B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO PIPE PUMPS - XPM-180



The LEO XPM-180 is a compact 220V pipe-mounted booster pump designed for domestic water supply, pipeline pressure boosting and small water-transfer applications. It has a 0.18 kW (0.24 HP) motor, a flow range of approximately 1–30 L/min, and a maximum head of approximately 29.5 m. The pump features 3/4-inch inlet and outlet connections and a maximum suction lift of approximately 8 m.

Its compact construction makes the XPM-180 suitable where a small amount of additional water pressure is required without installing a larger conventional centrifugal pump. It can also be configured with a pressure tank, pressure switch and 5-way fitting for automatic domestic pressure-boosting applications.

Product Description

The LEO XPM-180 Pipe Pump is designed for compact water-pressure boosting and small-scale water-supply systems. With its 220V single-phase electrical supply and 180W motor, it is suitable for residential water systems where water pressure needs to be increased for taps, showers and other domestic outlets.

The pump's 3/4-inch inlet and outlet provide a compact connection size, while its hydraulic performance of up to approximately 30 L/min makes it suitable for lower-flow applications rather than high-volume water transfer.

The XPM-180 can also be integrated with a pressure switch and pressure tank to create an automatic pressure-boosting system, depending on the installation requirements.

Key Specifications

Specification LEO XPM-180
Brand LEO
Model XPM-180
Product Type Pipe Pump / Booster Pump
Application Domestic Water Supply / Pipeline Pressure Boosting
Voltage 220V
Frequency 50Hz
Motor Power 0.18 kW / 180W
Motor Power 0.24 HP
Flow Range 1–30 L/min
Maximum Head 29.5 m
Minimum Head Approx. 2 m
Maximum Suction 8 m
Inlet 3/4"
Outlet 3/4"
Pump Configuration Compact Pipe Pump
Optional Accessories Pressure tank, pressure switch, 5-way fitting

The published Malaysian specifications identify the XPM-180 as a 220V, 0.18 kW / 0.24 HP pipe pump with 1–30 L/min flow, 29.5–2 m head, 8 m maximum suction and 3/4" × 3/4" connections.

180W Motor

The XPM-180 uses a compact:

0.18 kW / 180W / 0.24 HP motor

with a 220V power supply.

The relatively low motor rating makes it appropriate for small domestic pressure-boosting duties where a large pump is unnecessary.

Flow Capacity

The XPM-180 has a published flow range of:

1–30 L/min

The maximum flow of approximately 30 L/min is equivalent to:

  • 1.8 m³/h
  • 0.5 L/s
  • 1,800 L/hour

Actual flow depends on the required discharge pressure and the resistance of the connected pipework.

Maximum Head

The maximum head is approximately:

29.5 m

This corresponds to approximately 2.95 bar of theoretical water head under ideal static conditions.

The pump's available flow decreases as system pressure/head increases. Therefore, the maximum 30 L/min and maximum 29.5 m head should not be considered simultaneous operating values.

The published operating range indicates approximately 29.5–2 m head across the pump's flow range.

3/4-Inch Inlet and Outlet

The XPM-180 is equipped with:

3/4" inlet × 3/4" outlet

This compact connection size makes it suitable for smaller domestic water-piping systems and installations where space is limited.

The smaller hydraulic connections also make the XPM-180 more appropriate for low-flow pressure boosting than for high-volume water transfer.

Maximum Suction

The published maximum suction is:

8 m

Actual suction performance depends on the installation, including:

  • Suction lift
  • Pipe length
  • Pipe diameter
  • Number of elbows
  • Foot valve
  • Air leakage
  • Water temperature
  • Atmospheric pressure

For best results, the suction pipe should be short, properly sized and completely airtight.

Pressure-Boosting Configuration

The XPM-180 can be supplied or configured with additional pressure-control components, including:

  • Pressure tank
  • Pressure switch
  • 5-way fitting

These components can be used to create an automatic domestic pressure-boosting arrangement.

A typical arrangement consists of the pump, pressure switch, pressure tank and pipe connections. When correctly configured, the pressure switch can control pump operation according to system pressure.

