The SATA AE5861 4 Ton Porta Power Kit is a professional hydraulic body-repair and vehicle straightening system designed for automotive bodywork, chassis repair, panel alignment, frame correction and heavy-duty mechanical applications. With a 4,000kg rated hydraulic capacity, the kit combines a portable hydraulic pump and cylinder with interchangeable extension rods, heads, saddles and other accessories, allowing technicians to configure the hydraulic system according to the repair application.
The AE5861 features a chrome-plated pump core, imported hydraulic seals, cast-steel metal head components and a scraper-seal design intended to improve durability and resistance to harsh workshop environments.
Key Features
- 4-ton / 4,000kg rated hydraulic capacity.
- Portable hydraulic Porta Power system.
- Suitable for automotive body and chassis repair.
- Chrome-plated pump core for improved wear resistance.
- Imported hydraulic seals for reliable sealing performance.
- Cast-steel metal jack-head components.
- Scraper-seal design helps protect the hydraulic system from dust and contaminants.
- Hydraulic pump with manual operation.
- Interchangeable heads and extension components.
- Multiple head configurations for different pushing, spreading and positioning requirements.
- 120mm piston stroke.
- Pump height adjustable from approximately 268mm to 388mm.
- Compact portable design for workshop use.
- Supplied in a dedicated storage package.
- Suitable for professional automotive repair applications.
Technical Specifications
| Specification | Details |
|---|---|
| Brand | SATA |
| Model | AE5861 |
| Product Type | Porta Power Kit |
| Hydraulic Capacity | 4 Ton / 4,000kg |
| Minimum Pump Height | 268mm |
| Maximum Pump Height | 388mm |
| Piston Stroke | 120mm |
| Net Weight | 18.6kg |
| Gross Weight | 19.5kg |
| Package Size | Approx. 60 × 36 × 20cm |
| Pump Type | Manual Hydraulic |
| Pump Core | Chrome-Plated |
| Seal | Imported Hydraulic Seal |
| Head Components | Cast Steel |
| Application | Automotive Body & Chassis Repair |
The published SATA catalogue specifies 4,000kg rated capacity, 268mm minimum pump height, 388mm maximum pump height, 120mm piston rise, 18.6kg net weight and 19.5kg gross weight. The catalogue package size is 60 × 36 × 20cm.
4-Ton Hydraulic Capacity
The AE5861 is rated for a maximum hydraulic capacity of 4 tonnes / 4,000kg when used in the appropriate configuration.
The hydraulic system is intended for controlled force applications such as:
- Vehicle body straightening
- Chassis alignment
- Panel positioning
- Frame correction
- Component separation
- Structural pushing
- Mechanical positioning
- Automotive repair work
The actual capacity depends on the specific head/accessory configuration. SATA's loading table shows that different combinations of heads, rods and cylinder components have different allowable loads.
Hydraulic Pump
The AE5861 uses a manual hydraulic pump to generate the pressure required to operate the hydraulic cylinder.
The pump core is chrome plated, which SATA specifies as a feature intended to provide improved wear resistance.
The hydraulic pump provides the controlled force required for demanding repair operations without requiring an external power source.
This makes the Porta Power suitable for workshops where portability and independent operation are important.
Chrome-Plated Pump Core
The chrome-plated pump core is designed to improve resistance to wear during repeated hydraulic operation.
This is particularly useful in professional repair environments where the hydraulic system may be operated frequently.
The polished/chrome-plated surface also contributes to smooth movement of the hydraulic components when the system is maintained and operated correctly.
Imported Hydraulic Seals
The AE5861 uses imported seals designed to provide effective hydraulic sealing performance.
Good-quality seals are important in a hydraulic power system because they help maintain pressure and reduce the risk of hydraulic-fluid leakage.
Proper inspection and maintenance of seals and hydraulic connections remain essential for safe operation.
Cast-Steel Head Components
The metal jack-head accessories are manufactured from cast steel components, providing robust contact points for different hydraulic configurations.
The interchangeable components allow the technician to select an appropriate contact configuration according to whether the operation requires:
- Pushing
- Spreading
- Supporting
- Positioning
- Pressing
- Alignment
Scraper-Seal Design
The AE5861 incorporates a scraper-seal design intended to help protect the hydraulic system from harsh environmental conditions.
The scraper helps reduce the ingress of contaminants around the moving hydraulic components.
This is particularly useful in automotive body-repair environments where the equipment can be exposed to:
- Dust
- Metal particles
- Workshop debris
- Dirt
- Paint residue
120mm Piston Stroke
The hydraulic piston provides approximately 120mm of jacking/stroke movement.
This stroke provides the hydraulic movement required to generate controlled pushing or spreading force.
For bodywork and chassis applications, the stroke can be combined with the supplied extension components to achieve the required working configuration.
Adjustable Pump Height
The pump has a minimum height of approximately 268mm and a maximum height of approximately 388mm.
This provides approximately 120mm of vertical height adjustment.
The height range allows the pump and cylinder assembly to be positioned according to the available working space.
Interchangeable Head System
One of the main advantages of a Porta Power kit is its interchangeable accessory system.
The AE5861 can be configured with different hydraulic heads and extensions depending on the application. SATA's loading table identifies multiple combinations, including:
- Spreader
- Cylinder + square saddle + hanging foot
- Cylinder + base
- Base + connector + cylinder + round head
- Base + connector + cylinder + rod + rubber head
- Flat head
- Hanging foot
- Cylinder + extension rods + base
- Wedge head
- Square head
This allows one hydraulic power unit to perform multiple types of body-repair operations.
Head Combination and Capacity
The rated load is dependent on the accessory configuration.
