The SATA 93482 T Series Utility Knife is a professional 18mm snap-off utility knife designed for demanding cutting, trimming, packaging, construction, workshop, installation and maintenance applications. It combines a durable zinc-alloy blade body, reinforced stainless-steel blade sleeve and an ergonomic dual-material ABS + TPR handle for improved strength, grip and user comfort. SATA specifies an 8-point, 18 × 100mm blade with 0.5mm thickness.
The 93482 is built for users who require a larger 18mm cutter than the 9mm SATA 93481. Its wider blade provides greater cutting capacity for thicker materials, while the snap-off design allows a fresh cutting edge to be exposed as the existing edge becomes worn.
Key Features
- Brand: SATA
- Model: 93482 / ST93482
- Series: T Series
- Product Type: Rubber Grip Snap-Off Utility Knife
- Blade Size: 18mm
- Blade Length: 100mm
- Blade Width: 18mm
- Blade Thickness: 0.5mm
- Blade Type: Snap-off
- Blade Sections: 8-point
- Blade Material: SK2 steel replacement blades
- Body: Zinc alloy
- Blade Sleeve: Reinforced stainless steel
- Handle: Dual-material ABS + TPR
- Grip: Ergonomic soft-grip design
- Thumb Support: Integrated thumb bridge
- Blade Snapper: Built-in, slide-out design
- Spare Blade Storage: Integrated storage compartment
- Replacement Blades: SATA ST93433A, ST93436 and ST93437
- Catalog Weight: 87.80g
- Overall Length: Approximately 17.1cm
- Height: Approximately 23mm
- Country of Origin: China
- Warranty: Consumable item; excluded from SATA Lifetime Warranty
18mm Heavy-Duty Snap-Off Blade
The SATA 93482 uses an 18mm × 100mm snap-off blade with a 0.5mm thickness. The larger 18mm blade provides greater rigidity and cutting capacity than narrower utility knife formats. SATA identifies the blade as an 8-point snap-off design.
The eight scored sections allow the user to restore a sharp cutting edge by snapping off the worn section. This extends the useful life of the blade and avoids having to replace the entire blade assembly after the first cutting edge becomes dull.
The 18mm format is particularly suitable for applications involving thicker or more resistant materials where a compact 9mm cutter may not provide sufficient blade support.
Typical applications include:
- Cardboard and heavy packaging
- Carpet and flooring materials
- Plastic sheets
- Vinyl and floor coverings
- Wallpaper
- Insulation materials
- Workshop materials
- Construction finishing materials
- General maintenance materials
- Packaging and warehouse materials
Durable Zinc-Alloy Construction
The knife incorporates a zinc-alloy body designed to provide a rigid and durable structure for professional use. SATA's product information identifies the blade body as zinc alloy, providing strength and durability.
The metal body helps support the blade mechanism and provides a solid platform for controlled cutting.
This construction makes the 93482 suitable for frequent use in professional environments where a lightweight disposable cutter may not provide the desired level of rigidity.
Reinforced Stainless-Steel Blade Sleeve
The SATA 93482 incorporates a thickened stainless-steel blade sleeve designed to increase structural strength and help prevent deformation.
The reinforced sleeve surrounds the blade and provides additional support during cutting. This is particularly important when the operator applies greater forward pressure to cut thicker materials.
The reinforced design contributes to:
- Better blade stability
- Improved structural rigidity
- Increased durability
- Reduced deformation
- More controlled cutting
ABS + TPR Dual-Material Handle
The 93482 uses a dual-material ABS and TPR handle.
The ABS engineering-plastic component provides structural support, while the TPR rubber component provides a softer contact surface for improved grip and comfort. SATA describes the ergonomic dual-material housing as improving grip while reducing hand fatigue.
The handle is designed to provide:
- Improved grip
- Better cutting control
- Reduced hand slipping
- Greater comfort
- Better pressure distribution
- Reduced fatigue during repetitive work
Integrated Thumb Bridge
A thumb bridge is incorporated into the handle design to provide an additional hand-contact point.
The thumb bridge allows the user to position the thumb securely while applying controlled forward pressure to the cutter. SATA specifically identifies the thumb bridge as part of the ergonomic dual-material housing.
This is useful when cutting materials that require sustained or controlled pressure.
Built-In Blade Snapper
The SATA 93482 features a built-in blade snapper that slides out from the body.
When the current cutting edge becomes dull, the used section can be positioned in the snapper and safely broken off, exposing the next sharp section. SATA identifies this built-in mechanism as a feature designed to provide easy access and convenient renewal of the blade edge.
This eliminates the need to carry a separate tool for snapping off worn blade sections.
For professional users, this is particularly useful when cutting continuously throughout the day.
SK2 Replacement Blades
SATA specifies SK2 steel blades for the 93482, selected for sharpness and extended blade life.
Compatible replacement blade references include:
- ST93433A
- ST93436
- ST93437
SATA's catalogue identifies these replacement blades for the 93482.
Using the appropriate SATA replacement blades maintains the correct fit and cutting performance of the utility knife.
Ergonomic Professional Design
The 93482 is designed for users who perform repetitive cutting operations.
The combination of the metal body, steel blade sleeve, ABS/TPR grip and thumb bridge provides a balance between structural rigidity and ergonomic handling.
The dual-material grip is especially useful for:
- Long-duration cutting
- Repetitive carton opening
- Construction trimming
- Workshop material preparation
- Installation work
- Warehouse operations
SATA's professional-tool documentation specifically highlights the dual-material case, thumb bridge, steel blade sleeve and built-in blade snapper as key design features.
Suitable Applications
Packaging and Carton Cutting
The 18mm blade provides a substantial cutting edge for opening cartons and cutting thicker packaging materials.
