximum rated flow is approximately:
30 m³/h
or:
500 L/min
or:
8.33 L/s.
However, the maximum flow occurs at relatively low system head. It should not be assumed that the pump will deliver 30 m³/h when pumping to a high elevation or through a long pipe system.
Hydraulic Performance
The LGP20-A hydraulic curve provides a useful indication of the relationship between flow and head:
| Flow | Approx. Head |
|---|---|
| 0 m³/h | 32 m |
| 5 m³/h | 29.1 m |
| 10 m³/h | 25.2 m |
| 15 m³/h | 21.5 m |
| 20 m³/h | 16.5 m |
| 25 m³/h | 11.3 m |
| 30 m³/h | 6.5 m |
These figures illustrate an important point: higher flow results in lower available head.
For actual system selection, the pump should be evaluated at the required operating point based on total dynamic head.
Maximum Head
The LGP20-A is rated at approximately:
32 m maximum head.
Maximum head represents the approximate shut-off head and is not the same as the vertical height the pump can deliver while maintaining its maximum 30 m³/h flow.
For example, at approximately 20 m³/h, the published curve indicates around 16.5 m head, while approximately 30 m³/h corresponds to only around 6.5 m head.
Maximum Suction
The LGP20-A is specified with a maximum suction capability of approximately:
8 m
Some LEO documentation also specifies a priming performance of approximately 5 m suction with a priming time below 120 seconds under the stated test conditions.
Actual suction performance depends on:
- Suction lift
- Suction-pipe diameter
- Suction-pipe length
- Foot-valve condition
- Air leakage
- Water temperature
- Pump priming
- Pipe fittings
The suction line should be airtight and correctly sized.
Reinforced Pump Body
The LGP20-A uses a reinforced pump body designed to improve durability and reliability during repeated operation. The pump body is aluminium, while the impeller and diffuser are specified as anti-rust cast iron in the current product documentation.
This combination provides a balance between structural strength, corrosion resistance and manageable overall equipment weight.
Anti-Rust Cast-Iron Impeller and Diffuser
The hydraulic assembly uses:
- Anti-rust cast-iron impeller
- Anti-rust cast-iron diffuser
These components are designed to withstand normal clean-water pumping conditions while maintaining the hydraulic geometry required for efficient centrifugal pumping.
The pump is not intended for heavily abrasive water, sewage, sludge or liquids containing large quantities of solids.
Mechanical Seal
The LGP20-A uses a carbon/ceramic mechanical seal.
The mechanical seal helps prevent water from entering the engine/pump-drive area and reduces leakage around the rotating shaft. LEO specifically highlights the use of a special mechanical seal for improved sealing performance.
5-Direction Adjustable Outlet
The LGP20-A incorporates a 5-direction adjustable outlet.
This allows the discharge arrangement to be configured according to the direction required by the hose or pipe installation. It is particularly useful for temporary irrigation and water-transfer installations where the pump may be relocated.
Fuel Tank
The LGP20-A has a fuel tank capacity of approximately:
2.8 litres.
The engine uses unleaded gasoline rated 90 octane or higher, according to LEO's engine-pump documentation.
Because the LGP20-A is a 4-stroke engine, gasoline and engine oil are kept separate.
Low Oil Protection
The LGP20-A is specified in current Malaysian product information with a low-engine-oil shutdown system.
This feature helps protect the engine from operating under insufficient lubrication conditions by stopping the engine when the oil level falls below the protection threshold.
Portable Frame
The engine and pump assembly are mounted on a steel frame, providing a stable platform for operation and allowing the pump to be transported between temporary water-transfer locations.
Approximate package dimensions are:
470 × 412 × 432 mm
with a listed gross weight around 21.5 kg in LEO's product documentation.
Applications
The LEO LGP20-A is suitable for:
- Agricultural irrigation
- Farm irrigation
- Garden irrigation
- Construction-site water transfer
- Water tank filling
- General water transfer
- Factory water supply
- Factory drainage
- Mine water supply/drainage
- Municipal water applications
- Temporary water supply
- General clean-water pumping
LEO specifically identifies applications including water supply and drainage for factories, mines and municipal facilities, as well as field irrigation.
