Product Overview
The SATA 09014A 128PC 1/4", 3/8" & 1/2" Drive Auto Tool Set is a comprehensive professional automotive and mechanical tool set designed for vehicle servicing, engine maintenance, workshop repair, machinery maintenance and general mechanical applications.
The set combines three common drive sizes—1/4", 3/8" and 1/2"—with metric 6-point sockets, deep sockets, E-Torx sockets, Torx and tamper-proof Torx bit sockets, hex and Phillips bits, spark plug sockets, combination wrenches, ratchets, extensions, universal joints, adapters and automotive-specific tools.
SATA's current product information identifies the 09014A as a 128-piece 1/4", 3/8" and 1/2" drive 6-point metric socket and wrench set. The manufacturer's current specification also includes 14mm 1/4" socket, 11mm long socket, 16/18/19mm 3/8" long sockets, 15mm X-BEAM combination wrench and a 9-piece extra-long ball-point hex key set.
Key Features
• Complete 128-piece professional automotive tool set.
• Three drive sizes: 1/4", 3/8" and 1/2".
• Extensive metric 6-point socket coverage.
• Standard and deep sockets included.
• 3/8" drive E-Torx socket set.
• 3/8" drive Torx, tamper-proof Torx, Hex, Phillips, Slotted and Pozidriv bit sockets.
• 1/2" drive M10 Triple Square bit socket.
• 16mm and 21mm spark plug sockets.
• Three quick-release ratchets.
• Three universal joints.
• Multiple extension bars.
• 12-piece metric combination wrench set.
• Additional 13mm X-BEAM combination wrench.
• 9-piece long-arm ball-point hex key set.
• Automotive tester.
• Two-way oil filter wrench.
• Ribe bit socket for automotive applications.
• Comprehensive adapter selection.
• Suitable for professional automotive workshops and mobile mechanics.
Complete Socket Selection
1/4" Drive 6-Point Metric Sockets
The standard 1/4" drive socket range includes:
• 4mm
• 5mm
• 6mm
• 7mm
• 8mm
• 9mm
• 10mm
• 11mm
• 12mm
• 13mm
• 14mm
The 6-point configuration provides positive contact with compatible hexagonal fasteners and is suitable for general automotive and mechanical work. SATA's current specification lists the 1/4" drive range from 4mm through 14mm.
1/4" Drive 6-Point Deep Sockets
The set includes:
• 8mm
• 9mm
• 10mm
• 11mm
• 12mm
Deep sockets provide additional reach for fasteners located on longer studs or recessed assemblies.
The current SATA specification confirms five 1/4" drive deep sockets.
3/8" Drive 6-Point Metric Sockets
The standard 3/8" drive socket range includes:
• 9mm
• 10mm
• 11mm
• 12mm
• 13mm
• 14mm
• 15mm
• 16mm
• 17mm
• 18mm
• 19mm
This range covers many common fastener sizes encountered in automotive engines, suspension systems, chassis components and general mechanical assemblies.
3/8" Drive 6-Point Deep Sockets
The deep socket range includes:
• 13mm
• 14mm
• 15mm
• 16mm
• 17mm
• 18mm
• 19mm
These are useful where additional socket depth is required around long studs, recessed nuts and other difficult-to-access fasteners.
3/8" Drive E-Torx Sockets
The set includes eight E-Torx sockets:
• E8
• E10
• E11
• E12
• E14
• E16
• E18
• E20
E-Torx sockets are designed for external Torx fasteners commonly found in modern automotive assemblies.
1/2" Drive 6-Point Metric Sockets
The 1/2" drive socket selection includes:
• 20mm
• 21mm
• 22mm
• 24mm
• 27mm
• 30mm
• 32mm
The larger drive system provides additional capability for larger automotive and mechanical fasteners.
3/8" Drive Bit Socket Selection
The set contains 17 pieces of 3/8" drive bit sockets covering several common drive profiles.
Torx®
• T20
• T30
• T40
Tamper-Proof Torx®
• T45
• T50
• T55
• T60
The tamper-proof Torx bits incorporate the required security profile for compatible fasteners with a central pin.