Domestic Water Applications

The XPM-180 is suitable for applications such as:

  • Household water pressure boosting
  • Residential water supply
  • Shower pressure boosting
  • Tap pressure boosting
  • Small water distribution systems
  • Pipeline pressurization
  • Small storage-tank systems
  • Small garden watering systems
  • Small irrigation systems
  • Water transfer within domestic piping
  • Low-flow booster applications

LEO's pump range is generally intended for domestic water supply, pressure boosting and garden/agricultural applications depending on the specific model.

Compact Pipe-Pump Design

The principal advantage of the XPM-180 is its compact configuration.

It is intended to be installed directly into a water-piping system rather than functioning as a large standalone high-flow pump.

This makes it useful for installations where:

  • Space is limited
  • Only moderate pressure boosting is required
  • A small motor is preferred
  • Existing domestic pipework needs additional pressure
  • A full-size booster system would be excessive

Performance Consideration

It is important to distinguish between flow and head when selecting the XPM-180.

The pump's published figures are:

Maximum flow: 30 L/min

Maximum head: 29.5 m

As system head increases, available flow decreases.

For example, if the domestic piping has substantial friction losses, multiple bends, filters or elevation changes, the actual delivered flow may be considerably below 30 L/min.

For pump selection, the required flow rate and total dynamic head (TDH) should be considered together.

Recommended Installation

For reliable operation:

  1. Install the pump in accordance with the manufacturer's flow-direction markings.
  2. Ensure the suction/inlet pipe is properly sealed.
  3. Use suitable 3/4-inch pipe or fittings.
  4. Avoid unnecessary elbows and restrictions.
  5. Ensure the pump is properly primed where required.
  6. Install a pressure switch and pressure tank if automatic pressure boosting is required.
  7. Protect the electrical connection from water exposure.
  8. Ensure the pump is installed in a suitable dry and ventilated location when used as a pipe-mounted booster.
  9. Do not operate the pump without water.
  10. Ensure the operating pressure remains within the limits of the connected plumbing system.

Maintenance

Routine maintenance should include:

  • Check for water leakage around connections.
  • Inspect pipe fittings and seals.
  • Check pressure-switch operation if installed.
  • Check pressure-tank pressure periodically.
  • Keep the pump and electrical connections dry.
  • Inspect for abnormal vibration or noise.
  • Check the inlet for blockage.
  • Ensure the pump is not operating continuously due to a system leak.
  • Disconnect electrical power before servicing.

Optional Pressure Tank and Pressure Switch

For a more complete domestic booster system, the XPM-180 can be paired with:

Pressure Tank + Pressure Switch + 5-Way Fitting

This configuration can provide automatic pump control and reduce unnecessary pump cycling.

The exact pressure-switch cut-in/cut-out settings should be selected according to the domestic plumbing system and pressure-tank specifications.

Main Advantages

  • Compact pipe-mounted pump
  • 220V electrical operation
  • Low power consumption at 180W
  • 0.24 HP motor
  • Flow up to 30 L/min
  • Maximum head approximately 29.5 m
  • Maximum suction approximately 8 m
  • 3/4" inlet and outlet
  • Suitable for domestic pressure boosting
  • Can be configured with pressure tank
  • Can be configured with pressure switch
  • Compact installation footprint
  • Suitable for small water-supply systems
  • Suitable for pipeline pressure boosting
  • Suitable for low-flow domestic applications

Technical Product Data

Brand: LEO
Model: XPM-180
Category: Pipe Pump / Domestic Booster Pump
Voltage: 220V
Frequency: 50Hz
Motor Power: 0.18 kW / 180W
Motor Power: 0.24 HP
Flow Range: 1–30 L/min
Head Range: 29.5–2 m
Maximum Head: 29.5 m
Maximum Suction: 8 m
Inlet: 3/4"
Outlet: 3/4"
Optional Accessories: Pressure tank, pressure switch, 5-way fitting
Primary Application: Domestic water supply and pipeline pressure boosting.



 Inquiry - LEO PIPE PUMPS - XPM-180