The SATA AE5827L 6-Ton Jack Stands are heavy-duty vehicle support stands designed for professional automotive workshops, vehicle maintenance, mechanical repair, fleet servicing and heavy-duty vehicle applications. Supplied as a pair, the stands feature heavy-duty steel construction, a reinforced base, quick height adjustment, a 10-position ratchet bar and a secondary safety-pin locking system. The model is also GS certified.
Key Features
- 6-ton rated capacity per pair.
- Supplied as 1 pair / 2 jack stands.
- Heavy-duty steel construction for demanding workshop use.
- 10 height-adjustment positions.
- Quick adjustment mechanism for faster setup.
- Multi-position ratchet bar provides controlled height adjustment.
- Safety locking pin helps prevent accidental lowering.
- Dual locking system using ratchet gear and safety pin.
- Reinforced/amplified base improves stability.
- Welded leg bases provide additional structural rigidity.
- Cast-iron support bar with curved support surface.
- Designed for professional automotive maintenance.
- GS certified.
Technical Specifications
| Specification | Details |
|---|---|
| Brand | SATA |
| Model | AE5827L |
| Catalogue Model | STAE5827L |
| Product Type | Heavy-Duty Jack Stand |
| Capacity | 6 Ton / Pair |
| Quantity | 2 Pieces / Pair |
| Minimum Height | 405mm |
| Maximum Height | 620mm |
| Height Adjustment | 215mm |
| Adjustment Positions | 10 |
| Base Size | 278 × 257mm |
| Stowed Height | Approx. 478mm |
| Construction | Heavy-Duty Steel |
| Locking System | Ratchet + Safety Pin |
| Support Bar | Cast Iron |
| Certification | GS Certified |
| Approx. Pair Weight | 14kg |
Current product specifications list the AE5827L at 405mm minimum height and 620mm maximum height, with a 278 × 257mm base. SATA's product information identifies the STAE5827L as a 6-ton model with a catalogue weight of approximately 14kg.
6-Ton Load Capacity
The AE5827L is designed for a 6-ton capacity per pair, providing a substantially higher support capacity than the SATA 3-ton AE5826L.
This makes the AE5827L suitable for heavier vehicles and demanding automotive support applications where a higher-capacity stand is required.
The stated capacity must not be exceeded. The vehicle must also be positioned correctly so that the load is distributed appropriately between the support stands.
A jack stand is a vehicle-support device, not a lifting device. A suitable, properly rated vehicle jack must be used to raise the vehicle before placing it onto the stands.
10-Position Height Adjustment
The AE5827L features a 10-position adjustable ratchet bar, allowing the operator to select an appropriate support height according to the vehicle and work being performed.
The available height range is approximately:
- Minimum: 405mm
- Maximum: 620mm
- Adjustment range: 215mm
The relatively high maximum height makes this model useful where greater under-vehicle clearance is required.
Quick Height-Adjustment System
The quick adjustment system allows the support height to be changed efficiently using the ratchet mechanism.
This is useful in workshops where different vehicles have different ground clearances.
Potential applications include:
- Brake servicing
- Suspension repairs
- Exhaust maintenance
- Undercarriage inspection
- Drivetrain work
- Vehicle servicing
- Mechanical repairs
The height should always be adjusted before the vehicle load is transferred onto the stand.
Dual Locking System
The AE5827L uses a ratchet gear and safety pin as a dual locking system.
The ratchet bar provides the primary height adjustment and locking function, while the safety pin provides a separate mechanical safeguard.
The safety pin is designed to help prevent unintended lowering of the support column after adjustment.
This configuration provides an additional layer of mechanical security during vehicle-support operations.
Heavy-Duty Steel Construction
The jack stands use heavy-duty steel construction for durability in demanding automotive environments.
The robust construction makes the AE5827L suitable for repeated use in:
- Professional workshops
- Vehicle service centres
- Fleet maintenance facilities
- Mechanical repair shops
- Heavy-duty maintenance areas
- Commercial garages
Steel construction provides the structural strength necessary for the product's rated support capacity when used correctly.
Reinforced Base
The AE5827L incorporates an amplified/reinforced base designed to improve stability.
The base measures approximately 278 × 257mm, providing a broad footprint compared with smaller jack stands.
