The LEO LGP30-A is a high-capacity 3-inch gasoline engine water pump designed for transferring large volumes of clean water in locations where electrical power is unavailable or impractical. It is powered by a 6.5 HP, 196 cc, single-cylinder, 4-stroke, air-cooled gasoline engine and uses 3-inch (75 mm) inlet and outlet connections. LEO specifies a maximum flow of approximately 60 m³/h (1,000 L/min) and maximum head of approximately 32 m.
The LGP30-A is particularly suitable for agricultural irrigation, water transfer, factory drainage, mining applications, municipal works, construction sites and general clean-water pumping. LEO describes the pump as having a high-efficiency hydraulic system, low fuel consumption, durable construction and a specialized mechanical seal.
Product Description
The LEO LGP30-A Gasoline Engine Pump combines a 4-stroke petrol engine and centrifugal pump into a portable engine-driven pumping unit. The gasoline engine provides independent operation without requiring a mains electrical connection, making it suitable for farms, construction sites and temporary water-transfer locations.
Its 3-inch hydraulic connections allow substantially greater water throughput than the LGP20-A 2-inch model. The pump is designed primarily for clean water and similar liquids, with a specified liquid-temperature range of 0°C to 40°C.
Key Specifications
| Specification | LEO LGP30-A |
|---|---|
| Brand | LEO |
| Model | LGP30-A |
| Product Type | Gasoline Engine Water Pump |
| Pump Type | Centrifugal |
| Engine Type | Single-Cylinder, 4-Stroke, Air-Cooled |
| Engine Displacement | 196 cc |
| Maximum Power | 6.5 HP / 4.8 kW |
| Rated Speed | 3,600 rpm |
| Maximum Flow | 60 m³/h / 1,000 L/min |
| Maximum Head | Approx. 32 m |
| Maximum Suction | 5 m |
| Inlet | 3" / 75 mm |
| Outlet | 3" / 75 mm |
| Fuel Tank | Approx. 3.1 L |
| Pump Body | Aluminium |
| Impeller | Cast Iron / Anti-Rust Cast Iron |
| Diffuser | HT200 / Anti-Rust Cast Iron |
| Mechanical Seal | Carbon / Ceramic |
| Frame | Steel |
| Cooling | Air-Cooled |
| Liquid | Clean Water |
| Liquid Temperature | 0°C–40°C |
| Approx. Net Weight | 23 kg |
| Approx. Package Size | 545 × 435 × 435 mm |
The current LEO product information identifies the standard LGP30-A as a 6.5 HP, 3-inch pump, with a 60 m³/h maximum flow and approximately 32 m maximum head. The current LEO catalogue also lists the LGP30-A-1 variant with a 196 cc engine and 3.1 L tank, so the exact engine configuration should be checked against the nameplate when ordering.
6.5 HP 4-Stroke Engine
The LGP30-A is equipped with a single-cylinder, 4-stroke, air-cooled gasoline engine.
The standard published configuration provides:
- 196 cc displacement
- 6.5 HP maximum power
- Approximately 4.8 kW
- 3,600 rpm
- Air-cooled operation
- Separate engine lubrication
- Gasoline fuel operation
The 4-stroke engine does not require the gasoline/oil premixing used by 2-stroke engine pumps such as the smaller LGP10.
3-Inch Inlet and Outlet
The LGP30-A uses:
3" × 3" / 75 mm × 75 mm inlet and outlet connections.
The large hydraulic passages are designed for high-volume water transfer and allow the pump to achieve a maximum rated flow of approximately 1,000 L/min under suitable low-head conditions.
For best performance, the suction pipe should be properly sized, airtight and kept as short and straight as practical.
Maximum Flow
The published maximum flow for the LGP30-A is:
60 m³/h
equivalent to:
1,000 L/min
or approximately:
16.7 L/s.
This is a maximum-flow rating. The pump will not deliver 1,000 L/min at its maximum head. Actual flow depends on the total dynamic head and resistance of the connected piping system.
