The SATA 95201 Scraper with Wood Handle is a professional heavy-duty hand scraper designed primarily for removing dirt, carbon deposits, gasket residue, sealant, paint, rust and other unwanted material from engine cylinder-head surfaces and metal surfaces. It features a heavy-duty precision-ground scraper blade for improved edge strength and an ergonomic wooden handle designed to provide a comfortable, secure grip during repeated scraping operations. SATA specifically identifies the tool for clearing dirt from engine cylinder surfaces and various metal surfaces.
The 95201 is particularly useful in automotive repair, engine maintenance, mechanical workshops, fabrication, maintenance and general surface-preparation work, where a rigid manual scraper is required to remove stubborn deposits before cleaning, inspection, sealing or reassembly.
Key Features
- Brand: SATA
- Model: 95201
- Product Type: Wood Handle Putty Scraper / Heavy-Duty Scraper
- Blade Type: Heavy-duty scraper blade
- Blade Edge: Precision-ground / ground cutting edge
- Handle Material: Wood
- Handle Design: Ergonomic wooden handle
- Blade Width: Approximately 120mm
- Catalog Weight: Approximately 87g
- Primary Application: Surface scraping and residue removal
- Automotive Application: Engine cylinder-head surface cleaning
- Suitable Surfaces: Metal and other suitable hard surfaces
- Quantity: 1 piece
- Warranty: Consumable item; not covered under SATA Lifetime Warranty
Heavy-Duty Scraper Blade
The SATA 95201 uses a heavy-duty blade with a precision-ground edge. The ground edge is designed to provide sufficient strength for demanding scraping operations while maintaining an effective working edge.
The rigid blade is particularly suitable for removing material that has adhered firmly to metal surfaces, including:
- Dirt
- Carbon deposits
- Old gasket residue
- Sealant residue
- Paint residue
- Corrosion deposits
- Hardened contaminants
- General surface buildup
The blade should be used with controlled pressure and at an appropriate angle to avoid unnecessary damage to the work surface.
Precision-Ground Edge
The scraper incorporates a precision-ground working edge intended for heavy-duty scraping applications.
A properly ground edge allows the operator to concentrate scraping force along the blade edge, helping lift and separate unwanted material from the surface.
This makes the 95201 useful for preparatory work before:
- Gasket replacement
- Engine reassembly
- Surface cleaning
- Sealant application
- Painting
- Metal repair
- Component inspection
SATA's catalogue specifically describes the blade as precision-ground for heavy-duty edges.
Comfortable Wood Handle
The 95201 features a wooden handle designed for comfortable use and ease of grip. SATA identifies the wood handle as a key feature intended to provide improved comfort during use.
Compared with a completely rigid metal scraper, the wooden handle provides a more traditional hand-tool grip and can be comfortable during repetitive scraping operations.
The handle provides:
- Secure hand positioning
- Comfortable grip
- Good control
- Reduced direct contact with the metal shaft
- Suitable leverage for scraping
- Practical handling during extended maintenance work
Engine and Cylinder-Head Applications
One of the primary applications identified by SATA for the 95201 is clearing dirt from engine cylinder-head surfaces.
During engine servicing, deposits such as old gasket material, carbon, sealant and accumulated dirt can interfere with proper surface preparation.
The 95201 can be used to manually remove suitable deposits before:
- Cleaning the component.
- Inspecting the mating surface.
- Installing a replacement gasket.
- Applying suitable sealant.
- Reassembling the engine.
The scraper should be used carefully on precision-machined surfaces. Excessive force or an unsuitable scraping angle can potentially mark or damage sensitive surfaces.
Metal Surface Cleaning
In addition to automotive applications, SATA specifies the 95201 for various types of metal surfaces.
This makes it suitable for general maintenance and workshop applications involving the removal of adhered material from suitable metal components.
Potential applications include:
- Machinery maintenance
- Metal fabrication
- Workshop cleaning
- Automotive components
- Mechanical assemblies
- Surface preparation
- Equipment maintenance
- General industrial maintenance
120mm Working Width
Published SATA catalogue data lists the 95201 with a 120mm specification, corresponding to the scraper blade width.
The relatively wide blade allows the operator to cover a larger surface area with each stroke.
A wider scraper is particularly useful when cleaning:
- Large metal surfaces
- Engine components
- Flat mounting surfaces
- Machinery surfaces
- Workbench materials
- General workshop surfaces
The broad working edge also helps distribute scraping force over a wider area.
Compact and Lightweight Design
The SATA 95201 is a relatively compact hand scraper, with SATA catalogue information listing a catalog weight of approximately 87g.
Its lightweight construction makes it easy to keep in:
- Automotive toolboxes
- Workshop tool cabinets
- Maintenance kits
- Mechanics' tool bags
- Service vehicles
- General hand-tool collections
Despite its low weight, the heavy-duty scraper edge is designed for practical surface-cleaning work.
Suitable Applications
Automotive Repair
The 95201 is especially useful for mechanics working on engine components and cylinder-head surfaces.
Engine Maintenance
Suitable for removing old deposits and residue from appropriate metal engine surfaces during servicing.