Construction
Suitable for various controlled trimming and cutting tasks involving appropriate construction and finishing materials.
Carpet and Flooring
The larger blade format is useful for cutting and trimming suitable carpet, vinyl and flooring materials.
Workshop Maintenance
Can be used for general material preparation, trimming, packaging removal and maintenance work.
Installation
Suitable for installers who need a durable cutter for films, coverings, packaging and other materials.
Warehouse and Logistics
The snap-off blade design allows workers to quickly restore a sharp cutting edge during repetitive packaging work.
Product Advantages
18mm Blade: Provides a wider cutting edge and greater cutting capacity than smaller utility knife formats.
100mm Blade Length: Provides useful blade reach for general-purpose and heavier-duty cutting applications.
0.5mm Blade Thickness: Provides a balance between cutting sharpness and blade rigidity.
8-Point Snap-Off Design: Provides multiple fresh cutting edges from a single blade.
Zinc-Alloy Body: Provides a strong and durable knife structure.
Stainless-Steel Blade Sleeve: Increases durability and helps resist deformation.
ABS + TPR Handle: Combines structural support with a comfortable, slip-resistant grip.
Thumb Bridge: Improves hand positioning and cutting control.
Built-In Blade Snapper: Allows convenient removal of worn blade sections.
SK2 Blades: Provide sharp and durable cutting performance.
Ergonomic Design: Designed to improve grip and reduce hand fatigue during repetitive work.
Technical Specifications
| Specification | Details |
|---|---|
| Brand | SATA |
| Model No. | 93482 / ST93482 |
| Series | T Series |
| Product Type | Rubber Grip Snap-Off Utility Knife |
| Blade Type | Snap-Off |
| Blade Design | 8-Point |
| Blade Length | 100mm |
| Blade Width | 18mm |
| Blade Thickness | 0.5mm |
| Body Material | Zinc Alloy |
| Blade Sleeve | Reinforced Stainless Steel |
| Handle Material | ABS + TPR |
| Handle Design | Dual Material with Thumb Bridge |
| Blade Snapper | Built-In / Slide-Out |
| Replacement Blades | ST93433A / ST93436 / ST93437 |
| Blade Material | SK2 Steel |
| Catalog Weight | 87.80g |
| Overall Length | Approx. 171mm |
| Height | Approx. 23mm |
| Country of Origin | China |
| Application | Packaging, Construction, Workshop, Installation & Maintenance |
| Warranty | Consumable; Excluded from SATA Lifetime Warranty |
SATA's official product page lists the ST93482 catalog weight as 87.80g, overall length as 17.1cm and height as 23mm. SATA's technical documentation specifies the 100 × 18 × 0.5mm blade dimensions.
Recommended Replacement Blades
For the SATA 93482, the recommended replacement blade references are:
SATA ST93433A
SATA ST93436
SATA ST93437
These are specified by SATA for the 93482 and use SK2 steel for sharpness and durability.
When replacing blades, use the correct 18mm-compatible blade specification rather than narrower 9mm blades.
Safety and Maintenance
Always keep the blade properly seated in the blade sleeve and avoid placing fingers or other body parts in the cutting path.
When the cutting edge becomes dull, use the integrated blade snapper to remove the worn section rather than applying excessive cutting force with a dull blade.
Dispose of snapped blade sections immediately and appropriately. Loose blade segments should not be left on a workbench, floor or inside packaging.
Inspect the blade sleeve and locking mechanism regularly. Do not continue using the knife if the blade holder, sleeve or handle is damaged.
Keep the knife clean and dry and store it in a safe location when not in use.
The 93482 is a wear-and-tear consumable product and is not covered by SATA's Lifetime Warranty.
Product Highlights
SATA 93482 – T Series 18mm Utility Knife
- Professional 18mm snap-off utility knife
- T Series design
- 8-point snap-off blade
- 18 × 100mm blade
- 0.5mm blade thickness
- Durable zinc-alloy construction
- Reinforced stainless-steel blade sleeve
- ABS + TPR dual-material handle
- Ergonomic soft grip
- Integrated thumb bridge
- Improved cutting control
- Reduced hand fatigue
- Built-in slide-out blade snapper
- Convenient worn-blade removal
- SK2 replacement blade compatibility
- Compatible with ST93433A
- Compatible with ST93436
- Compatible with ST93437
- Suitable for carton cutting
- Suitable for packaging
- Suitable for construction
- Suitable for carpet and flooring
- Suitable for workshop applications
- Suitable for warehouse work
- Suitable for installation
- Suitable for maintenance
- Suitable for general-purpose cutting
- Professional durable design
- Consumable item excluded from SATA Lifetime Warranty
SEO Product Description
The SATA 93482 T Series Utility Knife with ABS and TPR Handle 18mm is a professional 8-point snap-off utility knife designed for packaging, construction, workshop, warehouse, installation and maintenance applications. Featuring a durable zinc-alloy body, reinforced stainless-steel blade sleeve and ergonomic ABS + TPR dual-material handle, the 93482 provides excellent durability, grip and cutting control. Its 18 × 100mm, 0.5mm snap-off blade provides eight replaceable cutting sections, allowing users to quickly restore a sharp edge as the blade becomes worn. The integrated thumb bridge improves handling comfort, while the built-in slide-out blade snapper allows convenient removal of used blade sections without requiring a separate tool. Compatible with SATA ST93433A, ST93436 and ST93437 SK2 replacement blades, the SATA 93482 is an ideal professional utility knife for tradesmen, contractors, warehouse personnel, installers, maintenance technicians and workshop users requiring a durable 18mm cutter for repeated cutting and trimming applications.
Inquiry - SATA T SERIES,UTILITY KNIFE WITH ABS AND TPR HANDLE,18MM - 93482