Suitable Liquid
The LGP20-A is intended for:
Clean water or liquids with similar physical and chemical properties.
Recommended liquid temperature:
0°C to 40°C.
It should not be treated as a sewage, sludge, slurry or solids-handling pump.
Main Advantages
- 5.5 HP gasoline engine
- 163 cc 4-stroke engine
- Air-cooled design
- 2" / 50 mm inlet and outlet
- Maximum flow up to 30 m³/h
- Maximum flow up to 500 L/min
- Maximum head approximately 32 m
- Maximum suction approximately 8 m
- 2.8 L fuel tank
- Anti-rust cast-iron impeller
- Anti-rust cast-iron diffuser
- Aluminium pump body
- Carbon/ceramic mechanical seal
- Reinforced pump construction
- Low-fuel-consumption engine
- Low-oil shutdown protection
- 5-direction adjustable outlet
- Portable steel frame
- Suitable for agricultural and general clean-water transfer
LGP20-A vs LGP10
| Feature | LGP20-A | LGP10 |
|---|---|---|
| Engine | 4-Stroke | 2-Stroke |
| Displacement | 163 cc | 42.7 cc |
| Power | 5.5 HP | 1.6 HP |
| Rated Speed | 3,600 rpm | 7,500 rpm |
| Inlet / Outlet | 2" / 50 mm | 1" / 25 mm |
| Max Flow | 30 m³/h | 6 m³/h |
| Max Head | 32 m | 35 m |
| Max Suction | 8 m | 8 m |
| Fuel Tank | 2.8 L | 1.0 L |
| Engine Type | 4-Stroke | 2-Stroke |
| Main Advantage | Higher water volume | Compact/lightweight |
The LGP20-A is therefore a substantially higher-capacity pump than the LGP10, particularly for applications where high water volume and 2-inch pipework are required.
Important Performance Consideration
The 30 m³/h maximum flow should not be used as the expected operating flow in every installation.
For example, the published LGP20-A curve indicates:
10 m³/h → approximately 25.2 m head
20 m³/h → approximately 16.5 m head
30 m³/h → approximately 6.5 m head.
The actual flow is determined by the intersection of the pump curve and the system curve.
The system curve is affected by:
- Static head
- Suction lift
- Pipe length
- Pipe diameter
- Pipe friction
- Elbows
- Valves
- Filters
- Foot valves
- Discharge fittings
- Elevation changes
For accurate pump selection, calculate the total dynamic head and select the operating point accordingly.
Maintenance
For reliable operation:
- Check engine oil before starting.
- Use the specified gasoline.
- Prime the pump before operation.
- Do not run the pump dry.
- Keep the suction line airtight.
- Use an appropriate suction strainer/foot valve.
- Keep the suction strainer clean.
- Inspect the impeller and diffuser periodically.
- Check the mechanical seal for leakage.
- Keep the engine air filter clean.
- Maintain the cooling-air passages.
- Check the fuel system regularly.
- Drain fuel before long-term storage when recommended.
- Follow the engine maintenance schedule.
- Switch the engine off before carrying out pump maintenance.
Technical Product Data
Brand: LEO
Model: LGP20-A
Category: Gasoline Engine Pump / Petrol Water Pump
Pump Type: Centrifugal
Engine: G160-A
Engine Type: Single-cylinder, 4-stroke, air-cooled
Displacement: 163 cc
Maximum Power: 5.5 HP
Rated Speed: 3,600 rpm
Maximum Flow: 30 m³/h / 500 L/min
Maximum Head: Approx. 32 m
Maximum Suction: 8 m
Inlet: 2" / 50 mm
Outlet: 2" / 50 mm
Fuel Tank: 2.8 L
Fuel: Unleaded gasoline, 90 octane or higher
Impeller: Anti-rust cast iron
Diffuser: Anti-rust cast iron
Pump Body: Aluminium
Mechanical Seal: Carbon / Ceramic
Frame: Steel
Cooling: Air-cooled
Liquid: Clean water
Liquid Temperature: 0°C–40°C
Approx. Weight: 21.5 kg
Package Size: Approx. 470 × 412 × 432 mm.
Inquiry - LEO GASOLINE ENGINE PUMPS - LGP 20-A