B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO GASOLINE ENGINE PUMPS - LGP 30-W



The LEO LGP30-W is a heavy-duty 3-inch gasoline sewage/trash water pump designed for pumping dirty water, wastewater and liquids containing mud, sand, small stones and other debris up to 22 mm in diameter. It is powered by a 6.5 HP, 196 cc, single-cylinder, 4-stroke, air-cooled LEO G200-H gasoline engine and uses a 3-inch (80 mm) inlet and outlet. The pump delivers a maximum flow of approximately 60 m³/h (1,000 L/min) with a maximum head of approximately 30 m.

Unlike standard clean-water gasoline pumps such as the LGP30-A, the LGP30-W is specifically engineered for wastewater and debris-containing liquids. Its special volute and impeller design, cast-iron hydraulic components and abrasion-resistant silicon-carbide mechanical seal make it suitable for demanding drainage and sewage-transfer applications.

Product Description

The LEO LGP30-W Gasoline Sewage Pump is designed for applications where the pumped water may contain suspended solids, mud, sand and small debris.

The pump has a 3-inch suction and discharge configuration, allowing large volumes of contaminated water to be transferred quickly. Its maximum particle-handling capability is approximately 22 mm, making it considerably more suitable for dirty water than conventional clean-water centrifugal pumps.

The gasoline engine eliminates dependence on electrical power, making the LGP30-W suitable for construction sites, farms, quarries, mines, municipal drainage and emergency water removal.

Key Specifications

Specification LEO LGP30-W
Brand LEO
Model LGP30-W
Product Type Gasoline Sewage / Trash Water Pump
Pump Type Centrifugal Sewage Pump
Engine Model G200-H
Engine Brand LEO
Engine Type Single-cylinder, 4-stroke, air-cooled, OHV
Engine Displacement 196 cc
Engine Power 6.5 HP
Rated Speed 3,600 rpm
Inlet 3" / 80 mm
Outlet 3" / 80 mm
Maximum Flow 60 m³/h / 1,000 L/min
Maximum Head 30 m
Maximum Suction 5 m
Priming Time Approx. 120 seconds at 5 m suction
Maximum Solid Particle Size 22 mm
Fuel Tank Approx. 3.1 L
Engine Oil Capacity Approx. 0.55 L
Impeller HT200 Cast Iron
Diffuser HT200 Cast Iron
Pump Body Aluminium
Mechanical Seal Silicon Carbide / Silicon Carbide
O-Ring NBR
Frame Steel
Cooling Forced Air-Cooled
Fuel Unleaded gasoline, 90 octane or higher
Liquid Temperature 0°C–40°C
Overall Length 590 mm
Overall Width 437 mm
Overall Height 431 mm
Net/Dry Weight 30.6 kg

LEO's technical documentation specifies the LGP30-W at 6.5 HP, 196 cc, 3-inch inlet/outlet, 60 m³/h maximum flow, 30 m maximum head, 5 m suction and 22 mm maximum particle diameter.

6.5 HP G200-H Engine

The LGP30-W is powered by a LEO G200-H gasoline engine.

Engine specifications include:

  • 196 cc displacement
  • 6.5 HP rated power
  • Single-cylinder configuration
  • 4-stroke operation
  • Forced air cooling
  • OHV design
  • 3,600 rpm rated speed
  • CDI ignition system
  • Low-engine-oil shutdown system
  • Approx. 0.55 L engine-oil capacity

The 4-stroke configuration provides a practical solution for extended pumping applications and does not require the gasoline/oil premixing associated with conventional 2-stroke engines.

3-Inch High-Flow Design

The LGP30-W features:

3" / 80 mm inlet

and

3" / 80 mm outlet.

The large hydraulic passages allow the pump to achieve a maximum capacity of approximately:

60 m³/h

or:

1,000 L/min.

This makes the pump suitable for rapidly removing water from flooded or contaminated areas.

Maximum Flow

Maximum rated flow:

60 m³/h / 1,000 L/min

The maximum flow occurs under relatively low-head conditions. The actual flow will decrease as the total system head increases.

LEO's published hydraulic data shows approximately:

Flow Approx. Head
0 m³/h 30 m
5 m³/h 27 m
10 m³/h 25.5 m
15 m³/h 24 m
20 m³/h 22 m
25 m³/h 20.5 m
30 m³/h 18.5 m
35 m³/h 17 m
40 m³/h 15.5 m
45 m³/h 14.5 m
50 m³/h 11.5 m
55 m³/h 9.2 m
60 m³/h 7 m

The published technical curve confirms the approximate relationship between flow and head.

