The LEO KB6000E is a heavy-duty single-phase petrol/gasoline generator designed for residential backup power, construction sites, workshops, commercial premises and other applications requiring an independent electrical supply. It provides approximately 5.0 kW rated output and 5.5 kW maximum output at 230V, 50Hz, and is powered by a 420cc, 13 HP, 4-stroke OHV air-cooled gasoline engine. The generator uses an electric starting system and is equipped with a large fuel tank for extended operating periods.
Product Description
The LEO KB6000E Gasoline Generator is a portable petrol-powered generator designed to provide reliable electrical power when mains electricity is unavailable or unsuitable.
Its 5 kW rated output makes it suitable for a broad range of electrical loads, while the 5.5 kW maximum output provides additional capacity for temporary starting or peak loads. The generator produces 230V single-phase power at 50Hz, making it suitable for common electrical equipment used in Malaysia and other 230V markets.
The KB6000E is powered by a 420cc engine rated at approximately 13 HP and uses an electric-start system, allowing the operator to start the generator conveniently using the starter system rather than relying solely on a recoil mechanism.
Key Specifications
| Specification | LEO KB6000E |
|---|---|
| Brand | LEO |
| Model | KB6000E |
| Product Type | Gasoline / Petrol Generator |
| Generator Type | Portable Single-Phase Generator |
| Rated Voltage | 230V |
| Frequency | 50Hz |
| Phase | Single Phase |
| Rated Output | 5.0 kW |
| Maximum Output | 5.5 kW |
| Engine Power | 13 HP |
| Engine Displacement | 420 cc |
| Engine Type | 4-Stroke OHV, Air-Cooled |
| Starting System | Electric Start |
| Fuel | Petrol / Gasoline |
| Fuel Tank | Approx. 28 L |
| Alternator | 100% Copper |
| AVR | Yes |
| Smart Throttle | Yes |
| Insulation Grade | H |
| Approx. Running Time at 50% Load | Up to 11 hours |
| Approx. Noise Level | 73–76 dB(A) at 7 m |
| Approx. Weight | 84–87 kg |
| Approx. Dimensions | 740 × 555 × 620 mm |
Published specifications vary slightly between LEO-series documentation and Malaysian distributor listings, particularly for fuel-tank capacity and weight. LEO's KB-series information lists a 32 L tank and approximately 84 kg, while Malaysian listings for the KB6000E commonly specify a 28 L tank and approximately 87 kg. For a retail listing, the actual nameplate/specification supplied with your unit should take precedence.
5.0 kW Rated Output
The KB6000E provides:
Rated Output: 5.0 kW
This is the continuous-duty output around which the generator should normally be operated.
A 5 kW generator can support a combination of suitable household, workshop or site equipment, provided the combined running load and motor-starting requirements remain within the generator's capacity.
5.5 kW Maximum Output
The maximum output is approximately:
5.5 kW
The additional capacity is useful for temporary peak demand, particularly when electrical motors, pumps, compressors or other inductive equipment start.
The 5.5 kW figure should not be treated as the continuous recommended load. For sustained operation, the 5.0 kW rated output is the more appropriate reference.
230V Single-Phase Output
The KB6000E is configured for:
230V / 50Hz / Single Phase
This makes it suitable for common Malaysian electrical equipment, including appropriate:
- Power tools
- Lighting
- Fans
- Pumps
- Refrigerators
- Workshop equipment
- Small compressors
- Construction equipment
- Domestic appliances
Actual compatibility depends on the equipment's rated voltage, starting current and total power requirement.
420cc 13HP Petrol Engine
The generator is powered by a:
420cc / 13 HP gasoline engine
LEO's KB-series information identifies the engine as the GB420(E)-2, while Malaysian LEO listings describe the engine as a 13 HP, OHV, air-cooled, 4-stroke engine.
The 4-stroke OHV configuration is designed for regular generator operation and does not require 2-stroke petrol/oil premixing.
Key engine characteristics include:
- 420cc displacement
- 13 HP
- 4-stroke operation
- OHV configuration
- Air cooling
- Petrol/gasoline fuel
- Electric starting
Electric Start
The KB6000E features:
Electric Start
This is particularly useful for a generator of this size because the operator can start the engine using the electrical starting system rather than manually pulling a recoil starter.
Electric-start generators are convenient for:
- Home backup systems
- Construction sites
- Workshops
- Commercial premises
- Repeated daily operation
The battery and electrical starting system should be maintained properly to ensure reliable starting.
100% Copper Alternator
The KB-series is specified with a:
100% copper alternator
Copper windings provide good electrical conductivity and are commonly used in generator alternators requiring reliable electrical performance. LEO's KB-series specification identifies the alternator material as 100% Cu.
AVR Voltage Regulation
The KB6000E is commonly listed with an:
AVR – Automatic Voltage Regulator
AVR helps regulate generator output voltage as the connected electrical load changes.
This is particularly useful when operating equipment that requires relatively stable voltage.
However, AVR-equipped conventional generators are not equivalent to inverter generators. Sensitive electronic equipment should still be evaluated according to its manufacturer's requirements before connection.
Smart Throttle
The LEO KB-series incorporates a smart-throttle/fuel-saving system designed to reduce fuel consumption by adjusting engine operation according to load conditions. LEO describes the system as capable of saving more than 10% fuel under applicable operating conditions.
The actual fuel consumption will depend on:
- Electrical load
- Engine condition
- Ambient temperature
- Fuel quality
- Maintenance
- Operating duration
Large Fuel Tank
The KB6000E is designed with a relatively large fuel tank.