Hex
• 3mm
• 4mm
• 5mm
• 6mm
Phillips
• #1
• #2
Slotted
• 5.5mm
• 6.5mm
The combination of these bit profiles makes the set suitable for more than conventional hexagonal fasteners and increases its usefulness for automotive and equipment servicing.
1/2" Drive Triple Square Bit Socket
• 1 × 1/2" Drive M10 Triple Square Bit Socket
The M10 Triple Square bit socket is intended for compatible triple-square/XZN fasteners commonly encountered in certain automotive applications.
Its inclusion makes the 09014A more suitable for specialist automotive servicing than a conventional socket-only set.
Spark Plug Sockets
The set includes two 3/8" drive spark plug sockets:
• 16mm
• 21mm
These provide dedicated socket options for common automotive spark plug sizes.
The rubber or retention mechanism inside a spark plug socket helps retain the plug during removal and installation, depending on the individual socket design.
Quick-Release Ratchets
The set includes three quick-release ratchets:
• 1 × 1/4" Drive
• 1 × 3/8" Drive
• 1 × 1/2" Drive
This provides a dedicated ratchet for each drive system.
The quick-release mechanism allows sockets to be removed efficiently and reduces the time required to change between socket sizes.
The three-ratchet configuration is confirmed by SATA's official product specification.
Universal Joints
Three universal joints are included:
• 1 × 1/4" Drive
• 1 × 3/8" Drive
• 1 × 1/2" Drive
Universal joints allow the socket to articulate relative to the drive tool.
They are useful when direct alignment is restricted by surrounding engine components, brackets, pipes or machinery structures.
Extension Bars
The set includes multiple extension solutions:
• 1 × 1/4" Drive 2" Wobble/Dual-Function Extension
• 2 × 3/8" Drive Extensions – 3" and 6"
• 2 × 1/2" Drive Extensions – 5" and 10"
The different lengths allow the technician to select the appropriate reach according to the working environment.
The wobble/dual-function design of the smaller extension provides additional flexibility for accessing fasteners in confined areas.
1/4" Drive Spinner Handle
• 1 × 1/4" Drive Spinner Handle
The spinner handle provides an alternative to the ratchet for faster manual socket operation where high torque is not required.
It is useful for running nuts and bolts on or off quickly during assembly and disassembly.
Adapters
The set contains several adapters for improving compatibility between the drive systems:
• 3/8" Female × 1/4" Male Adapter
• 3/8" Female × 1/2" Male Adapter
• 1/4" Shank × 1/4" Drive Bit Adapter
These adapters allow selected tools and accessories to be used across different drive systems where appropriate.
Metric Combination Wrenches
The main combination wrench selection includes:
• 8mm
• 9mm
• 10mm
• 11mm
• 12mm
• 13mm
• 14mm
• 15mm
• 16mm
• 17mm
• 18mm
• 19mm
The current SATA specification identifies 12 metric combination wrenches from 8mm through 19mm, together with an additional 13mm X-BEAM combination wrench.
The combination wrench provides an open-end and box-end configuration, allowing the technician to work with fasteners where a socket cannot be positioned.
X-BEAM Combination Wrench
• 1 × 13mm X-BEAM® Combination Wrench
The additional X-BEAM wrench provides another 13mm option with a specialized ergonomic beam profile.
It complements the standard combination wrench selection and adds another commonly used automotive size.
1/4" Drive Bit Set
The set includes an 18-piece 1/4" drive bit set covering:
Slotted
• 4mm
• 5mm
• 6.5mm
Phillips
• #1
• #3
Hex
• 3mm
• 4mm
• 5mm
• 6mm
Pozidriv
• PZ1
• PZ2
Torx®
• T10
• T15
• T20
• T25
• T30
• T40
This provides additional screwdriver-bit capability for small fasteners and general assembly work.
