B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


SB TOOLS 12V~24V SUPER-LITE BATTERY CHARGER (20AMP) - STM2420



Product Overview

The SB TOOLS 12V~24V SUPER-LITE Battery Charger STM2420 is a heavy-duty automotive lead-acid battery charger designed for charging both 12V and 24V battery systems. With a maximum selectable charging current of 20 Amp, it provides higher charging capacity for automotive workshops, garages, fleet maintenance facilities and professional battery service applications.

The STM2420 operates from a 220–240V AC, single-phase 50Hz supply and provides selectable 12V DC or 24V DC charging output. The unit is equipped with a 5A input fuse and 25A output MCB for electrical protection.

Key Features

  • Model: STM2420
  • Series: SUPER-LITE Automotive Lead-Acid Battery Charger
  • Charging Voltage: 12V DC / 24V DC
  • Maximum Charging Current: 20 Amp
  • Charging Current: Selectable
  • Input Voltage: 220–240V AC
  • Input Supply: Single Phase, 50Hz
  • Input Protection: 5A Fuse
  • Output Protection: 25A MCB
  • Dimensions: 300 × 340 × 330 mm
  • Published Weight: 21.0 kg
  • Designed for professional automotive battery charging applications

12V and 24V Charging Capability

The STM2420 provides selectable 12V and 24V DC charging, making it suitable for workshops that service vehicles and equipment using different battery-system voltages. The SUPER-LITE specification identifies the unit as supporting a 12V DC to 24V DC output range with a maximum selectable charging current of 20A.

For 24V applications, the charger can be used with an appropriate 24V battery configuration. The SUPER-LITE operating documentation for the related STM2410 model describes 24V charging using 2 × 12V batteries or 4 × 6V batteries, illustrating the selectable-voltage battery configurations used within this charger series.

20 Amp Selectable Charging Current

The STM2420 delivers a maximum charging current of 20 Amp, with the charging current being selectable. This higher-current capacity makes it suitable for workshop environments where larger automotive batteries require routine charging and maintenance.

The selectable current allows the operator to adjust charging output according to the battery condition and charging requirements rather than operating continuously at the maximum available current.

Professional Battery Charging Design

The STM2420 is designed as part of the SUPER-LITE automotive lead-acid battery charger range. Its larger cabinet and 20A charging capacity make it suitable for professional workshop environments where battery charging is performed regularly.

The charger can be used during vehicle maintenance, battery servicing and electrical-system work where batteries need to be returned to an appropriate state of charge before further testing or vehicle operation.

Built-In Charging Controls

The SUPER-LITE charger design incorporates dedicated controls for battery charging. The related STM2410 operating documentation identifies a 12V/24V selector switch, ammeter and current adjustor, allowing the operator to select charging voltage, monitor charging current and adjust the charging rate.

These functions provide useful control during workshop battery charging, particularly when servicing batteries with different capacities and conditions.

Ammeter Monitoring

An ammeter is used in the SUPER-LITE charger operating design to indicate the instantaneous charging current. This allows the technician to observe the charging current while the battery is being charged.

Monitoring the charging current provides useful information about the battery's charging condition and helps the operator select an appropriate charging rate.

Electrical Safety Protection

The STM2420 incorporates dedicated input and output protection. Published specifications identify a 5A input fuse and 25A output MCB.

The output MCB provides protection for the charging circuit and can isolate the load when an output short circuit is detected. The SUPER-LITE operating documentation also identifies reverse battery connection indication as part of the charger control system.

Heavy-Duty Workshop Construction

With published dimensions of approximately 300mm high × 340mm wide × 330mm deep and a listed weight of 21.0kg, the STM2420 is substantially larger than the lower-output STM2410 model.

Its larger cabinet is appropriate for professional automotive workshops, service centres and dedicated battery charging areas where a higher-capacity charger is required.

Suitable Applications

The SB TOOLS STM2420 can be used for:

  • 12V automotive battery charging
  • 24V automotive battery charging
  • Car and light commercial vehicle battery servicing
  • Truck and commercial vehicle battery maintenance
  • Fleet battery charging
  • Automotive repair workshops
  • Garage battery charging stations
  • Battery service centres
  • Workshop electrical-system maintenance
  • Professional lead-acid battery charging
  • General 12V/24V battery maintenance applications

Automotive Workshop Applications

The STM2420 is suitable for mechanics, automotive technicians and fleet maintenance personnel who regularly charge 12V and 24V lead-acid batteries.

Typical workshop applications include charging batteries after prolonged vehicle storage, preparing batteries for starting-system testing, maintaining fleet vehicles and restoring battery charge during electrical-system servicing.

Its 20A maximum charging capacity provides a higher-output solution for workshops that require more charging capability than 10A or 15A battery chargers.

Technical Specifications

Specification Details
Product SUPER-LITE Automotive Lead-Acid Battery Charger
Model STM2420
Charging Voltage 12V DC / 24V DC
Maximum Charging Current 20 Amp
Charging Current Selectable
Input Voltage 220–240V AC
Input Frequency 50Hz
Phase Single Phase
Input Protection 5A Fuse
Output Protection 25A MCB
Dimensions (H × W × D) 300 × 340 × 330 mm
Weight Approx. 21.0 kg
Battery Application 12V / 24V Lead-Acid Battery

Specifications are based on SUPER-LITE technical documentation and current SB TOOLS product information.

Benefits for Professional Workshops

The SB TOOLS STM2420 12V~24V 20A Battery Charger offers several practical advantages:

  • 12V and 24V selectable charging for greater application flexibility
  • 20A maximum charging current for higher-capacity battery charging
  • Selectable charging current for controlled battery servicing
  • Ammeter monitoring for observing charging current
  • 5A input fuse protection
  • 25A output MCB protection
  • Suitable for professional automotive workshops
  • Suitable for fleet and commercial vehicle maintenance
  • Designed for routine lead-acid battery charging
  • Heavy-duty charger format for regular workshop use

Safety and Usage Notes

  • Confirm whether the battery system requires 12V or 24V charging before operation.
  • Select the correct charging voltage before connecting the battery.
  • Check battery polarity carefully before connecting the charging leads.
  • Select an appropriate charging current according to the battery manufacturer's specifications.
  • Monitor the charging process and battery condition during operation.
  • Ensure adequate ventilation around the battery while charging.
  • Keep sparks, flames and other ignition sources away from batteries during charging.
  • Do not operate the charger with damaged cables, plugs, clamps or electrical components.
  • Disconnect the charger from the appropriate power supply before removing battery connections.
  • Do not use the STM2420 for battery voltages or battery types outside its specified operating range.

Why Choose STM2420?

The SB TOOLS 12V~24V SUPER-LITE Battery Charger STM2420 combines dual-voltage charging, selectable 20A charging current, charging-current monitoring and dedicated electrical protection in a heavy-duty workshop charger. Its 12V/24V capability allows one charger to service different automotive battery systems, while the higher 20A output provides greater charging capacity for professional maintenance operations.

SB TOOLS STM2420 is a professional solution for automotive workshops, garages, fleet maintenance facilities and service centres requiring a 12V~24V, 20A lead-acid battery charger for regular battery charging, servicing and maintenance.



 Inquiry - SB TOOLS 12V~24V SUPER-LITE BATTERY CHARGER (20AMP) - STM2420