Hydraulic Performance
LEO's published pump curve gives the following approximate relationship between flow and head:
| Flow | Approx. Head |
|---|---|
| 0 m³/h | 32 m |
| 5 m³/h | 30.4 m |
| 10 m³/h | 29.3 m |
| 15 m³/h | 27.1 m |
| 20 m³/h | 25.5 m |
| 25 m³/h | 23.0 m |
| 30 m³/h | 20.5 m |
| 35 m³/h | 18.0 m |
| 40 m³/h | 16.2 m |
| 45 m³/h | 13.5 m |
| 50 m³/h | 11.0 m |
| 55 m³/h | 9.0 m |
| 60 m³/h | 6.0 m |
These figures are taken from LEO's published LGP pump performance data.
This curve makes the LGP30-A particularly suitable for high-flow applications. For example, at approximately 40 m³/h, the published curve indicates around 16.2 m head, while the maximum 60 m³/h flow is associated with only approximately 6 m head.
Maximum Head
The LGP30-A has a maximum head of approximately:
32 metres.
Maximum head represents the pump's approximate shut-off head. It should not be interpreted as the available head while simultaneously delivering the maximum 60 m³/h flow.
The actual operating point is determined by the intersection of the pump curve and the system curve.
Maximum Suction
The standard LGP30-A is specified with a maximum suction lift of approximately:
5 metres.
A 5 m suction condition is also listed in Malaysian product information.
Suction performance depends heavily on installation conditions, including:
- Suction lift
- Pipe length
- Pipe diameter
- Foot valve
- Air leakage
- Water temperature
- Pump priming
- Pipe fittings
- Atmospheric pressure
The suction pipe must remain airtight. Any air leakage on the suction side can significantly reduce pump performance or prevent proper priming.
Aluminium Pump Body
The LGP30-A uses an aluminium pump body, providing a relatively lightweight construction for a high-flow engine pump. LEO's material information also identifies the pump bracket and outlet/inlet components as aluminium.
The aluminium construction contributes to portability while the steel frame provides structural support for the engine and hydraulic assembly.
Cast-Iron Impeller
The hydraulic assembly uses a cast-iron/anti-rust cast-iron impeller.
The impeller is responsible for converting the rotational energy from the gasoline engine into hydraulic energy, generating the pressure and flow required for water transfer.
The LEO product range emphasizes the use of an anti-rust cast-iron impeller and diffuser for durability.
Mechanical Seal
The LGP30-A incorporates a carbon/ceramic mechanical seal.
The mechanical seal helps prevent water leakage along the rotating shaft between the hydraulic section and engine-drive assembly. LEO identifies its mechanical seal as one of the features contributing to reliable pump operation.
High-Efficiency Hydraulic System
The LGP30-A is designed with a hydraulic system optimized for high-volume water transfer.
LEO highlights:
- High hydraulic efficiency
- Low fuel consumption
- Specialized mechanical seal
- Anti-rust impeller and diffuser
- Durable construction
These characteristics make the pump appropriate for applications requiring extended water-transfer operation.
Fuel System
The LGP30-A-1 configuration is listed with a 3.1 L fuel tank, while some standard LGP30-A listings do not explicitly publish the tank capacity.
Because LEO has multiple LGP30-A engine configurations in its current catalogue, including LGP30-A-1, LGP30-A-1(GX160) and LGP30-A-1(XR950), the exact fuel-tank capacity should be verified against the supplied engine version.
Portable Steel Frame
The engine and pump are mounted on a steel frame, allowing the complete unit to be moved and positioned as a single assembly.
The LGP30-A-1 is listed at approximately 23 kg net weight, with package dimensions around 545 × 435 × 435 mm.
A Malaysian listing for the LGP30-A reports approximately 470 × 412 × 432 mm, illustrating that dimensions can differ between LGP30-A configurations and packaging versions.
Applications
The LEO LGP30-A is suitable for:
- Agricultural irrigation
- Farm irrigation
- Garden irrigation
- Water transfer from ponds
- Water transfer from reservoirs
- Swimming-pool drainage
- Rainwater transfer
- Construction-site water transfer
- Factory drainage
- Mine water transfer
- Municipal drainage
- Tank filling
- General clean-water supply
- Temporary water-transfer systems
LEO specifically lists applications involving water supply and drainage for factories, mines and municipal facilities, as well as field irrigation.
Suitable Liquid
The LGP30-A is intended primarily for:
Clean water or liquids with similar physical and chemical properties.
Specified liquid temperature:
0°C to 40°C.
Although some LEO application information mentions diluted wastewater in specific industrial applications, the standard pump should not be treated as a sewage or solids-handling pump. For water containing significant quantities of solids, sludge, sand or abrasive material, a dedicated solids-handling or sewage pump should be selected.
