B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


LEO GASOLINE ENGINE GENERATORS - KB 7000E



The LEO KB7000E is a heavy-duty single-phase petrol/gasoline generator designed for backup power, construction sites, workshops, commercial premises, agricultural applications and remote locations. It provides 6.0 kW rated output and 6.5 kW maximum output at 230V, 50Hz, powered by a 420cc 13 HP, 4-stroke OHV air-cooled gasoline engine with an electric-start system. The generator is equipped with AVR voltage regulation, a 100% copper alternator, a large 28-litre fuel tank and a smart-throttle system.

Product Description

The LEO KB7000E Gasoline Generator is designed to provide a dependable independent power source where mains electricity is unavailable, unreliable or unsuitable.

With a 6.0 kW continuous/rated output and 6.5 kW maximum output, it provides a higher power capacity than the KB6000E while retaining the same general 13 HP engine platform. The 230V single-phase output makes it suitable for a wide range of domestic, workshop, construction and commercial electrical equipment.

The generator uses an electric starter, making starting more convenient than a recoil-only generator. Its large fuel tank, fuel-level indicator, AVR and smart-throttle system are intended for practical extended operation.

Key Specifications

Specification LEO KB7000E
Brand LEO
Model KB7000E
Product Type Petrol / Gasoline Generator
Generator Type Single Phase
Rated Voltage 230V
Frequency 50Hz
Rated Output 6.0 kW
Maximum Output 6.5 kW
Engine Power 13 HP
Engine Displacement 420 cc
Engine Type 4-Stroke OHV, Air-Cooled
Starting System Electric Start
Alternator 100% Copper
AVR Yes
Fuel Petrol / Gasoline
Fuel Tank 28 L
Smart Throttle Yes
Fuel-Level Indicator Pointer Type
Approx. Runtime Around 10.5–11 hours at 50% load, depending on configuration
Construction Open-frame portable generator
Application Home, construction, workshop, commercial and agricultural power

LEO's own KB-series information specifies the KB7000E at 6 kW rated / 6.5 kW maximum output, 230V, with a 100% copper alternator. The Malaysian supplier listing specifies a 28 L fuel tank, 13 HP engine, electric starting and 4-stroke OHV air-cooled engine.

6.0 kW Rated Output

The KB7000E provides:

Rated Output: 6.0 kW

This is the appropriate output figure to use when calculating the generator's normal continuous electrical load.

The generator should generally be operated within its rated capacity rather than continuously at its maximum output.

6.5 kW Maximum Output

The maximum output is:

6.5 kW

The additional 0.5 kW of capacity can help accommodate short-duration peak demand and starting loads.

The distinction is important:

  • 6.0 kW = rated/continuous output
  • 6.5 kW = maximum output

Motor-driven equipment such as pumps, compressors, refrigerators and power tools can draw significantly more current during startup, so starting requirements must be considered when selecting loads.

230V Single-Phase Output

The KB7000E is designed for:

230V / 50Hz / Single Phase

This configuration is suitable for many standard electrical appliances and equipment used in Malaysia.

Potential applications include:

  • Power tools
  • Water pumps
  • Lighting
  • Fans
  • Refrigerators
  • Workshop equipment
  • Small compressors
  • Construction equipment
  • Agricultural equipment
  • Selected household appliances

The connected equipment must be compatible with 230V single-phase power and must remain within the generator's running and starting capacity.

420cc 13HP Engine

The KB7000E is powered by a:

420cc / 13 HP petrol engine

The engine is a:

  • 4-stroke
  • OHV configuration
  • Air-cooled
  • Petrol-powered
  • Electric-start engine

The 13 HP engine provides the mechanical power required to drive the alternator at the generator's operating speed.

Some international KB7000E listings identify the engine as the Zongshen GB420/GB420E, with certain markets quoting a higher engine horsepower figure. For the Malaysian LEO specification, 13 HP / 420cc is the appropriate published specification.

Electric Starting System

The KB7000E features:

Electric Start

An electric starter allows the operator to start the generator using the starter system rather than relying exclusively on manual recoil starting.

