B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


SATA HIGHLIGHT CIRCUIT TESTER - 62505



The SATA 62505 Highlight Circuit Tester is a compact electronic test pen designed for electrical voltage and circuit checking. It combines zero/live line identification, line continuity testing and DC voltage detection in one portable instrument. The tester uses intelligent chip control for a more sensitive response and incorporates a self-check function to help confirm that the internal battery is sufficiently charged before testing.

Key Features

  • Multi-function circuit testing: Supports zero/live line detection, line on/off detection and DC voltage detection.
  • Wide voltage detection range: Suitable for DC 12–24V and AC 24–250V applications.
  • Zero/live line identification: The tester provides different visual indications for live and zero lines. A red light with a buzzer indicates the live line, while a green light indicates the zero line.
  • Continuity detection: Can be used to check whether a circuit or line is connected or broken. A green indicator signifies a conductive path, while no indication signifies a broken line.
  • DC polarity detection: In DC testing, a red light with buzzer indicates positive voltage, while a green light indicates negative voltage.
  • Self-check function: The built-in self-check function helps verify battery condition before use. A green indicator indicates sufficient battery power; if the indicator does not illuminate correctly, the battery should be replaced.
  • Intelligent chip control: Electronic chip control provides a faster and more sensitive response during circuit detection.
  • High-brightness LED indication: Clear LED indications make the test result easier to identify during electrical troubleshooting.
  • PCB circuit-board design: The internal PCB arrangement provides a wider sensing/detection path for smoother circuit detection.
  • High-insulation casing: The outer housing uses high-insulation material to help reduce the risk of electrical leakage during proper use.
  • Pen clip: Integrated pen-clip design allows convenient attachment to a work pocket or tool storage area.
  • Durable S2 screwdriver bit: The tester incorporates an S2 steel tip with full hardening heat treatment for improved wear resistance and durability.
  • Compact and lightweight: With a net weight of approximately 25 g, it is convenient for everyday electrical inspection and service work.

Technical Specifications

Specification Details
Brand SATA
Product Series Highlight Circuit Tester
Product Code 62505
Product Type Electronic Circuit Tester / Test Pen
Measuring Range – DC 12–24V
Measuring Range – AC 24–250V
Overall Length Approx. 155 mm
Overall Width Approx. 16 mm
Overall Height Approx. 20 mm
Official Listed Dimensions 15.52 × 1.65 × 2.07 cm
Net Weight Approx. 0.025 kg / 25 g
Indicator High-brightness LED
Detection Functions Zero/live line, continuity, DC voltage
Self-Check Yes
Intelligent Chip Control Yes
Insulation High-insulation material casing
Tip Material S2 steel
Battery Internal replaceable button-cell battery system
Warranty No warranty / consumable item

SATA's official product listing gives the dimensions as 15.52 cm × 1.65 cm × 2.07 cm and the net weight as 0.025 kg, with the specified measuring range of DC 12–24V / AC 24–250V. SATA's product information also identifies the 62505 as a consumable item that is not covered by its standard lifetime warranty.

Detection Functions

1. Zero / Live Line Detection

The 62505 can distinguish between live and zero lines during appropriate AC testing. The red LED accompanied by a buzzer indicates the live line, while the green LED indicates the zero line. This makes it useful for quick identification during electrical troubleshooting.

2. Line Continuity Detection

The tester can check whether an electrical line or circuit has continuity. A green indicator signifies that the circuit path is connected, while the absence of the expected indication can indicate an open or broken circuit.

3. DC Voltage Detection

For low-voltage DC applications within its specified range, the tester can indicate polarity. A red light with buzzer indicates positive voltage, while a green light indicates negative voltage.

4. Battery Self-Check

Before carrying out measurements, the built-in self-check function can be used to verify whether the internal battery has adequate power. This helps reduce the possibility of relying on a depleted battery during testing.

Construction and Design

The SATA 62505 combines the form factor of a conventional electrical test pen with electronic detection circuitry. Its high-insulation casing is designed to provide insulation around the internal electronic components, while the pen clip makes it convenient for electricians and technicians to carry the tester during service work.

The S2 steel test tip receives full hardening heat treatment, providing greater resistance to wear during normal testing and screwdriver-tip contact applications. However, SATA specifically warns that the 62505 must not be used as a normal screwdriver.

Typical Applications

The SATA 62505 is suitable for:

  • Electrical circuit inspection
  • AC live-line identification
  • Zero/live wire identification
  • Low-voltage DC testing
  • Circuit continuity checking
  • Electrical troubleshooting
  • Switch and wiring inspection
  • Building electrical maintenance
  • Automotive low-voltage electrical checks
  • Workshop electrical servicing
  • General electrician tool kits
  • Maintenance and repair work

Advantages for Electricians and Technicians

The primary advantage of the 62505 is that several basic electrical checking functions are integrated into one compact tester. Instead of carrying separate tools for basic live-line identification, continuity checking and DC polarity detection, the user can perform these checks with one lightweight instrument.

The combination of LED indication, audible warning, self-check capability and intelligent chip control provides quick feedback during routine electrical diagnostics.

Its compact dimensions and approximately 25 g weight also make it suitable for keeping in a tool pouch, electrician's bag or work pocket.

Important Safety Precautions

The SATA 62505 should only be used within its specified DC 12–24V / AC 24–250V measurement range.

Do not touch the measuring tip/blade with your hand when testing an energized circuit, as this can result in electric shock. SATA also states that the tester should not be used as an ordinary screwdriver.

The LED may illuminate when the tester is brought close to an energized object due to the operating principle of the product. This indication should not, by itself, be treated as definitive proof of an electrical connection; always follow appropriate electrical testing and isolation procedures.

Product Highlights

SATA 62505 Highlight Circuit Tester is a compact, multifunctional electrical test pen featuring AC 24–250V and DC 12–24V detection, zero/live line identification, continuity testing, DC polarity detection, self-check capability, high-brightness LED indication, intelligent chip control, high-insulation housing, pen clip and durable S2 steel tip. It is designed for electricians, technicians, automotive service personnel and maintenance professionals requiring a portable tester for routine electrical inspection.



 Inquiry - SATA HIGHLIGHT CIRCUIT TESTER - 62505