B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


SATA DIGITAL CLAMP MULTIMETER - 05221



The SATA 05221 Digital Clamp Multimeter is a compact electrical testing instrument designed for AC current measurement, AC/DC voltage testing, resistance measurement, diode testing and circuit continuity checking. Its clamp-style current measurement allows AC current to be measured without disconnecting the conductor, making it useful for electrical troubleshooting, appliance servicing, automotive electrical work, circuit maintenance and general workshop applications. The meter uses a 3½-digit LCD with a maximum reading of 1999 and can accommodate conductors up to approximately 25 mm in diameter.

Key Features

  • Digital clamp meter design allows AC current measurement without disconnecting the conductor.
  • 3½-digit LCD display provides readings up to 1999.
  • Measures AC voltage up to 300V.
  • Measures DC voltage up to 300V.
  • Measures AC current across 20A, 200A and 400A ranges.
  • Measures resistance on 2kΩ and 200kΩ ranges.
  • Diode test function for checking semiconductor components.
  • Continuity test function with audible buzzer.
  • Full-scale overload protection helps protect the instrument during measurement.
  • Over-range buzzer/alarm provides an audible warning.
  • HOLD function allows the current reading to be retained on the LCD.
  • Clamp accommodates conductors up to approximately Ø25 mm.
  • Sharp stainless-steel test probes are suitable for electrical and electronic testing.
  • Compact design suitable for toolboxes, service bags and electrical maintenance kits.

Technical Specifications

Specification Details
Brand SATA
Model 05221
Product Type Digital Clamp Multimeter
Display 3½-Digit LCD
Maximum Display 1999
AC Voltage 300V
DC Voltage 300V
AC Current 20A / 200A / 400A
Resistance 2kΩ / 200kΩ
Diode Test Yes
Continuity Test Yes
Maximum Measurable Conductor Ø25 mm
Maximum Clamp Jaw Opening Approx. Ø27 mm
Sampling Rate Approx. 3 readings/sec
AC Voltage Frequency Response 40–400Hz
AC Current Frequency 50–60Hz
Input Impedance 9MΩ
Battery 3 × CR2032, 3V
Operating Temperature 0°C–40°C
Storage Temperature -20°C–60°C
Dimensions 151 × 65 × 34 mm
Weight Approx. 127 g including batteries

The detailed 05221 manual specifies the 151 × 65 × 34 mm dimensions, approximately 127 g weight, 3 × CR2032 batteries, Ø27 mm maximum jaw opening and Ø25 mm maximum recommended conductor size.

AC Current Measurement

The primary advantage of a clamp multimeter is the ability to measure current without physically disconnecting the conductor.

The SATA 05221 provides AC current ranges of:

  • 20A
  • 200A
  • 400A

The maximum specified AC current is 400A, with 50–60Hz frequency response.

To measure current, the conductor is placed inside the clamp jaw and the jaws are closed around it. For more accurate readings, the conductor should be positioned approximately in the centre of the clamp jaws.

This is useful for checking:

  • Motor current
  • Appliance current
  • Electrical loads
  • AC circuits
  • Workshop equipment
  • Machinery
  • Power cables

300V AC/DC Voltage Measurement

The 05221 can measure both AC and DC voltage up to 300V.

This makes it useful for basic voltage checks on electrical circuits and equipment.

Typical applications include:

  • Power supply testing
  • Electrical circuit troubleshooting
  • Battery-related DC checks
  • Appliance maintenance
  • Control circuits
  • Automotive electrical systems
  • Workshop equipment

The manual specifies a 9MΩ input impedance for voltage measurement.

Resistance Measurement

The meter provides two resistance ranges:

  • 2kΩ
  • 200kΩ

Resistance testing can be used for checking electrical components, wiring and circuits during troubleshooting.

Typical applications include:

  • Checking resistors
  • Testing wiring
  • Identifying open circuits
  • Checking electrical components
  • Troubleshooting control circuits
  • General electronic maintenance

For resistance measurement, the circuit under test should be de-energized and high-voltage capacitors discharged before testing.

Diode Testing

The SATA 05221 includes a dedicated diode test function. The instrument applies a test voltage and displays the approximate forward voltage of the diode.

This is useful for basic semiconductor troubleshooting and electronic circuit maintenance.

Continuity Testing

The built-in continuity function provides an audible buzzer when the measured resistance is approximately 30Ω or less.

This makes it convenient for quickly checking whether a circuit path is electrically continuous.

Common applications include:

  • Cable testing
  • Fuse checking
  • Switch testing
  • Connector testing
  • Wiring troubleshooting
  • Circuit maintenance

3½-Digit LCD Display

The 05221 uses a 3½-digit LCD display with a maximum reading of 1999. The sampling rate is approximately three readings per second.

The digital display provides clear numerical readings for routine electrical measurements.

The meter also provides an over-range indication, with the display showing "1" when the selected range is exceeded.

HOLD Function

The front-panel HOLD button allows the current measurement to be retained on the LCD. Pressing the button freezes the displayed reading, making it easier to record a measurement when the meter cannot be viewed continuously.

