B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


SB TOOLS 6V~48V SUPER-LITE BATTERY CHAEGER (10AMP) - STM4810



Product Overview

The SB TOOLS 6V~48V SUPER-LITE Battery Charger STM4810 is a professional automotive lead-acid battery charger designed to charge batteries and battery configurations from 6V up to 48V DC. With a maximum charging current of 10 Amp, the STM4810 provides broad voltage compatibility for automotive workshops, garages, fleet maintenance facilities and battery service applications.

The STM4810 operates from a 220–240V AC, single-phase 50Hz mains supply and features selectable charging voltage, adjustable charging current, an ammeter and output protection.

Key Features

  • Model: STM4810
  • Series: SUPER-LITE Automotive Lead Acid Battery Charger
  • Charging Voltage: 6V–48V DC
  • Maximum Charging Current: 10 Amp
  • Charging Current: Adjustable/selectable
  • Input Voltage: 220–240V AC
  • Input Supply: Single Phase, 50Hz
  • Input Protection: 5A Fuse
  • Output Protection: 15A MCB
  • Voltage Selection: 6V / 12V / 24V / 36V / 48V
  • Built-In Ammeter: Yes
  • Current Adjustor: Yes
  • Charging Cables: Included as part of the charger assembly
  • Dimensions: Approx. 300 × 340 × 330 mm
  • Weight: Approx. 16.5 kg

Wide 6V~48V Charging Range

A major feature of the STM4810 is its 6V to 48V DC selectable charging range. The voltage selector provides settings for 6V, 12V, 24V, 36V and 48V, allowing one charger to support multiple lead-acid battery configurations.

This makes the STM4810 particularly useful for workshops that service vehicles, equipment and battery systems with different operating voltages and do not want to rely on separate chargers for each voltage category.

10 Amp Charging Capacity

The STM4810 provides a maximum charging current of 10 Amp. The charging current can be adjusted to match the battery's condition and charging requirements rather than continuously operating at maximum output.

The adjustable charging function provides greater flexibility when servicing different battery capacities and configurations.

Built-In Voltage Selector

The charger incorporates a dedicated voltage selector switch with selectable positions for:

  • 6V
  • 12V
  • 24V
  • 36V
  • 48V
  • OFF

The operator can select the appropriate charging voltage according to the battery or battery configuration being serviced.

Correct voltage selection is important to prevent improper charging and potential battery or equipment damage.

Built-In Ammeter

The STM4810 features an ammeter for indicating the instantaneous charging current. This allows technicians to monitor the charging current while the charger is operating.

The ammeter works together with the current adjustor to provide the operator with direct visibility of charging current during battery servicing.

Adjustable Charging Current

The integrated current adjustor allows the charging current to be adjusted according to the individual battery's condition. This is useful when charging batteries with different capacities or when a lower charging rate is required.

The adjustable output also helps the operator avoid unnecessarily applying the maximum 10A charging current when a lower rate is more appropriate.

Electrical Safety Protection

The STM4810 incorporates electrical protection on both the input and output sides. Published specifications identify a 5A input fuse and 15A output MCB.

The operating manual identifies the output MCB as a protection device intended to isolate the load from the charger when a short circuit is detected at the output.

Suitable for Multiple Battery Configurations

Because the STM4810 provides five selectable voltage levels, it can be used with different battery arrangements corresponding to the selected charging voltage. The operating manual identifies the voltage selector as the control used to select the appropriate range according to the battery type being charged.

This multi-voltage capability is useful for professional workshops where technicians may encounter different battery-system voltages during routine maintenance.

Professional Workshop Construction

The STM4810 measures approximately 300mm × 340mm × 330mm and weighs approximately 16.5kg, according to published product specifications.

Its larger cabinet and 10A charging capacity make it suitable for fixed or semi-permanent installation in automotive workshops, battery charging areas and professional service facilities.

Suitable Applications

The SB TOOLS STM4810 can be used for:

  • 6V lead-acid battery charging
  • 12V automotive battery charging
  • 24V battery-system charging
  • 36V battery-system charging
  • 48V battery-system charging
  • Automotive workshop battery servicing
  • Fleet maintenance
  • Commercial vehicle maintenance
  • Battery service centres
  • Garage charging stations
  • General lead-acid battery maintenance
  • Multi-voltage workshop charging applications

The SUPER-LITE charger series is specifically described as suitable for automobile lead-acid battery charging.

Automotive Workshop Applications

The STM4810 is suitable for technicians who regularly work with batteries of different voltage ratings. Instead of using separate chargers for 6V, 12V, 24V, 36V and 48V systems, the STM4810 provides selectable voltage output within one charger.

Typical applications include battery charging during vehicle servicing, fleet maintenance, electrical-system repair, battery recovery procedures and preparation of batteries for further vehicle testing.

Technical Specifications

Specification Details
Product SUPER-LITE Automotive Lead Acid Battery Charger
Model STM4810
Charging Voltage 6V–48V DC
Voltage Selection 6V / 12V / 24V / 36V / 48V
Maximum Charging Current 10 Amp
Charging Current Adjustable
Input Voltage 220–240V AC
Input Frequency 50Hz
Phase Single Phase
Input Protection 5A Fuse
Output Protection 15A MCB
Ammeter Built-In
Current Adjustor Built-In
Dimensions (H × W × D) Approx. 300 × 340 × 330 mm
Weight Approx. 16.5 kg
Battery Type Automotive Lead-Acid Battery

The published electrical specifications and physical dimensions are supported by SUPER-LITE product and operating documentation.

Benefits for Professional Workshops

The SB TOOLS STM4810 6V~48V 10A Battery Charger provides several practical advantages:

  • Wide 6V~48V charging range for multi-voltage applications
  • Five voltage selections: 6V, 12V, 24V, 36V and 48V
  • 10A maximum charging current
  • Adjustable charging current for different battery conditions
  • Built-in ammeter for charging-current monitoring
  • 5A input fuse protection
  • 15A output MCB protection
  • Suitable for automotive lead-acid battery charging
  • Suitable for professional garages and fleet workshops
  • Reduces the need for multiple dedicated battery chargers
  • Practical solution for workshops servicing different battery systems

Safety and Usage Notes

  • Confirm the battery or battery configuration voltage before charging.
  • Select the correct voltage setting: 6V, 12V, 24V, 36V or 48V.
  • Never select a higher charging voltage than the battery system requires.
  • Check battery polarity before connecting the charging cables.
  • Adjust the charging current according to the battery manufacturer's specifications and battery condition.
  • Monitor the ammeter during charging.
  • Ensure adequate ventilation around batteries during charging.
  • Keep sparks, flames and ignition sources away from batteries.
  • Do not operate the charger with damaged cables, plugs, clamps or electrical components.
  • Do not exceed the charger's specified load.
  • Constantly monitor battery condition to help prevent overcharging.

Why Choose STM4810?

The SB TOOLS 6V~48V SUPER-LITE Battery Charger STM4810 combines a wide multi-voltage charging range, 10A maximum output, adjustable charging current, built-in ammeter and electrical protection in one professional workshop charger. Its selectable 6V, 12V, 24V, 36V and 48V settings make it suitable for workshops that need to service multiple lead-acid battery configurations.

SB TOOLS STM4810 is a versatile professional solution for automotive workshops, garages, fleet maintenance facilities and battery service centres requiring a 6V~48V, 10A multi-voltage lead-acid battery charger for regular battery charging and maintenance.



 Inquiry - SB TOOLS 6V~48V SUPER-LITE BATTERY CHAEGER (10AMP) - STM4810