SATA's loading information specifies the following examples:
| Head Combination | Rated Load – AE5861 |
|---|---|
| Spreader | 0.5 Ton |
| Cylinder + Square Saddle + Hanging Foot | 2 Ton |
| Cylinder + Base | 4 Ton |
| Base + Connector + Cylinder + Round Head | 4 Ton |
| Base + Connector + Cylinder + 1 Rod + Rubber Head | 0.5 Ton |
| Flat Head / Hanging Foot | 1 Ton |
| Cylinder + 2 Rods + Base | 1 Ton |
| Cylinder + 1 Rod + Wedge Head | 2 Ton |
| Cylinder + 4 Rods + Square Head | 0.2 Ton |
These figures are configuration-specific and should be followed when selecting accessories for a repair operation.
Automotive Body Repair
The SATA AE5861 is particularly useful for automotive body-repair applications where controlled hydraulic force is required.
Typical applications include:
- Body panel straightening
- Chassis correction
- Frame alignment
- Door-frame correction
- Structural component positioning
- Collision repair
- Panel separation
- Bent-component correction
- Vehicle body restoration
The interchangeable heads allow the operator to select a suitable contact point for the particular repair.
Chassis and Frame Alignment
The 4-ton hydraulic system can provide substantial controlled force for chassis and frame correction tasks when used with the correct accessory configuration.
The hydraulic cylinder can be positioned between suitable structural points to apply controlled pushing force.
This makes the AE5861 suitable for professional collision-repair workshops and mechanical body-repair facilities.
Spreading Applications
The Porta Power configuration can also be used for controlled spreading operations with the appropriate spreader attachment.
The catalogue specifies a 0.5-ton maximum loading for the spreader configuration.
The spreader is therefore intended for lower-capacity applications than the full 4-ton cylinder-and-base configuration.
Pushing Applications
The hydraulic cylinder can be configured with different heads to create a controlled pushing force.
Depending on the selected head combination, SATA specifies capacities ranging from 0.2 ton to 4 tons for the listed configurations.
This makes it important to select the correct accessory configuration before applying force.
Portable Workshop Design
The AE5861 has a net weight of approximately 18.6kg, making it practical to move around an automotive workshop.
Its compact package size of approximately 60 × 36 × 20cm also makes storage more convenient when the kit is not being used.
The portable configuration allows technicians to move the hydraulic equipment between repair bays as required.
Professional Automotive Applications
The SATA AE5861 is suitable for:
- Collision repair workshops
- Automotive body shops
- Chassis repair centres
- Vehicle restoration workshops
- Mechanical workshops
- Automotive service centres
- Fleet maintenance facilities
- General fabrication and repair environments
It is especially useful where controlled hydraulic pushing, spreading or positioning force is required.
Hydraulic System Durability
The combination of:
- Chrome-plated pump core
- Imported seals
- Cast-steel heads
- Scraper seal
- Robust hydraulic cylinder
- Interchangeable accessories
provides a configuration intended for repeated professional use.
Regular inspection of hydraulic hoses, seals, connections, cylinder surfaces and accessories is recommended before operation.
Important Safety Information
The AE5861 is a high-force hydraulic system and should be used only by trained operators familiar with hydraulic body-repair equipment.
Important precautions include:
- Never exceed the rated capacity for the selected accessory configuration.
- Check the loading table before selecting a head combination.
- Ensure the hydraulic cylinder is correctly aligned before applying force.
- Use only suitable, stable contact points.
- Do not apply side loads to the cylinder unless specifically permitted by the equipment design.
- Keep hands and body parts away from pinch points.
- Inspect hydraulic hoses, seals and connections before use.
- Do not use damaged hydraulic components.
- Never attempt to repair a pressurized hydraulic system.
- Release hydraulic pressure before changing accessories.
- Keep the work area clear of unnecessary personnel.
- Wear appropriate eye, hand and protective equipment.
- Never use the 4-ton rating for accessory combinations with lower specified capacities.
The 4-ton rating applies to the appropriate full-capacity configuration, not automatically to every attachment in the kit. SATA's configuration table specifies substantially lower capacities for several accessory combinations.
Advantages of SATA AE5861
4-ton hydraulic capacity: Provides substantial controlled force for professional automotive repair.
Portable design: The 18.6kg net weight allows convenient movement between work areas.
Chrome-plated pump core: Improves resistance to wear.
Imported seals: Designed to provide effective hydraulic sealing.
Cast-steel heads: Provide robust contact components.
Scraper seal: Helps protect hydraulic components against harsh workshop environments.
120mm piston stroke: Provides useful hydraulic movement.
Multiple accessory configurations: Allows the same hydraulic unit to perform different pushing and spreading operations.
Product Highlights
The SATA AE5861 4 Ton Porta Power Kit is a professional portable hydraulic repair system with a 4,000kg maximum rated capacity, designed for automotive body, chassis and mechanical repair applications. It features a chrome-plated pump core for improved wear resistance, imported hydraulic seals, cast-steel head components and a scraper-seal design for better protection in demanding workshop environments. The hydraulic system provides a 120mm piston stroke, with the pump adjustable from approximately 268mm to 388mm. Its interchangeable heads, extension rods, saddles and other accessories allow different configurations for pushing, spreading, positioning, chassis straightening and body repair. The kit weighs approximately 18.6kg net and is supplied in a compact 60 × 36 × 20cm package. Importantly, the allowable load varies according to the selected head combination, with SATA specifying capacities from 0.2 ton up to the full 4-ton rating for different configurations.
Inquiry - SATA 4 TON PORTA POWER KIT - AE5861