B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


SATA HIGH PRECISION NON-CONTACT ELECT. MEASURING PEN - 62702A



The SATA 62702A High Precision Non-Contact Electrical Measuring Pen is a professional non-contact AC voltage detector designed for fast and convenient identification of energized wires, cables, sockets and electrical equipment without the need to strip insulation or make direct electrical contact. It combines adjustable detection sensitivity, visual and audible alarms, automatic sensing, an integrated LED flashlight and automatic power-off in a compact pen-style body.

The 62702A provides a standard detection range of approximately 48–1000V AC, with its sensitivity-extension function allowing detection down to approximately 12V AC. This makes it suitable for electrical installation, maintenance, troubleshooting and inspection work where rapid voltage presence detection is required.

Key Features

  • Non-contact voltage detection: Detects the presence of AC voltage without requiring direct contact with an exposed conductor.
  • Wide voltage detection range: Approximately 48–1000V AC in standard mode and approximately 12–1000V AC when the sensitivity-extension function is activated.
  • High-precision detection: Adjustable sensitivity allows the tester to be adapted to different electrical environments and conductor conditions.
  • Adjustable sensitivity: High sensitivity improves detection of lower-voltage signals, while reduced sensitivity can help distinguish adjacent energized circuits more accurately.
  • Three-level signal indication: Different voltage/current signal intensities are indicated by different LED colours: green for low, yellow for medium and red for high.
  • Audible and visual warning: The tester provides simultaneous sound and light indications when AC voltage is detected.
  • Live wire identification: Can assist in distinguishing live and neutral conductors by comparing the strength of the detected signal.
  • Cable and socket inspection: Suitable for checking whether cables, wires and electrical sockets are energized.
  • Breakpoint detection: Can assist in locating interruptions or breaks in an energized wire or cable.
  • Built-in LED flashlight: Integrated white LED lighting provides illumination when working in dark or poorly lit areas.
  • Automatic sensing: The detector automatically responds to an AC electrical field when brought close to an energized conductor.
  • Power ON/OFF control: Dedicated power control allows the tester to be switched off when not required, helping conserve battery power.
  • Automatic power-off: The detector switches off automatically after approximately 5 minutes without detected voltage or user operation. When the flashlight is operating, automatic shutdown occurs after approximately 3 minutes.
  • Low-battery warning: The unit provides a visual and audible warning when battery voltage becomes too low for reliable operation.
  • Compact pen-style construction: Lightweight design makes it convenient to carry in an electrician's tool pouch, pocket or toolbox.
  • Professional safety category: SATA documentation specifies CE CAT III 1000V / CAT IV 600V for the 62702A.

Technical Specifications

Specification Details
Brand SATA
Product Code 62702A
Product Type High Precision Non-Contact Voltage Detector
Measuring Type Non-Contact AC Voltage Detection
Standard Detection Range Approx. 48–1000V AC
Extended Sensitivity Range Approx. 12–1000V AC
AC Frequency 50Hz / 60Hz
Signal Indication Sound + LED Light
Low Signal Green
Medium Signal Yellow
High Signal Red
Sensitivity Adjustable / Extension Function
Live/Neutral Identification Yes
Breakpoint Detection Yes
Automatic Sensing Yes
Auto Power-Off Yes
Low Battery Warning Yes
Flashlight White LED
Battery 2 × 1.5V AAA batteries
Operating Temperature 0°C to 40°C
Storage Temperature -10°C to 50°C
Dimensions Approx. 162 × 23 × 27 mm
Weight Approx. 48 g including battery
Safety Category CE CAT III 1000V / CAT IV 600V
Application Indoor electrical voltage detection

The above specifications are based primarily on SATA's 62702A instruction manual. Some older SATA product pages for the related 62702 model list different dimensions and battery specifications, so the 62702A manual should be used as the reference for the 62702A-specific specifications.

High-Precision Sensitivity Control

One of the main advantages of the SATA 62702A is its adjustable sensitivity system. In normal operation, the detector operates with a voltage detection range of approximately 48–1000V AC. Pressing the sensitivity-extension control activates the lower-voltage detection range of approximately 12–1000V AC. Pressing the control again returns the tester to its standard sensitivity setting.

This provides greater flexibility when working with different electrical systems.

The higher-sensitivity setting is useful where lower-voltage signals need to be detected. The lower-sensitivity setting can be useful where several conductors are positioned close together and excessive sensitivity could make conductor identification more difficult.

Three-Level Voltage Signal Indication

The 62702A provides three visual levels corresponding to the detected signal intensity:

Detected Signal LED Indication
Low Green
Medium Yellow
High Red

The tester also provides audible warnings together with the visual indication. This allows the user to recognize a detected electrical signal without continuously watching the indicator.

The three-stage indication is particularly useful during electrical troubleshooting because it provides more information than a simple ON/OFF voltage indication.

Non-Contact Electrical Detection

The tester is designed to detect an AC electrical field around an energized conductor without requiring the insulation to be removed. This makes it useful for preliminary inspection of insulated wires, cables, electrical sockets and other accessible electrical components.

The non-contact design provides several practical advantages:

  • No need to strip wire insulation for preliminary detection
  • Reduced need for direct contact with conductors
  • Faster inspection of multiple cables
  • Convenient identification of energized wiring
  • Useful for electrical maintenance and troubleshooting
  • Suitable for checking accessible sockets and electrical points

Live and Neutral Wire Identification

The sensitivity adjustment can also assist with identifying the live and neutral conductors in suitable AC wiring arrangements. When the detector is placed close to separated conductors, the live conductor normally produces a stronger detected signal than the neutral conductor.