This is particularly useful for a generator of this size and is convenient for:

  • Home backup
  • Construction sites
  • Workshops
  • Commercial premises
  • Frequent generator use

The starting battery should be maintained and kept adequately charged to ensure reliable starting.

100% Copper Alternator

The KB7000E uses a:

100% copper alternator

LEO identifies 100% copper as the alternator material for the KB series. Copper windings provide good electrical conductivity and are commonly used for reliable generator alternator construction.

AVR Voltage Regulation

The generator incorporates:

AVR – Automatic Voltage Regulator

The AVR helps maintain a more stable output voltage as the electrical load changes.

This is useful when powering equipment that requires relatively consistent voltage.

However, the KB7000E is a conventional AVR generator rather than a true inverter generator. Sensitive electronic equipment should therefore be connected only when its manufacturer permits operation from a conventional AVR generator.

Smart Throttle Fuel-Saving System

The KB series incorporates a:

Smart Throttle

LEO describes the system as being designed to reduce fuel consumption by more than 10% under applicable operating conditions.

The actual saving depends on:

  • Electrical load
  • Engine speed
  • Operating conditions
  • Fuel quality
  • Maintenance condition

At lighter loads, reducing unnecessary engine output can help improve fuel efficiency.

28-Litre Fuel Tank

The Malaysian KB7000E specification lists:

28 L fuel tank capacity.

LEO's KB-series documentation describes the tank as an extra-large tank designed to provide approximately 20% greater capacity and longer working time than previous configurations.

A larger tank is useful when the generator is operated for extended periods because it reduces the frequency of refuelling.

Extended Runtime

Published KB7000E specifications indicate approximately:

10.5–11 hours at 50% load

depending on the particular market configuration.

Actual operating time will vary according to:

  • Connected load
  • Engine condition
  • Fuel quality
  • Ambient temperature
  • Maintenance
  • Throttle operation

A generator operating at 50% load will generally consume less fuel per hour than one operating close to its maximum capacity.

Pointer-Type Fuel Gauge

The KB7000E incorporates a:

Pointer-type fuel-level indicator

This allows the operator to monitor the remaining fuel level without opening the fuel tank. LEO specifically identifies the pointer fuel gauge as one of the KB-series features.

Portable Heavy-Duty Frame

The KB7000E uses an open-frame construction designed to protect the engine and alternator while providing a practical structure for transportation.

The generator is supplied with a wheel/handling arrangement in many market configurations, making movement easier despite its relatively high operating weight. LEO describes the KB series as having a "moving without gravity" design intended to make transportation easier.

Approximate Dimensions and Weight

Published specifications vary between market configurations.

The Malaysian supplier listing gives approximately:

740 × 560 × 620 mm

and:

87 kg for the KB6000E/KB7000E listing.

Other KB7000E configurations are published at approximately 83–84 kg, with dimensions around 702 × 528 × 561 mm.

For your product catalogue, the physical unit's nameplate and supplied packaging specification should take precedence if your particular stock differs.

Suitable Applications

The LEO KB7000E is suitable for:

  • Residential backup power
  • Construction sites
  • Workshops
  • Commercial premises
  • Agricultural operations
  • Small industrial applications
  • Outdoor events
  • Emergency power
  • Temporary site power
  • Water-pump operation
  • Power tools
  • Lighting systems
  • Suitable compressors
  • General 230V single-phase equipment

Construction-Site Applications

The 6 kW rated output makes the KB7000E particularly useful for construction environments where mains power may not yet be available.

It can provide power for appropriate combinations of:

  • Drills
  • Grinders
  • Saws
  • Lighting
  • Battery chargers
  • Small pumps
  • Other compatible power tools

The starting current of motor-driven tools must be considered when several items are used simultaneously.

Domestic Backup Applications

For household backup, the KB7000E can potentially supply selected essential loads such as:

  • Lighting
  • Fans
  • Refrigerator/freezer
  • Television
  • Internet equipment
  • Selected kitchen appliances
  • Water pump
  • Other compatible household equipment

It should not be assumed that all household appliances can be operated simultaneously. The total running load and starting/surge demand must remain within the generator's capability.

Load Management

For efficient generator operation, avoid connecting unnecessary loads.