Long-Arm Ball-Point Hex Key Set
• 1 × 9-Piece Metric Long-Arm Ball-Point Hex Key Set
Sizes:
• 1.5mm
• 2mm
• 2.5mm
• 3mm
• 4mm
• 5mm
• 6mm
• 8mm
• 10mm
The ball-point end permits angled access to compatible internal hex fasteners, which can be particularly useful when straight-line access is restricted.
Automotive Tester
• 1 × Automotive Circuit Tester
The automotive tester is intended for basic electrical circuit checking during vehicle servicing.
It adds basic electrical diagnostic capability to an otherwise mechanical-focused tool set.
Oil Filter Wrench
• 1 × Two-Way Oil Filter Wrench – 63–102mm
The adjustable two-way oil filter wrench is designed to assist with removal of compatible spin-on oil filters.
The 63–102mm operating range covers a broad selection of automotive filter diameters.
Ribe Bit Socket
• 1 × 1/2" Drive Ribe 10 Bit Socket
• 12mm Shank × 110mm Length
The Ribe-style bit socket is intended for compatible specialist automotive fasteners.
Its extended 110mm length provides additional reach in applications where a standard short bit socket may not provide sufficient access.
Go-Through Screwdrivers
The set includes:
• 1 × Slotted Go-Through Screwdriver – 6 × 100mm
• 1 × Phillips Go-Through Screwdriver – #2 × 100mm
The go-through design allows the screwdriver shaft to extend through the handle, making the tool suitable for applications where additional impact or leverage may be required.
Additional Long Sockets
The current SATA specification includes additional long 6-point sockets:
• 1/4" Drive 11mm Long Socket
• 3/8" Drive 16mm Long Socket
• 3/8" Drive 18mm Long Socket
• 3/8" Drive 19mm Long Socket
These extend the working capability of the standard and deep socket selection and are particularly useful for fasteners requiring additional reach.
Professional Automotive Applications
The SATA 09014A is suitable for:
• Car servicing
• Automotive repair
• Engine maintenance
• Transmission servicing
• Suspension repair
• Brake system maintenance
• Chassis repair
• Spark plug replacement
• Oil filter servicing
• Automotive electrical checking
• Motorcycle servicing
• Fleet maintenance
• Workshop repair
• Machinery maintenance
• General mechanical assembly
• Mobile mechanic applications
Advantages of SATA 09014A
• Comprehensive 128-piece automotive tool selection.
• Three drive sizes in one set.
• 1/4" drive for small and precision fasteners.
• 3/8" drive for general automotive applications.
• 1/2" drive for larger fasteners.
• Standard and deep 6-point sockets.
• E-Torx sockets included.
• Torx and tamper-proof Torx capability.
• Hex, Phillips, Slotted and Pozidriv bit sockets.
• Triple Square M10 bit socket.
• 16mm and 21mm spark plug sockets.
• Three quick-release ratchets.
• Three universal joints.
• Multiple extension lengths.
• Comprehensive adapter selection.
• 12-piece metric combination wrench set.
• Additional X-BEAM combination wrench.
• Automotive circuit tester.
• Oil filter wrench.
• Ribe automotive bit socket.
• Long-arm ball-point hex keys.
• Suitable for professional automotive workshops.
Specifications
Brand: SATA
Model: 09014A
Catalogue Code: ST09014A
Product Type: Auto Tool / Socket & Wrench Set
Total Pieces: 128 Pieces
Drive Sizes: 1/4", 3/8" & 1/2"
Socket Profile: 6-Point
Standard: Metric
1/4" Drive Standard Sockets: 4–14mm
1/4" Drive Deep Sockets: 8–12mm
3/8" Drive Standard Sockets: 9–19mm
3/8" Drive Deep Sockets: 13–19mm
3/8" Drive E-Torx: E8–E20
1/2" Drive Standard Sockets: 20–32mm
3/8" Drive Bit Sockets: 17 Pieces
3/8" Drive Spark Plug Sockets: 16mm & 21mm
1/2" Drive Triple Square: M10
Combination Wrenches: Metric 8–19mm + 13mm X-BEAM
Quick-Release Ratchets: 1/4", 3/8", 1/2"
Universal Joints: 1/4", 3/8", 1/2"
Oil Filter Wrench: 63–102mm
Long-Arm Ball-Point Hex Keys: 9 Pieces
Storage: Professional Tool Case
The current official SATA specification lists the set as 128 pieces and confirms the detailed configuration.