This function can be useful during wiring inspection, socket testing and electrical maintenance. However, conductor identification should always be confirmed using an appropriate approved testing method when electrical isolation or definitive circuit identification is required.

Breakpoint Detection

The SATA 62702A can assist in locating a breakpoint or interruption in an energized wire. By moving the detector along the cable and observing changes in the detected signal, a technician may identify an area where the electrical field changes or disappears.

This makes the tester useful for preliminary troubleshooting of:

  • Extension cables
  • Electrical wiring
  • Power cords
  • Insulated conductors
  • Workshop wiring
  • Building electrical circuits

Breakpoint detection is an inspection aid and should not be treated as a substitute for continuity testing with properly rated test equipment.

Built-In LED Flashlight

The 62702A incorporates a white LED flashlight that can be operated independently while the detector is powered on. This is useful when inspecting wiring inside dark electrical panels, cabinets, machinery compartments or other confined work areas.

The integrated lighting function means the user does not necessarily need to carry a separate flashlight for basic inspection work.

Automatic Power-Off

To conserve battery life, the 62702A incorporates an automatic shutdown function.

When the tester detects no voltage signal and receives no operation for approximately 5 minutes, it automatically switches off. When the flashlight is operating, the unit switches off after approximately 3 minutes, regardless of whether a voltage signal is detected.

This feature is particularly useful for technicians who carry the tester in a tool pouch and may occasionally forget to switch it off after use.

Low-Battery Protection

The 62702A includes a low-battery warning system. According to the SATA manual, when the battery voltage falls below approximately 2.6V, the power indicator flashes three times and the tester provides an audible warning before switching off.

This helps prevent continued operation with insufficient battery power, which could compromise the reliability of voltage detection.

Compact and Portable Design

The SATA 62702A has an approximate body size of 162 × 23 × 27 mm and weighs approximately 48 g including batteries.

Its pen-style design makes it convenient for:

  • Electricians
  • Electrical contractors
  • Maintenance technicians
  • Industrial service personnel
  • Building maintenance teams
  • Workshop technicians
  • Electrical installation workers

The tester can be carried easily in a pocket, tool pouch or toolbox and kept available for quick voltage checks.

Typical Applications

The SATA 62702A is suitable for a wide range of professional and general electrical inspection applications:

  • Electrical wiring inspection
  • AC voltage detection
  • Live wire identification
  • Neutral wire identification
  • Electrical socket inspection
  • Cable testing
  • Wire breakpoint detection
  • Electrical troubleshooting
  • Building maintenance
  • Factory maintenance
  • Industrial electrical inspection
  • Control panel inspection
  • Machinery maintenance
  • Power cord inspection
  • Electrical installation work
  • Workshop maintenance
  • Preliminary voltage verification

Advantages for Electricians

The SATA 62702A provides several useful functions in a single compact instrument. Its combination of non-contact voltage detection, adjustable sensitivity, three-level LED indication, audible alarm, live/neutral identification, breakpoint detection, flashlight, low-battery warning and automatic shutdown makes it particularly useful for routine electrical inspection.

The ability to switch between approximately 48–1000V AC standard detection and 12–1000V AC extended sensitivity allows the same tester to be adapted to different testing situations.

The integrated flashlight and automatic power management further improve its practicality for field service work.

Safety Features

The SATA 62702A is designed with several features intended to support safer electrical inspection:

  • Non-contact voltage detection
  • CE safety classification
  • CAT III 1000V / CAT IV 600V rating specified in the SATA manual
  • Adjustable sensitivity
  • Audible and visual warning
  • Three-level signal indication
  • Low-battery warning
  • Automatic power-off
  • Insulated pen-style housing

The non-contact design reduces the need for direct contact with energized conductors during preliminary voltage detection.

Important Safety Precautions

The 62702A should be used strictly according to the manufacturer's instructions. A non-contact voltage detector is primarily a voltage presence detector, not a substitute for a properly rated two-pole voltage tester or multimeter when proving that a circuit is de-energized.

Before each use:

  1. Inspect the tester for physical damage.
  2. Confirm that the power indicator and self-check function operate correctly.
  3. Test the detector against a known energized source.
  4. Select an appropriate sensitivity level.
  5. Keep the tester within its specified operating environment.
  6. Do not use a damaged or malfunctioning detector.
  7. Follow all applicable electrical isolation and PPE procedures.

Particular care should be taken when using the high-sensitivity setting because nearby energized conductors can influence the detected signal.

Product Highlights

SATA 62702A High Precision Non-Contact Electrical Measuring Pen is a compact professional AC voltage detector offering approximately 12–1000V AC extended detection, 48–1000V AC standard detection, adjustable sensitivity, three-level voltage signal indication, audible and visual alarms, live/neutral identification, breakpoint detection, automatic sensing, built-in white LED flashlight, low-battery warning and automatic power-off. With its compact approximately 162 × 23 × 27 mm design and 48 g weight, it is well suited to electricians, electrical contractors, maintenance technicians and industrial service personnel.



 Inquiry - SATA HIGH PRECISION NON-CONTACT ELECT. MEASURING PEN - 62702A