The SATA 92712 Low Vibration Claw Hammer (Crane Type) 0.8LB is a professional striking tool designed for nailing, light demolition, carpentry, assembly and general maintenance applications where controlled impact and reduced hand vibration are important. The hammer features a Chrome Molybdenum alloy steel head, an integrated head-and-handle construction, and a patented shock-absorbing design intended to reduce vibration generated during striking. SATA’s catalogue identifies model 92712 as an Anti-Vibration Curved Claw Hammer 0.8Lb, with a 730g head weight and 335mm overall length.
The crane-type curved claw provides an effective geometry for pulling and removing nails, while the hammer face is designed for general striking work. The claw is also positioned at an approximately 2.5° inclination, which SATA describes as providing an optimal tapping angle. The head design additionally allows one-hand operation with a nail held at the head, while the large claw angle assists with nail pulling.
Key Features
- Brand: SATA
- Model: 92712
- Product Type: Low Vibration Curved Claw Hammer
- Design: Crane Type / Curved Claw
- Hammer Weight: 0.8 lb class
- Head Weight: 730g
- Overall Length: 335mm
- Head Material: Chrome Molybdenum alloy steel
- Handle Type: Round-hole shock-absorbing handle
- Anti-Vibration: Yes
- Claw Type: Curved claw
- Claw Inclination: Approximately 2.5°
- Head Construction: Integrated/riveted head design
- Handle Design: Ergonomic, vibration-damping
- Primary Applications: Nailing, nail removal, carpentry, construction, assembly and maintenance
- Warranty: Not covered under SATA Lifetime Warranty because it is a wear/striking item.
Chrome Molybdenum Alloy Steel Hammer Head
The hammer head is manufactured from Chrome Molybdenum alloy steel, selected for its high toughness and durability. This construction is designed to withstand repeated impact during normal hammering operations. SATA's catalogue specifically identifies Chrome Molybdenum alloy steel as the head material for the 92712 anti-vibration claw hammer.
The material is particularly suitable for a professional striking tool because the hammer head must withstand repeated impact without excessive deformation under normal intended use.
Low-Vibration Shock-Absorbing Design
One of the primary features of the SATA 92712 is its anti-vibration construction. The patented shock-absorbing design is intended to reduce vibration transferred to the user's hand and arm when striking.
This can provide several practical benefits during repetitive work:
- Reduced hand vibration
- Improved user comfort
- Better control during striking
- Less fatigue during repeated hammering
- More comfortable operation over extended periods
SATA describes the design as capable of absorbing shock to reduce vibration for improved comfort and safety.
Round-Hole Shock-Absorbing Handle
The 92712 uses a round-hole damping handle designed to absorb part of the impact generated during hammering. The handle is also ergonomically shaped to improve handling and control.
This design is particularly beneficial when the hammer is used repeatedly for tasks such as:
- Nail installation
- Nail removal
- Timber assembly
- General construction
- Workshop maintenance
- Light repair work
The reduced vibration can make repetitive striking more comfortable compared with a conventional rigid-handle hammer.
Crane-Type Curved Claw
The curved claw is designed primarily for nail extraction and pulling applications. Its curved geometry provides leverage against the working surface when removing nails.
The crane-type configuration is useful for:
- Pulling embedded nails
- Removing bent nails
- Dismantling timber assemblies
- Carpentry work
- Construction repair
- General maintenance
The large claw angle is designed to improve nail-pulling effectiveness, while the approximately 2.5° head inclination provides an optimized tapping angle.
Nail Holding Function
A notable feature of the 92712 is its ability to support one-hand nail operation. SATA's catalogue highlights a design in which a nail can be attached at the head holder, allowing the user to position the nail before striking.
This can be useful when working in locations where one hand is needed for positioning or stabilizing the workpiece.
It can also improve convenience during initial nail placement, although proper hand positioning and appropriate eye protection should always be used when performing striking operations.
Integrated Head Construction
The hammer incorporates an integrated rivet-shaped construction designed to keep the hammer head and handle securely connected. SATA identifies this integrated construction as one of the features of its anti-vibration hammer series.
A secure head-to-handle connection is important for a striking tool because repeated impacts place significant mechanical stress on the assembly.
335mm Overall Length
The SATA 92712 has an overall length of approximately 335mm. This provides a practical balance between swing control, reach and striking leverage.