A larger base helps distribute the supported load over a broader area and improves stability when the stand is positioned on a firm, level surface.
Welded Leg Bases
The stand features welded bases on the legs, which SATA specifies as a stability-enhancing construction feature.
The welded structure provides a rigid support framework suitable for repeated workshop use.
Before every application, the welds and structural components should be visually inspected for cracks, deformation or other damage.
Cast-Iron Support Bar
The AE5827L uses a cast-iron support bar with a curved base and central recess.
The shaped support provides a defined contact area between the jack stand and the vehicle's approved support point.
The stand should always be positioned according to the vehicle manufacturer's designated lifting/support locations.
GS Certification
The STAE5827L is GS certified, as indicated by SATA product information.
Heavy-Duty Vehicle Applications
The 6-ton capacity makes the AE5827L appropriate for heavier vehicles and applications requiring greater support capacity than a typical 2- or 3-ton jack stand.
Depending on the vehicle and manufacturer requirements, potential applications include:
- Larger passenger vehicles
- Light commercial vehicles
- Vans
- Heavy-duty workshop vehicles
- Fleet vehicles
- Commercial maintenance
The actual vehicle compatibility must always be determined by the vehicle's weight, axle loading, designated support points and the manufacturer's service requirements.
Stability and Support
The large 278 × 257mm base provides a broad support footprint.
For proper stability:
- Place the stand on a firm, level surface.
- Do not position it on loose gravel, soft soil or unstable flooring.
- Ensure the vehicle's approved support point is correctly aligned with the stand.
- Keep the stand vertical during use.
- Use a suitable pair of stands where required.
- Never exceed the rated capacity.
Important Safety Information
Jack stands should never be used as a substitute for a vehicle jack during lifting.
Correct procedure should generally involve:
- Park the vehicle on a firm, level surface.
- Apply the vehicle's parking brake and use wheel chocks where appropriate.
- Use a properly rated jack to raise the vehicle.
- Identify the vehicle manufacturer's approved support points.
- Set the AE5827L to the required height.
- Ensure the ratchet mechanism is properly engaged.
- Install and secure the safety pin.
- Position the stands correctly under the approved support points.
- Lower the vehicle slowly onto the stands.
- Confirm that the vehicle is stable before working underneath it.
Never work beneath a vehicle supported only by a hydraulic or mechanical jack.
Advantages of SATA AE5827L
6-ton capacity: Provides high-capacity vehicle support for demanding automotive applications.
Pair configuration: Supplied as two matched support stands.
620mm maximum height: Provides substantial under-vehicle working clearance.
405mm minimum height: Suitable for vehicles requiring a relatively high minimum support position.
10 adjustment positions: Allows flexible height selection.
215mm adjustment range: Provides substantial vertical adjustment.
Safety pin: Adds secondary mechanical protection against unintended lowering.
Ratchet locking mechanism: Provides quick and controlled height adjustment.
Reinforced 278 × 257mm base: Provides a broad support footprint.
Heavy-duty steel construction: Designed for professional workshop environments.
Cast-iron support bar: Provides a robust vehicle contact structure.
GS certified: Provides additional assurance regarding applicable safety requirements.
Recommended Applications
The SATA AE5827L 6T Jack Stands are suitable for:
- Automotive workshops
- Car repair centres
- Professional garages
- Fleet maintenance
- Commercial vehicle servicing
- Mechanical workshops
- Brake servicing
- Suspension repairs
- Exhaust system maintenance
- Undercarriage inspection
- Heavy-duty vehicle maintenance
- Home garages
- General automotive repair
Product Highlights
The SATA AE5827L 6T Jack Stands are a heavy-duty 2-piece vehicle support set with a 6-ton-per-pair capacity, designed for professional automotive maintenance and vehicle repair. The stands provide 10 height-adjustment positions from approximately 405mm to 620mm, with a 215mm adjustment range and a large 278 × 257mm reinforced base. The combination of a multi-position ratchet bar and secondary safety pin provides a dual locking system, while the heavy-duty steel construction, welded leg bases and cast-iron support bar provide a robust support structure. The AE5827L is GS certified and is suitable for automotive workshops, fleet maintenance, commercial vehicle servicing and heavy-duty vehicle support applications.
Inquiry - SATA JACK STANDS ( 6T ) - AE5827L