Maximum Head

The LGP30-W has a maximum head of approximately:

30 metres.

Maximum head is the approximate shut-off head and should not be confused with the head available at the maximum 60 m³/h flow.

For example, at around 40 m³/h, the published curve indicates approximately 15.5 m head, while at 60 m³/h, the available head is approximately 7 m.

Maximum Suction

Maximum suction is approximately:

5 metres

with a specified priming time of approximately:

120 seconds at 5 m suction.

Actual suction performance depends on:

  • Suction lift
  • Suction hose length
  • Hose diameter
  • Air leakage
  • Foot valve condition
  • Water temperature
  • Atmospheric pressure
  • Pump priming
  • Suction-side fittings

The suction line must be properly sealed. Air leakage can prevent the pump from achieving normal suction performance.

22 mm Solid-Handling Capability

One of the most important characteristics of the LGP30-W is its ability to handle debris up to approximately:

22 mm diameter.

This makes the pump suitable for liquids containing:

  • Mud
  • Sand
  • Small stones
  • Dirt
  • Organic debris
  • Wastewater
  • Suspended solids

The pump should nevertheless not be considered a heavy-duty slurry pump for highly abrasive or extremely dense solids.

Special Wastewater Volute and Impeller

The LGP30-W uses a special volute and impeller design developed for wastewater pumping.

The hydraulic geometry is designed to allow contaminated water and small debris to pass through the pump while reducing the risk of blockage.

This is a significant difference between the LGP30-W and ordinary clean-water models.

Cast-Iron Impeller and Diffuser

The LGP30-W uses durable HT200 cast-iron hydraulic components.

The material table identifies:

  • Impeller: HT200
  • Diffuser: HT200

Cast iron provides the mechanical durability required for pumping dirty water containing suspended particles.

Silicon Carbide Mechanical Seal

The LGP30-W uses a highly abrasion-resistant:

Silicon Carbide / Silicon Carbide mechanical seal

This is an important feature for a sewage/trash pump because contaminated water can contain abrasive particles that accelerate wear on conventional sealing materials. LEO specifically highlights the silicon-carbide seal for increased abrasive resistance, longer service life and reduced maintenance.

Aluminium Pump Body

The pump body is manufactured from aluminium.

The aluminium housing helps keep the overall pump weight manageable while providing a durable enclosure for the hydraulic components.

Easy Cleaning and Maintenance

The LGP30-W is designed so that the pump body can be disassembled for cleaning and debris removal.

This is particularly important for sewage and trash-water applications because small stones, mud and other debris can accumulate inside the pump. LEO specifically identifies easy disassembly and reassembly as one of the pump's features.

Reinforced Portable Frame

The pump and gasoline engine are mounted on a steel frame.

The frame provides:

  • Stable support during operation
  • Protection for the engine and pump
  • Easier transportation
  • Improved handling
  • Suitable positioning for temporary drainage work

The published overall dimensions are approximately:

590 × 437 × 431 mm

with a dry weight of approximately:

30.6 kg.

Fuel Tank

The LGP30-W is specified with approximately:

3.1 L fuel capacity

in current product listings.

Some LEO technical documentation lists the engine oil capacity at approximately 0.55 L.

Low-Oil Shutdown System

The gasoline engine is equipped with a low-engine-oil shutdown system.

This helps protect the engine from damage caused by operation with insufficient lubrication. The system is particularly useful for portable equipment that may be operated for extended periods at remote sites.

Applications

The LEO LGP30-W is designed for a wide range of dirty-water and wastewater applications:

  • Construction-site drainage
  • Floodwater removal
  • Agricultural drainage
  • Field irrigation
  • Farm drainage
  • Muddy-water pumping
  • Wastewater transfer
  • Sewage treatment
  • Mine drainage
  • Quarry drainage
  • Municipal drainage
  • Factory drainage
  • Water transfer containing small debris
  • Emergency water removal
  • Pond and reservoir drainage

LEO specifically identifies civil-engineering, mining, quarry and municipal sewage treatment, together with factory, mine and municipal water supply/drainage and field irrigation.

Suitable Liquid

Unlike the standard LGP30-A clean-water pump, the LGP30-W is designed for:

Dirty water, wastewater and liquids containing mud, sand, small rocks and debris.

Maximum specified particle diameter:

22 mm.

Specified liquid temperature:

0°C–40°C.