Gasket Surface Preparation
Useful for removing old gasket material before installing replacement components. Care should be taken around precision-machined mating surfaces.
Workshop Maintenance
Suitable for removing accumulated dirt, residue and deposits from metal components and equipment.
Metal Fabrication
Useful for removing unwanted material from suitable metal surfaces during preparation and finishing.
General Cleaning
Can be used for heavy-duty manual scraping where a rigid scraper edge is appropriate.
Product Advantages
Heavy-Duty Blade: Designed for demanding scraping and surface-cleaning applications.
Precision-Ground Edge: Provides an effective working edge for removing stubborn deposits.
Wood Handle: Provides a comfortable traditional grip for extended use.
Wide 120mm Blade: Covers a relatively large working area with each scraping stroke.
Automotive Focus: Suitable for cleaning engine cylinder-head surfaces.
Metal Surface Application: Designed for removing dirt and deposits from various metal surfaces.
Lightweight: Approximately 87g catalog weight for convenient handling and storage.
Manual Operation: Requires no electricity, compressed air or batteries.
Versatile Workshop Tool: Suitable for automotive, mechanical, maintenance and fabrication applications.
Technical Specifications
| Specification | Details |
|---|---|
| Brand | SATA |
| Model No. | 95201 |
| Product Name | Scraper with Wood Handle |
| Product Type | Wood Handle Putty Scraper |
| Blade Type | Heavy-Duty Scraper Blade |
| Blade Edge | Precision-Ground / Ground Edge |
| Blade Width | Approx. 120mm |
| Handle Material | Wood |
| Handle Design | Ergonomic / Comfortable Grip |
| Catalog Weight | Approx. 87g |
| Primary Use | Scraping & Surface Cleaning |
| Automotive Use | Engine Cylinder-Head Surface Cleaning |
| Surface Application | Metal and Suitable Hard Surfaces |
| Quantity | 1 Pc |
| Operation | Manual |
| Warranty | Consumable; Not Covered Under SATA Lifetime Warranty |
The official SATA product information lists a catalog weight of 87g and identifies the tool as a wood-handle putty scraper with a heavy-duty edge. SATA catalogue data also lists 120mm for the 95201.
Professional Applications
The SATA 95201 is suitable for:
- Automotive mechanics
- Engine technicians
- Workshop technicians
- Maintenance personnel
- Mechanical engineers
- Metal fabricators
- Automotive repair shops
- Industrial maintenance teams
- General tradesmen
It is particularly valuable as part of an automotive hand-tool kit where surface cleaning and residue removal are routine maintenance operations.
Safety and Maintenance
Always wear appropriate eye protection and work gloves when scraping. Removed deposits, rust particles and metal fragments can become airborne during aggressive scraping.
Use the scraper with controlled strokes and avoid excessive force. When working on engine cylinder heads or other precision-machined surfaces, use appropriate care to prevent scratching, gouging or deformation.
Do not use the scraper as a pry bar, chisel or striking tool unless specifically designed for such use.
Keep the blade clean and dry after use. Inspect the edge regularly for excessive wear, cracks or deformation. Store the tool in a dry environment to help protect the blade and wooden handle.
The SATA 95201 is classified as a consumable/wear-and-tear product and is not covered under SATA's Lifetime Warranty.
Product Highlights
SATA 95201 – Scraper with Wood Handle
- Professional SATA scraper
- Heavy-duty scraper blade
- Precision-ground working edge
- Strong scraping performance
- Comfortable wooden handle
- Ergonomic hand grip
- Approx. 120mm blade width
- Approx. 87g catalog weight
- Suitable for engine cylinder-head cleaning
- Suitable for gasket residue removal
- Suitable for dirt removal
- Suitable for carbon and deposit removal
- Suitable for metal surface cleaning
- Suitable for workshop maintenance
- Suitable for automotive repair
- Suitable for mechanical maintenance
- Suitable for fabrication work
- Compact and lightweight
- Manual operation
- No battery or power supply required
- Consumable item
- Not covered under SATA Lifetime Warranty
SEO Product Description
The SATA 95201 Scraper with Wood Handle is a professional heavy-duty surface scraper designed for automotive repair, engine maintenance, workshop cleaning, metal surface preparation and general maintenance applications. It features a precision-ground heavy-duty scraper blade designed for effective removal of dirt, gasket residue, carbon deposits, sealant, paint residue and other unwanted material from suitable surfaces. The 120mm-wide blade provides efficient coverage when cleaning larger areas, while the comfortable wooden handle provides secure grip and controlled scraping action during repetitive work. SATA specifically recommends the 95201 for clearing dirt from engine cylinder-head surfaces and various metal surfaces, making it a practical tool for mechanics, automotive technicians, maintenance personnel, fabricators and workshop professionals. With its durable scraper blade, comfortable wood handle and versatile surface-cleaning capability, the SATA 95201 Wood Handle Scraper is a useful addition to professional automotive and maintenance tool kits.
Inquiry - SATA SCRAPER WITH WOOD HANDLE - 95201