LEO's KB-series specification lists:
32 L maximum fuel-tank capacity, while several Malaysian KB6000E listings specify 28 L.
This discrepancy appears to reflect different market/configuration specifications. For your website catalogue, it is safest to state 28 L if that matches your physical stock/nameplate, or 32 L if your supplied unit is the larger-tank configuration.
Extended Operating Time
LEO's KB-series data specifies approximately:
11 hours running time at 50% load
for the KB6000E configuration.
Actual runtime will vary substantially according to electrical load and fuel consumption.
A generator operating at a light load can run longer than one operating near its rated output.
Fuel-Level Indicator
The KB series incorporates a:
Pointer-type fuel-level indicator
This allows the operator to monitor fuel quantity directly from the generator's fuel-tank area. LEO identifies the pointer-type fuel indicator as one of the KB-series features.
Noise Level
Published KB-series data gives an approximate noise level of:
73–76 dB(A) at 7 metres
for the KB6000E.
Actual perceived noise depends on:
- Electrical load
- Installation surface
- Distance
- Surrounding structures
- Engine condition
- Operating environment
The KB6000E is therefore better suited to outdoor or appropriately ventilated generator locations than noise-sensitive indoor environments.
Heavy-Duty Steel Frame
The generator is mounted within a robust frame designed to protect the engine and alternator while providing a practical structure for handling and transportation.
The frame also helps keep the generator stable during operation.
Portability
Despite its substantial output, the KB6000E is designed as a portable generator.
Published dimensions are approximately:
740 × 555 × 620 mm
and the weight is approximately 84–87 kg, depending on the configuration/source.
For regular movement, suitable wheels and lifting/handling equipment should be used rather than attempting to carry the complete generator manually.
Suitable Applications
The LEO KB6000E is suitable for:
- Residential backup power
- Construction sites
- Workshops
- Hardware and machinery workshops
- Commercial premises
- Small factories
- Agricultural applications
- Outdoor events
- Temporary site power
- Emergency power supply
- Power tools
- Water pumps
- Lighting systems
- Suitable compressors
- Electrical equipment requiring 230V single-phase supply
Load Planning
A 5 kW generator should not simply be selected based on the sum of appliance nameplate wattages.
Motor-driven equipment can have significantly higher starting/surge current than its running consumption.
For example, equipment such as:
- Air compressors
- Water pumps
- Refrigerators
- Freezers
- Electric motors
- Grinders
- Saws
may require substantially more power during startup.
Therefore, the starting requirement of the largest motor load should be considered when planning the generator load.
Recommended Applications by Load
The KB6000E can be useful for combinations of equipment such as:
Construction/site use
- Lighting
- Drills
- Grinders
- Small saws
- Chargers
- Small pumps
Domestic backup
- Lighting
- Fans
- Refrigerator
- Television
- Selected kitchen appliances
- Small water pump
Workshop
- Lighting
- Hand tools
- Selected compressors
- Small machinery
The exact combination must be calculated based on each equipment's running and starting power.
Main Advantages
- 5.0 kW rated output
- 5.5 kW maximum output
- 230V single-phase operation
- 50Hz frequency
- 13 HP engine
- 420cc displacement
- 4-stroke OHV engine
- Air-cooled design
- Electric start
- 100% copper alternator
- AVR voltage regulation
- Smart throttle for improved fuel economy
- Large fuel tank
- Fuel-level indicator
- Approximately 11-hour runtime at 50% load
- Heavy-duty portable frame
- Suitable for residential, commercial and construction applications
Maintenance
Regular maintenance is essential for reliable generator operation.
Recommended checks include:
- Check engine oil before operation.
- Maintain the correct oil level.
- Inspect the air filter.
- Clean or replace the air filter according to the service schedule.
- Inspect the spark plug.
- Check the battery and battery terminals.
- Inspect electrical connections.
- Check fuel lines for leakage.
- Keep the alternator and ventilation openings clean.
- Inspect the frame and mounting hardware.
- Check generator output periodically.
- Change engine oil at the recommended service interval.
- Use clean, fresh petrol.
- Drain or stabilize fuel before extended storage according to the engine manufacturer's recommendations.
Safety Requirements
The KB6000E produces carbon monoxide, so it must never be operated inside a house, enclosed workshop, garage or other poorly ventilated space.
The generator should be:
- Operated outdoors or in a properly engineered generator area.
- Kept away from doors, windows and ventilation openings.
- Positioned on a stable, level surface.
- Kept away from combustible materials.
- Refuelled only after the engine has been stopped and allowed to cool.
- Properly grounded/earthed according to the installation requirements.
- Protected from rain and direct water exposure.
- Connected only to loads compatible with its voltage and capacity.
A qualified electrician should be used for any permanent building connection or transfer-switch installation.
Technical Product Data
Brand: LEO
Model: KB6000E
Category: Gasoline / Petrol Engine Generator
Generator Type: Single Phase
Voltage: 230V
Frequency: 50Hz
Rated Output: 5.0 kW
Maximum Output: 5.5 kW
Engine Power: 13 HP
Engine Displacement: 420cc
Engine Type: 4-Stroke OHV, Air-Cooled
Starting System: Electric Start
Alternator: 100% Copper
AVR: Yes
Fuel: Petrol / Gasoline
Fuel Tank: 28–32 L depending on configuration
Runtime at 50% Load: Approx. 11 hours
Noise: Approx. 73–76 dB(A) at 7 m
Insulation Grade: H
Weight: Approx. 84–87 kg
Dimensions: Approx. 740 × 555 × 620 mm.
Inquiry - LEO GASOLINE ENGINE GENERATORS - KB 6000E