This can be useful when:

  • Working inside electrical cabinets
  • Measuring in confined spaces
  • Testing equipment at awkward angles
  • Recording readings during maintenance
  • Taking measurements where the display is difficult to see

Overload Protection

The SATA 05221 incorporates full-scale overload protection and an over-range warning system.

The protection is intended to reduce the risk of damage from inappropriate measurement conditions, but users must still select the correct function and range before testing.

The manual specifies the instrument for CAT III 300V measurement environments and emphasizes following the applicable electrical safety procedures.

Clamp Jaw Design

The clamp jaw is designed to surround a conductor for AC current measurement without requiring the circuit to be opened.

Specifications include:

  • Maximum jaw opening: approximately Ø27 mm
  • Recommended maximum measurable conductor: approximately Ø25 mm

The conductor should be positioned centrally within the jaws for improved measurement accuracy.

Compact and Portable Design

The SATA 05221 measures approximately 151 × 65 × 34 mm and weighs around 127 g including batteries according to the detailed manual.

Its compact design makes it convenient for:

  • Electrical toolboxes
  • Technician service bags
  • Automotive tool kits
  • Workshop drawers
  • Maintenance carts
  • Field-service equipment

The relatively low weight is useful for technicians who need to carry a measuring instrument throughout the working day.

Battery Powered

The 05221 is powered by three CR2032 3V batteries. The instrument includes a low-battery indication on the LCD to alert the user when battery replacement is required.

The battery compartment should be maintained according to the manufacturer's instructions, and batteries should be replaced with the correct type.

Electrical Applications

The SATA 05221 is suitable for basic electrical testing and troubleshooting, including:

  • AC current measurement
  • AC voltage testing
  • DC voltage testing
  • Resistance testing
  • Continuity checking
  • Diode testing
  • Electrical appliance testing
  • Circuit maintenance

It can be used by electricians, maintenance technicians and workshop personnel for routine diagnostic work.

Automotive Applications

The meter can also be used for automotive electrical troubleshooting.

Potential applications include:

  • Battery voltage checks
  • Charging-system checks
  • Electrical circuit testing
  • Fuse and wiring checks
  • Continuity testing
  • Component resistance checks
  • General vehicle electrical diagnostics

The clamp function is primarily intended for AC current, so it should not be treated as a DC-current clamp meter.

Appliance and Equipment Testing

The SATA 05221 can be used to check electrical appliances and small electronic components, as well as for circuit maintenance.

Typical applications include:

  • Motors
  • Pumps
  • Electrical appliances
  • Workshop equipment
  • Small electronic components
  • Power circuits
  • Control circuits

Safety Considerations

The SATA 05221 is specified as a CAT III 300V measuring instrument.

For safe operation:

  • Inspect the meter and test leads before use.
  • Do not use a damaged instrument.
  • Select the correct measurement function before testing.
  • Do not exceed the specified voltage or current limits.
  • Keep fingers behind the probe guards.
  • Do not touch exposed conductors during measurement.
  • Disconnect power before resistance, diode or continuity testing.
  • Discharge high-voltage capacitors before resistance or continuity measurements.
  • Keep the conductor correctly positioned within the clamp jaws.
  • Follow the instrument's operating manual and applicable electrical safety requirements.

The 05221 manual specifically warns that measuring signals above the specified voltage/current limits can create hazardous conditions even if the display appears to provide a reading.

Product Advantages

Clamp current measurement: Measures AC current without disconnecting the conductor.

Multiple measurement functions: Voltage, current, resistance, diode and continuity testing in one instrument.

400A AC range: Suitable for a range of routine AC current measurements.

300V AC/DC voltage: Provides basic voltage diagnostic capability.

Ø25 mm conductor capacity: Accommodates many common electrical conductors.

1999 maximum display: Clear 3½-digit digital measurement.

HOLD function: Retains readings for easier recording.

Continuity buzzer: Provides quick audible circuit checks.

Overload protection: Adds protection against measurement errors.

Compact size: Easy to carry in a toolbox or service bag.

Product Applications

The SATA 05221 Digital Clamp Multimeter is suitable for:

  • Electrical maintenance
  • AC current measurement
  • Appliance servicing
  • Automotive electrical diagnostics
  • Machinery maintenance
  • Motor testing
  • Workshop equipment inspection
  • Circuit troubleshooting
  • Wiring checks
  • Resistance measurement
  • Diode testing
  • Continuity testing
  • General electrical repair

Product Highlights

The SATA 05221 Digital Clamp Multimeter is a compact multi-function electrical testing instrument combining AC clamp-current measurement, AC/DC voltage measurement, resistance testing, diode testing and continuity checking. It features a 3½-digit LCD with 1999 maximum reading, 20A/200A/400A AC current ranges, 300V AC/DC voltage measurement, 2kΩ/200kΩ resistance ranges and a Ø25 mm maximum measurable conductor size. Its HOLD function, audible continuity buzzer, overload protection and compact 151 × 65 × 34 mm design make it suitable for electricians, mechanics, maintenance technicians and workshop users performing routine electrical diagnostics.



 Inquiry - SATA DIGITAL CLAMP MULTIMETER - 05221