The SATA AE5923 Mini COB Worklight is a compact rechargeable LED work light designed for automotive repair, machinery maintenance, electrical work, workshop servicing and general inspection tasks. Its miniature form factor makes it easy to carry in a toolbox, workwear pocket or service bag, while the COB LED light source provides up to 240 lumens for illuminating dark and confined working areas. The light offers two brightness levels, 240 lm and 80 lm, and features a strong magnet on the bottom for hands-free attachment to suitable ferrous surfaces.
Key Features
- Miniature and portable design for easy carrying and storage.
- COB LED light source provides broad illumination for close-range work and inspection.
- 240 lumens maximum brightness for general work lighting.
- 80 lumens low-brightness mode for lower light requirements and extended operation.
- Two brightness levels allow users to select the appropriate illumination for different tasks.
- Strong bottom magnet allows the light to be attached to steel machinery, vehicle body panels, tool cabinets and other ferrous surfaces.
- Hands-free operation when mounted magnetically.
- Built-in rechargeable lithium battery provides convenient cordless operation.
- Approximately 2.5-hour charging time.
- Compact 89 mm body length makes it suitable for pockets, toolboxes and service bags.
- Lightweight construction of approximately 40 g.
- Suitable for automotive technicians, electricians, mechanics, maintenance personnel and DIY users.
- Designed for quick illumination in areas where a conventional work light is too large.
Technical Specifications
| Specification | Details |
|---|---|
| Brand | SATA |
| Model | AE5923 |
| Product Type | Mini COB Worklight |
| Light Source | COB LED |
| Maximum Brightness | 240 lm |
| Low Brightness | 80 lm |
| Brightness Levels | 2 |
| Battery | Built-in Rechargeable Lithium Battery |
| Charging Time | Approx. 2.5 hours |
| Maximum Working Time | Approx. 1.3 hours |
| Length | 89 mm |
| Width | 23 mm |
| Height | 17.5 mm |
| Net Weight | Approx. 0.04 kg / 40 g |
| Magnetic Base | Yes |
| Magnet Position | Bottom |
| Application | Automotive, Workshop, Maintenance, Inspection |
SATA catalogue information specifies the AE5923 at 89 × 23 × 17.5 mm, 240 lm, approximately 1.3 hours working time, 2.5 hours charging time and approximately 0.04 kg net weight.
Compact Miniature Design
The AE5923 is designed around portability. At only 89 mm long, the work light is small enough to carry together with everyday hand tools without taking up significant toolbox space.
Its compact dimensions make it particularly useful when a technician needs a light source immediately available while working.
It can be conveniently carried in:
- Toolboxes
- Tool bags
- Workwear pockets
- Service carts
- Vehicle maintenance kits
- Electrical tool cases
- Workshop drawers
The small body also allows the light to be positioned in areas where larger inspection lamps may be difficult to place.
COB LED Illumination
The AE5923 uses COB LED technology and provides up to 240 lumens of illumination. SATA identifies it as a lithium-battery mini COB work light.
COB illumination is well suited to close-range maintenance because it produces a broad area of light rather than relying solely on a narrow spotlight.
Typical applications include:
- Illuminating engine compartments
- Inspecting machinery
- Working inside cabinets
- Checking electrical panels
- Lighting automotive components
- Inspecting dark corners
- General maintenance work
Two Brightness Levels
The AE5923 provides two illumination levels:
- 240 lm – High brightness
- 80 lm – Low brightness
This allows the user to choose between maximum illumination and a lower output when less light is required.
The high setting is useful when working in dark areas, while the lower setting can be used for close-up inspection or situations where excessive brightness is unnecessary.
Strong Magnetic Base
One of the most useful features of the AE5923 is the strong magnet located at the bottom of the light. SATA's product information specifically identifies the bottom strong magnet as a key feature.