Set Contents at a Glance
| Category | Contents |
|---|---|
| 1/4" Standard Sockets | 4–14mm |
| 1/4" Deep Sockets | 8–12mm |
| 3/8" Standard Sockets | 9–19mm |
| 3/8" Deep Sockets | 13–19mm |
| 3/8" E-Torx | E8–E20 |
| 1/2" Standard Sockets | 20–32mm |
| 3/8" Bit Sockets | 17 Pieces |
| Spark Plug Sockets | 16mm & 21mm |
| Triple Square | M10 |
| Combination Wrenches | 8–19mm + 13mm X-BEAM |
| Ratchets | 1/4", 3/8", 1/2" |
| Universal Joints | 1/4", 3/8", 1/2" |
| Extension Bars | 1/4", 3/8", 1/2" |
| Hex Keys | 9-Piece Metric Ball-Point |
| Oil Filter Wrench | 63–102mm |
| Automotive Tester | 1 Piece |
Storage & Portability
The 09014A is supplied as a comprehensive organized automotive tool set rather than a loose collection of individual tools.
A dedicated storage case keeps the three drive systems, sockets, ratchets, wrenches, bits and automotive accessories together, making it suitable for workshop benches, service vehicles and mobile technicians.
One Malaysian distributor lists the set at approximately 13kg with dimensions of around 60 × 41 × 11cm, while another listing gives approximately 12kg and 57 × 12 × 40cm. These figures can vary according to packaging and supplier configuration, so shipping dimensions and weight should be confirmed before publishing them as fixed specifications.
Safety & Usage Notes
Always select the correct socket, bit or wrench size and ensure full engagement with the fastener before applying torque.
Do not use standard chrome hand sockets with impact tools unless the individual component is specifically rated for impact use. Use dedicated impact-rated sockets for pneumatic or electric impact applications.
For torque-critical automotive fasteners, use a calibrated torque wrench and follow the vehicle manufacturer's specified torque values.
When using the automotive tester, follow the tester's operating instructions and ensure the electrical system is suitable for the testing procedure.
Inspect sockets, ratchets, extensions, adapters and bits regularly. Do not use components showing cracks, deformation, excessive wear or other damage.
Product Notes
There are some differences between older distributor listings and SATA's current catalogue regarding the detailed piece breakdown. The current SATA specification identifies the 09014A as a 128-piece set and includes additional components such as a 14mm 1/4" socket, 11mm 1/4" long socket, 16/18/19mm 3/8" long sockets, 15mm X-BEAM wrench and 9-piece long-arm ball-point hex key set.
For a current website listing, the manufacturer's latest configuration should be used as the primary reference rather than older distributor lists.
SEO Product Description
SATA 09014A 128PC 1/4", 3/8" & 1/2" Drive Auto Tool Set is a comprehensive professional automotive socket and wrench set designed for car repair, engine servicing, mechanical maintenance and workshop applications. The set combines 1/4", 3/8" and 1/2" drive systems with 6-point metric standard and deep sockets, 3/8" drive E-Torx sockets, Torx and tamper-proof Torx bit sockets, Hex, Phillips, Slotted and Pozidriv bits, M10 Triple Square bit socket, 16mm and 21mm spark plug sockets and multiple extension bars. It also includes three quick-release ratchets, three universal joints, metric combination wrenches, a 13mm X-BEAM wrench, long-arm ball-point hex keys, automotive tester, two-way 63–102mm oil filter wrench, Ribe bit socket, adapters and screwdrivers. With its broad socket coverage and automotive-specific accessories, the SATA 09014A 128PC Auto Tool Set is an ideal choice for professional mechanics, automotive technicians, workshops, fleet maintenance and serious DIY users.
Inquiry - SATA 128PC 1/4" & 3/8" & 1/2" DR. AUTO TOOL SET - 09014A