B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


SB TOOLS 12V SUPER-LITE BATTERY CHARGE (10AMP) - STM1210



Product Overview

The SB TOOLS 12V SUPER-LITE Battery Charger STM1210 is a professional automotive lead-acid battery charger designed for charging 12V batteries used in motorcycles, cars, trucks and other automotive applications. With a maximum charging current of 10 Amp and selectable Low/High charging modes, the STM1210 provides a practical solution for routine battery charging and workshop maintenance.

The charger operates from a 220–240V AC single-phase 50Hz power supply and provides 12V DC charging output for one 12V battery. It also features an integrated ampere meter for monitoring the charging current during operation.

Key Features

  • Model: STM1210
  • Series: SUPER-LITE Automotive Lead Acid Battery Charger
  • Charging Voltage: 12V DC
  • Battery Configuration: 1 × 12V battery
  • Maximum Charging Current: 10 Amp
  • Charging Mode: Low / High selectable
  • Input Voltage: 220–240V AC
  • Input Frequency: 50Hz
  • Input Supply: Single Phase
  • Input Protection: 2 Amp fuse
  • Output Protection: 15 Amp automatic fuse
  • Built-in Ampere Meter: Yes
  • Compact workshop design
  • Made in Malaysia

12V Battery Charging

The STM1210 is specifically designed for 12V automotive lead-acid batteries. It can be used for batteries found in motorcycles, passenger cars, trucks and other vehicles requiring a 12V charging system. The manufacturer/distributor descriptions also identify applications including larger batteries used in boats, camper trailers and caravans.

With a maximum output of 10 Amp, the STM1210 provides a higher charging capacity than the 5A STM1205 model, making it suitable when greater charging current is required for routine workshop battery servicing.

Low & High Charging Selection

The STM1210 incorporates Low and High selectable charging modes, allowing the operator to select the appropriate charging level for the battery and charging requirement. The charging selection is controlled through an accessible switch.

This selectable charging arrangement provides greater flexibility for workshops that service batteries of different capacities.

Built-In Ampere Meter

An integrated ampere meter provides a direct indication of the charging current. This allows the operator to monitor the charging process and observe the current being delivered to the battery during operation.

The meter is particularly useful during workshop battery servicing because technicians can monitor charging current without requiring a separate external current-measuring instrument.

Electrical Safety Protection

The STM1210 is equipped with separate input and output protection. Published specifications identify a 2 Amp input fuse and 15 Amp output automatic fuse. These protective devices are designed to help protect the charger and electrical circuit against excessive current conditions.

The protection system complements the charger's conventional transformer-style workshop design and provides an additional layer of electrical protection during normal charging operation.

Compact SUPER-LITE Design

The STM1210 has a compact footprint of approximately 160 × 210 × 120 mm and a published weight of approximately 5.0 kg. This makes it practical for installation or storage in automotive workshops, garages and battery service areas.

Its relatively compact construction allows the charger to be kept readily available for regular battery maintenance without occupying excessive workshop space.

Suitable Applications

The SB TOOLS STM1210 can be used for:

  • 12V automotive battery charging
  • Car battery charging and maintenance
  • Motorcycle battery charging
  • Truck and commercial vehicle battery servicing
  • Garage battery charging
  • Automotive workshop maintenance
  • Fleet battery maintenance
  • Battery service centres
  • Boat battery charging
  • Camper trailer and caravan battery applications
  • General 12V lead-acid battery charging

Automotive Workshop Applications

The STM1210 is suitable for automotive technicians and workshop operators who regularly need to recharge 12V batteries during vehicle servicing. It can be used before starting-system testing, electrical-system diagnosis, vehicle inspection or returning a serviced vehicle to operation.

The 10A maximum charging capability provides additional charging capacity for routine workshop applications, while the Low/High selection allows the charging level to be adjusted according to the battery and service requirement.

Technical Specifications

Specification Details
Product SUPER-LITE Automotive Lead Acid Battery Charger
Model STM1210
Battery Type Lead-Acid Battery
Charging Voltage 12V DC
Battery Configuration 1 × 12V
Maximum Charging Current 10 Amp
Charging Mode Low / High Selectable
Input Voltage 220–240V AC
Input Frequency 50Hz
Phase Single Phase
Input Fuse 2 Amp
Output Protection 15 Amp Automatic Fuse
Ampere Meter Built-In
Dimensions (H × W × D) 120 × 160 × 210 mm
Weight Approx. 5.0 kg
Country of Manufacture Malaysia

The core electrical and dimensional specifications above are consistent across the available product listings and SUPER-LITE technical documentation.

Benefits for Professional Workshops

The SB TOOLS STM1210 12V 10A Battery Charger provides several practical benefits:

  • 10A maximum charging current for efficient routine battery charging
  • 12V output for standard automotive battery systems
  • Low/High selectable charging modes for charging flexibility
  • Built-in ampere meter for monitoring charging current
  • 2A input fuse protection
  • 15A output automatic fuse protection
  • Compact and practical workshop dimensions
  • Suitable for motorcycles, cars, trucks and other 12V applications
  • Suitable for professional garages and automotive service workshops
  • Made in Malaysia

Safety and Usage Notes

  • Confirm that the battery is a compatible 12V lead-acid battery before charging.
  • Check battery polarity before connecting the charger.
  • Select the appropriate Low or High charging mode according to the battery and charging requirements.
  • Ensure the battery and charging area have adequate ventilation.
  • Keep sparks, flames and other ignition sources away from batteries during charging.
  • Do not use the charger if the power cable, charging leads, clamps or electrical components are damaged.
  • Follow the battery manufacturer's charging recommendations.
  • Disconnect the charger from the appropriate power supply before removing battery connections.
  • Do not use the charger for battery types or voltages outside its specified operating range.

Why Choose STM1210?

The SB TOOLS 12V SUPER-LITE Battery Charger STM1210 combines a 10 Amp maximum charging current, selectable Low/High charging modes, built-in ampere meter and electrical protection in a compact workshop charger. Its 12V configuration makes it suitable for routine charging and maintenance of automotive lead-acid batteries across motorcycles, cars, trucks and other 12V equipment.

SB TOOLS STM1210 is a practical professional solution for workshops requiring a reliable 12V 10A automotive battery charger for regular battery charging, servicing and maintenance.



 Inquiry - SB TOOLS 12V SUPER-LITE BATTERY CHARGE (10AMP) - STM1210