The magnetic base allows the light to be attached to suitable ferrous surfaces such as:
- Vehicle body panels
- Steel machinery
- Tool cabinets
- Workshop benches
- Steel frames
- Equipment housings
- Maintenance panels
- Automotive components
Once attached, the light can provide illumination without requiring the technician to hold it continuously.
Hands-Free Workshop Lighting
The magnetic base is particularly useful when both hands are required for a repair.
For example, a technician can attach the AE5923 to a suitable steel surface near the work area and use both hands to:
- Operate hand tools
- Tighten fasteners
- Inspect components
- Perform electrical work
- Repair machinery
- Replace automotive parts
- Carry out routine maintenance
This makes the AE5923 useful as a compact supplementary work light rather than simply a conventional flashlight.
Rechargeable Battery
The AE5923 uses a built-in rechargeable lithium battery, eliminating the need for regular disposable batteries. SATA's catalogue identifies the product as a lithium-powered mini COB work light.
The specified charging time is approximately 2.5 hours.
Rechargeable operation provides several practical advantages:
- No disposable batteries required
- Lower ongoing operating cost
- Convenient workshop charging
- Ready for repeated daily use
- Suitable for mobile technicians
- Easy to keep in a vehicle or toolbox
Working Time
The SATA catalogue specifies approximately 1.3 hours of working time for the AE5923.
Portable Inspection Light
Because of its approximately 40 g weight, the AE5923 is easy to carry throughout the working day.
It can function as a personal inspection light that is always available when a technician needs additional illumination.
Its compact dimensions are particularly advantageous compared with larger rechargeable work lights when the main requirement is portability.
Advantages of the SATA AE5923
Compact size: At only 89 mm long, it is easy to carry and store.
High output: 240 lm maximum brightness provides useful illumination for close-range maintenance.
Two brightness modes: 240 lm and 80 lm settings provide flexible lighting control.
Magnetic base: Enables hands-free lighting on suitable ferrous surfaces.
Rechargeable: Built-in lithium battery eliminates disposable batteries.
Fast charging: Approximately 2.5-hour charging time.
Lightweight: Approximately 40 g for easy everyday carrying.
COB illumination: Provides broad close-range work lighting.
Versatile: Suitable for automotive, electrical, mechanical and general maintenance work.
Product Applications
The SATA AE5923 can be used for:
- Automotive repair
- Vehicle inspection
- Engine maintenance
- Electrical repair
- Machinery servicing
- Industrial maintenance
- Workshop inspection
- Equipment installation
- Garage work
- DIY projects
- General troubleshooting
Usage Recommendations
For maximum usefulness, select the appropriate brightness level according to the work environment.
Use the 240 lm setting when stronger illumination is required for dark areas or general work lighting.
Use the 80 lm setting for close-range inspection or when lower illumination is sufficient.
When using the magnetic base, ensure that the mounting surface is clean, flat enough and made from a suitable ferrous material. The magnet is intended for attachment and positioning of the light and should not be treated as a lifting device.
Maintenance and Care
To maintain the AE5923:
- Keep the LED lens clean.
- Remove metal particles from the magnetic base.
- Keep the charging connection clean and dry.
- Avoid dropping or striking the light.
- Do not expose the unit unnecessarily to extreme heat.
- Recharge the battery using a compatible charging method.
- Store the light in a dry location when not in use.
- Do not use the magnetic base to lift heavy objects.
Product Highlights
The SATA AE5923 Mini COB Worklight is a compact rechargeable inspection and maintenance light delivering 240 lumens maximum output with an additional 80-lumen low-brightness mode. Its COB LED, built-in lithium battery, strong bottom magnet and compact 89 × 23 × 17.5 mm body make it particularly practical for automotive repair, electrical work, machinery maintenance and workshop inspection. With approximately 1.3 hours of operating time and 2.5 hours charging time, it provides a convenient portable lighting solution for technicians who need hands-free illumination in confined work areas.
Inquiry - SATA MINI COB WORKLIGHT - AE5923