LGP30-W vs LGP30-A

Feature LGP30-W LGP30-A
Pump Type Sewage / Trash Pump Clean-Water Pump
Engine 6.5 HP / 196 cc 6.5 HP / 196 cc
Inlet / Outlet 3" / 80 mm 3" / 75 mm
Maximum Flow 60 m³/h 60 m³/h
Maximum Head 30 m Approx. 32 m
Max. Suction 5 m Approx. 5 m
Solid Handling Up to 22 mm Not intended for significant solids
Impeller HT200 Cast Iron Cast Iron
Mechanical Seal Silicon Carbide Carbon/Ceramic
Main Application Dirty water / wastewater Clean water
Pump Body Aluminium Aluminium

The most important distinction is the LGP30-W's ability to handle solids up to 22 mm and its abrasion-resistant hydraulic/sealing system.

Main Advantages

  • 6.5 HP gasoline engine
  • 196 cc LEO G200-H engine
  • 4-stroke OHV design
  • Air-cooled operation
  • 3-inch / 80 mm inlet and outlet
  • Maximum flow 60 m³/h
  • Maximum flow 1,000 L/min
  • Maximum head 30 m
  • Maximum suction 5 m
  • Handles particles up to 22 mm
  • Special wastewater volute
  • Special sewage-pump impeller design
  • HT200 cast-iron impeller
  • HT200 cast-iron diffuser
  • Silicon-carbide mechanical seal
  • Reinforced aluminium pump body
  • Easy pump-body disassembly for cleaning
  • Low-engine-oil shutdown
  • Steel portable frame
  • Suitable for muddy and contaminated water
  • Suitable for construction and municipal drainage

Installation Recommendations

For reliable operation:

  1. Position the pump as close to the water source as practical.
  2. Use a suitable 3-inch suction hose.
  3. Keep the suction line as short as possible.
  4. Ensure suction connections are airtight.
  5. Use a suitable large-particle strainer where required.
  6. Prime the pump before starting.
  7. Ensure the discharge hose can handle the expected flow and pressure.
  8. Avoid excessive restrictions on the suction side.
  9. Do not run the pump dry.
  10. Inspect the pump after pumping heavily contaminated water.
  11. Flush and clean the pump after particularly dirty applications.
  12. Keep the gasoline engine in a well-ventilated outdoor location.

Maintenance

Because the LGP30-W is intended for dirty water, maintenance is particularly important.

Recommended maintenance includes:

  • Check engine oil before starting.
  • Maintain the correct fuel level.
  • Clean the air filter regularly.
  • Inspect the spark plug.
  • Keep engine cooling passages clean.
  • Check the suction hose and connections.
  • Clean the suction strainer.
  • Open and clean the pump chamber when debris accumulates.
  • Inspect the impeller for wear.
  • Inspect the diffuser for abrasion.
  • Check the silicon-carbide mechanical seal for leakage.
  • Inspect O-rings and replace damaged seals.
  • Flush the pump with clean water after dirty-water operation where appropriate.
  • Change engine oil according to the engine maintenance schedule.
  • Inspect the steel frame and mounting hardware.
  • Drain/stabilize fuel for long-term storage as recommended by the engine manufacturer.

Technical Product Data

Brand: LEO
Model: LGP30-W
Category: Gasoline Sewage / Trash Water Pump
Pump Type: Centrifugal Sewage Pump
Engine Model: G200-H
Engine: Single-cylinder, 4-stroke, air-cooled, OHV
Displacement: 196 cc
Power: 6.5 HP
Rated Speed: 3,600 rpm
Inlet: 3" / 80 mm
Outlet: 3" / 80 mm
Maximum Flow: 60 m³/h / 1,000 L/min
Maximum Head: 30 m
Maximum Suction: 5 m
Priming Time: Approx. 120 seconds at 5 m suction
Maximum Particle Size: 22 mm
Fuel Tank: Approx. 3.1 L
Engine Oil Capacity: Approx. 0.55 L
Impeller: HT200 Cast Iron
Diffuser: HT200 Cast Iron
Pump Body: Aluminium
Mechanical Seal: Silicon Carbide / Silicon Carbide
O-Ring: NBR
Frame: Steel
Cooling: Forced Air-Cooled
Fuel: Unleaded gasoline, 90 octane or higher
Liquid Temperature: 0°C–40°C
Overall Length: 590 mm
Overall Width: 437 mm
Overall Height: 431 mm
Dry Weight: 30.6 kg.



 Inquiry - LEO GASOLINE ENGINE PUMPS - LGP 30-W