Main Advantages
- 6.5 HP gasoline engine
- 196 cc displacement
- Single-cylinder 4-stroke engine
- Air-cooled operation
- 3-inch / 75 mm inlet and outlet
- Maximum flow up to 60 m³/h
- Maximum flow up to 1,000 L/min
- Maximum head approximately 32 m
- Maximum suction approximately 5 m
- High-efficiency hydraulic system
- Low fuel consumption
- Aluminium pump body
- Cast-iron impeller
- Anti-rust diffuser
- Carbon/ceramic mechanical seal
- Steel support frame
- Compact portable construction
- Suitable for agricultural irrigation
- Suitable for construction and industrial water transfer
LGP30-A vs LGP20-A
| Feature | LGP30-A | LGP20-A |
|---|---|---|
| Engine Power | 6.5 HP | 5.5 HP |
| Engine Displacement | 196 cc | 163 cc |
| Inlet / Outlet | 3" / 75 mm | 2" / 50 mm |
| Maximum Flow | 60 m³/h | 30 m³/h |
| Maximum Head | 32 m | 32 m |
| Maximum Suction | 5 m | 8 m |
| Engine | 4-Stroke | 4-Stroke |
| Rated Speed | 3,600 rpm | 3,600 rpm |
| Main Application | High-volume transfer | Medium-volume transfer |
The principal advantage of the LGP30-A is its 3-inch hydraulic system and approximately double the maximum flow capacity of the LGP20-A.
Important Pump Selection Consideration
The 60 m³/h maximum flow should not be considered the normal operating flow for every installation.
For example, LEO's published curve indicates approximately:
20 m³/h → 25.5 m head
30 m³/h → 20.5 m head
40 m³/h → 16.2 m head
50 m³/h → 11 m head
60 m³/h → 6 m head.
Therefore, the LGP30-A is particularly useful when a high volume of water must be moved at relatively modest head.
For long-distance pumping, elevated discharge points or restrictive pipe systems, the actual flow will be lower.
Installation Recommendations
For best performance:
- Position the pump as close to the water source as practical.
- Use a properly sized 3-inch suction hose/pipe.
- Keep the suction line short and minimize sharp bends.
- Ensure all suction connections are airtight.
- Use an appropriate foot valve or strainer.
- Prime the pump before starting.
- Use a discharge pipe appropriate for the required flow.
- Avoid unnecessary restrictions on the suction side.
- Do not operate the pump without water.
- Install the pump on a stable, level surface.
Maintenance
Regular maintenance should include:
- Checking engine oil before operation.
- Maintaining the correct gasoline level.
- Cleaning the engine air filter.
- Keeping the cooling passages clean.
- Inspecting the spark plug.
- Checking suction and discharge connections.
- Cleaning the suction strainer.
- Inspecting the impeller and diffuser.
- Checking the mechanical seal for leakage.
- Checking the fuel system.
- Following the engine manufacturer's oil-change schedule.
- Draining fuel appropriately for long-term storage.
- Inspecting the steel frame and mounting points.
Technical Product Data
Brand: LEO
Model: LGP30-A
Category: Gasoline Engine Pump / Petrol Water Pump
Pump Type: Centrifugal
Engine Type: Single-cylinder, 4-stroke, air-cooled
Engine Displacement: 196 cc
Maximum Power: 6.5 HP / approx. 4.8 kW
Rated Speed: 3,600 rpm
Maximum Flow: 60 m³/h / 1,000 L/min
Maximum Head: Approx. 32 m
Maximum Suction: Approx. 5 m
Inlet: 3" / 75 mm
Outlet: 3" / 75 mm
Pump Body: Aluminium
Impeller: Cast iron / anti-rust cast iron
Diffuser: HT200 / anti-rust cast iron
Mechanical Seal: Carbon / Ceramic
Frame: Steel
Cooling: Air-cooled
Liquid: Clean water / similar liquids
Liquid Temperature: 0°C–40°C
Approx. Net Weight: 23 kg for LGP30-A-1 configuration
Fuel Tank: 3.1 L for LGP30-A-1 configuration
Package Size: Approx. 545 × 435 × 435 mm for LGP30-A-1 configuration.
Inquiry - LEO GASOLINE ENGINE PUMPS - LGP 30-A