A sensible load-management approach is:

  1. Start the generator without electrical load where appropriate.
  2. Allow the engine to stabilize.
  3. Connect essential loads first.
  4. Add larger loads individually.
  5. Monitor generator behaviour when starting motor-driven equipment.
  6. Avoid sustained operation above the rated 6.0 kW output.
  7. Disconnect unnecessary equipment when not required.

Advantages

  • 6.0 kW rated output
  • 6.5 kW maximum output
  • 230V single-phase
  • 50Hz operation
  • 13 HP / 420cc engine
  • 4-stroke OHV design
  • Air-cooled engine
  • Electric starting
  • 100% copper alternator
  • AVR voltage regulation
  • Smart throttle
  • Large 28 L fuel tank
  • Pointer-type fuel gauge
  • Portable open-frame construction
  • Suitable for home, workshop and construction use
  • Suitable for extended operating periods
  • Wheel/handling system for easier movement

Maintenance

Regular maintenance is necessary for reliable generator performance.

Recommended checks include:

  • Check engine oil before starting.
  • Maintain the correct oil level.
  • Change engine oil according to the manufacturer's service interval.
  • Inspect and clean the air filter.
  • Check the spark plug.
  • Inspect the fuel system for leakage.
  • Keep the fuel tank clean.
  • Check the starting battery.
  • Clean battery terminals.
  • Inspect electrical connections.
  • Keep the alternator and cooling passages clean.
  • Inspect frame bolts and mounting points.
  • Check the wheels and handles.
  • Check generator output periodically.
  • Use clean, fresh petrol.
  • Follow proper fuel-storage procedures for long periods of non-use.

Safety

The KB7000E produces carbon monoxide, which is hazardous and potentially fatal.

It must therefore be operated:

  • Outdoors
  • In a properly ventilated generator area
  • Away from doors and windows
  • Away from air-conditioning intakes
  • Away from combustible materials

Never operate the generator inside a house, garage, enclosed workshop or other poorly ventilated space.

Additional precautions:

  • Do not refuel while the engine is running.
  • Allow the engine to cool before refuelling.
  • Keep fuel away from flames and sparks.
  • Do not overload the generator.
  • Use suitable electrical cables.
  • Keep electrical connections dry.
  • Ensure proper grounding/earthing where required.
  • Disconnect loads before servicing.
  • Keep children and untrained personnel away from the generator.

Permanent connection to a building should be carried out by a qualified electrician using an appropriate transfer-switch arrangement.

Technical Product Data

Brand: LEO
Model: KB7000E
Category: Gasoline Engine Generator
Generator Type: Single Phase
Voltage: 230V
Frequency: 50Hz
Rated Output: 6.0 kW
Maximum Output: 6.5 kW
Engine Power: 13 HP
Engine Displacement: 420cc
Engine Type: 4-Stroke OHV, Air-Cooled
Starting System: Electric Start
Alternator: 100% Copper
AVR: Yes
Fuel: Petrol / Gasoline
Fuel Tank: 28 L
Fuel Gauge: Pointer Type
Smart Throttle: Yes
Approx. Runtime: 10.5–11 hours at 50% load, depending on configuration
Construction: Open-frame portable design
Approx. Weight: 83–87 kg, depending on configuration
Approx. Dimensions: Around 702–740 × 528–560 × 561–620 mm, depending on configuration.

LEO KB6000E vs KB7000E

Specification KB6000E KB7000E
Rated Output 5.0 kW 6.0 kW
Maximum Output 5.5 kW 6.5 kW
Voltage 230V 230V
Frequency 50Hz 50Hz
Engine Power 13 HP 13 HP
Engine 420cc 420cc
Starting Electric Electric
Fuel Tank 28 L 28 L
Alternator 100% Copper 100% Copper
AVR Yes Yes
Main Difference Lower output Higher output capacity

The key difference is the KB7000E's 6.0 kW rated / 6.5 kW maximum output, compared with the KB6000E's 5.0 kW rated / 5.5 kW maximum output. Both are listed with 13 HP engines, 230V output, electric starting and 28 L fuel tanks in the Malaysian specification.



 Inquiry - LEO GASOLINE ENGINE GENERATORS - KB 7000E