The 335mm format makes it suitable for both workshop and general construction applications without being excessively long for routine nail work.
730g Head Weight
The product is commonly marketed as a 0.8LB hammer, while SATA's catalogue specifies the model's actual hammer weight as 730g.
The 730g head provides sufficient mass for effective general-purpose striking while keeping the tool manageable for carpentry, assembly and maintenance applications.
Ergonomic Design
The combination of the round-hole shock-absorbing handle, curved claw and balanced hammer head provides a design intended for controlled, repetitive use.
The ergonomic handle helps provide:
- Secure hand positioning
- Better striking control
- Reduced vibration transfer
- Improved comfort
- Reduced fatigue during repetitive work
Advantages
Low-Vibration Operation: The shock-absorbing design helps reduce vibration transferred to the user's hand during impact.
Chrome Molybdenum Head: Provides high toughness and durability for repeated striking applications.
Curved Crane-Type Claw: Provides leverage for effective nail pulling and removal.
2.5° Head Inclination: Designed to provide an optimized tapping angle.
Nail Holding Function: Supports convenient one-hand nail positioning before striking.
Ergonomic Handle: Designed for comfortable handling and improved control.
335mm Length: Provides a useful combination of leverage and maneuverability.
730g Head Weight: Suitable for general-purpose professional hammering.
Integrated Head Construction: Helps maintain a secure connection between the hammer head and handle.
Professional SATA Design: Suitable for workshops, construction, carpentry and maintenance applications.
Recommended Applications
The SATA 92712 is suitable for:
- Carpentry
- Woodworking
- Construction work
- Nail installation
- Nail removal
- Timber assembly
- Furniture assembly
- General maintenance
- Workshop repairs
- Equipment assembly
- Renovation work
- Light demolition
- Building maintenance
- DIY projects
- Professional trades
Technical Specifications
| Specification | Details |
|---|---|
| Brand | SATA |
| Model No. | 92712 |
| Product Name | Low Vibration Claw Hammer (Crane Type) |
| Hammer Type | Anti-Vibration Curved Claw Hammer |
| Nominal Weight | 0.8 lb |
| Head Weight | 730g |
| Overall Length | 335mm |
| Head Material | Chrome Molybdenum Alloy Steel |
| Claw Type | Curved / Crane Type |
| Head Inclination | Approx. 2.5° |
| Handle Type | Round-Hole Shock-Absorbing Handle |
| Vibration Control | Patented Shock-Absorbing Design |
| Head Construction | Integrated / Rivet-Type |
| Application | Nailing, Nail Removal, Carpentry & Maintenance |
| Warranty | Excluded from Lifetime Warranty |
The published SATA catalogue specification lists 92712 at 730g and 335mm overall length, with pack information of 5 pieces per pack.
Product Highlights
SATA 92712 – Low Vibration Claw Hammer (Crane Type) 0.8LB
- Professional anti-vibration claw hammer
- Chrome Molybdenum alloy steel head
- 730g head weight
- 335mm overall length
- Crane-type curved claw
- Approximately 2.5° head inclination
- Optimized tapping angle
- Patented shock-absorbing design
- Reduced vibration during striking
- Round-hole damping handle
- Ergonomic handle design
- Integrated head-and-handle construction
- Nail-holding function for one-hand operation
- Large-angle claw for improved nail pulling
- Suitable for carpentry, construction and maintenance
- Designed for repetitive professional use
- Excluded from SATA Lifetime Warranty as a wear/striking item.
SEO Product Description
The SATA 92712 Low Vibration Claw Hammer (Crane Type) 0.8LB is a professional anti-vibration curved claw hammer designed for carpentry, construction, nail installation, nail removal, assembly and general maintenance applications. Featuring a durable Chrome Molybdenum alloy steel hammer head, the 92712 provides high toughness and reliable impact performance. Its patented shock-absorbing design and round-hole damping handle help reduce vibration generated during hammering, improving comfort and control during repetitive work. The crane-type curved claw provides effective leverage for pulling nails, while the approximately 2.5° head inclination is designed for an optimized tapping angle. With a 730g head weight and 335mm overall length, the SATA 92712 provides a practical combination of striking force, control and maneuverability for professional workshops, carpentry, construction and maintenance applications.
Inquiry - SATA LOW VIBRATION CLAW HAMMER (CRANE TYPE) - 92712