B116, C15 Jalan Haji Ahmad, Perkampungan Seri Setali, 25300 Kuantan, Pahang, Malaysia.

+6019-323 7617

kstoolsdepot@gmail.com


Share:


SB TOOLS 6V~96V SUPER-LITE BATTERY CHAEGER (10AMP) - STM9610



Product Overview

The SB TOOLS 6V~96V SUPER-LITE Battery Charger STM9610 is a professional multi-voltage automotive lead-acid battery charger designed for charging battery systems from 6V up to 96V DC. With a maximum selectable charging current of 10 Amp, the STM9610 provides a versatile solution for automotive workshops, fleet maintenance facilities, garages and professional battery service applications.

The STM9610 operates from a 220–240V AC, single-phase 50Hz mains supply and uses a selectable charging-voltage system for different battery configurations. Its published specifications include an 8A input fuse and 15A output MCB for electrical protection.

Key Features

  • Model: STM9610
  • Series: SUPER-LITE Automotive Lead-Acid Battery Charger
  • Charging Voltage: 6V–96V DC
  • Maximum Charging Current: 10 Amp
  • Charging Current: Selectable / adjustable
  • Input Voltage: 220–240V AC
  • Input Supply: Single Phase, 50Hz
  • Input Protection: 8A Fuse
  • Output Protection: 15A MCB
  • Built-In Ammeter: Yes
  • Current Adjustor: Yes
  • Multi-voltage charging capability
  • Dimensions: Approx. 300 × 340 × 330 mm
  • Weight: Approximately 25 kg

Wide 6V~96V Charging Range

The major advantage of the STM9610 is its wide 6V to 96V DC charging range. It is designed to accommodate multiple lead-acid battery configurations, making it suitable for workshops that handle different battery-system voltages.

The SUPER-LITE documentation identifies the STM9610 as a 6Vdc~96Vdc model with a maximum selectable charging current of 10A. This broad operating range can reduce the need for multiple dedicated chargers for different battery voltages.

10 Amp Selectable Charging Current

The STM9610 provides a maximum charging current of 10 Amp. The charging rate is selectable, allowing the operator to adjust the charging current according to the battery's condition and charging requirements.

The adjustable charging function is particularly useful in professional workshops where batteries of different capacities may be serviced using the same charger.

Multi-Voltage Battery Charging

The STM9610 is designed for battery systems within the 6V to 96V DC range. Published SUPER-LITE documentation describes the product series as supporting multiple-range charging from 6V to 48V or 96V, depending on the model.

This makes the STM9610 suitable for workshops requiring a charger capable of handling a broad range of series-connected lead-acid battery configurations.

Built-In Voltage Selection

The STM9610 uses a voltage-selection system to allow the operator to choose a suitable charging range for the battery or battery configuration. The operating manual for the STM4810/STM4820/STM9610/STM10810 series identifies the voltage selector switch as the control used to select the appropriate charging voltage according to the battery type.

Correct voltage selection is essential before connecting the charger to a battery system.

Built-In Ammeter

The SUPER-LITE STM9610 incorporates an ammeter to indicate the instantaneous charging current. This allows the technician to monitor the current being delivered during the charging process.

The ammeter works together with the current adjustor, providing direct monitoring and adjustment of charging current during workshop battery servicing.

Adjustable Current Control

The built-in current adjustor allows the charging current to be adjusted to suit individual battery conditions. This gives the operator greater control over the charging process rather than operating continuously at the maximum 10A output.

This feature is useful when servicing batteries with different capacities, states of charge or charging requirements.

Electrical Safety Protection

The STM9610 is equipped with dedicated input and output protection. Current SUPER-LITE product specifications identify an 8A input fuse and 15A output MCB.

The operating manual identifies the output MCB as a protection device that isolates the load from the charger when a short circuit is detected at the output.

Professional Workshop Construction

The STM9610 has published dimensions of approximately 300mm × 340mm × 330mm. Its published weight is approximately 25kg, although older technical documentation lists approximately 24kg and some current listings specify 25–26kg.

The larger cabinet is suited to professional workshops and dedicated battery charging areas where a high-range multi-voltage charger is required.

Suitable Applications

The SB TOOLS STM9610 can be used for:

  • 6V lead-acid battery charging
  • 12V automotive battery charging
  • 24V battery-system charging
  • 36V battery-system charging
  • 48V battery-system charging
  • Higher-voltage battery configurations up to 96V
  • Automotive workshop battery servicing
  • Fleet maintenance
  • Commercial vehicle maintenance
  • Battery service centres
  • Garage charging stations
  • Multi-voltage battery maintenance
  • Professional lead-acid battery charging

The SUPER-LITE series is specified for automobile lead-acid battery charging and supports series-connected battery arrangements for multi-voltage charging.

Automotive Workshop Applications

The STM9610 is suitable for automotive technicians and workshop operators who encounter different battery-system voltages. Its 6V~96V charging range allows one charger to service multiple lead-acid battery configurations.

Typical applications include battery charging during vehicle servicing, fleet maintenance, electrical-system work, battery maintenance and preparation of batteries for further testing.

The 10A maximum output provides a practical charging capacity for routine workshop battery servicing, while the adjustable current control allows charging to be matched to the battery being serviced.

Technical Specifications

Specification Details
Product SUPER-LITE Automotive Lead-Acid Battery Charger
Model STM9610
Charging Voltage 6V–96V DC
Maximum Charging Current 10 Amp
Charging Current Selectable / Adjustable
Input Voltage 220–240V AC
Input Frequency 50Hz
Phase Single Phase
Input Protection 8A Fuse
Output Protection 15A MCB
Ammeter Built-In
Current Adjustor Built-In
Dimensions (H × W × D) Approx. 300 × 340 × 330 mm
Weight Approx. 25 kg
Battery Type Automotive Lead-Acid Battery

The principal electrical specifications are supported by current SB TOOLS and SUPER-LITE documentation. Physical weight varies slightly between published catalogues, so approximately 25kg is the safer catalog specification.

Benefits for Professional Workshops

The SB TOOLS STM9610 6V~96V 10A Battery Charger provides several practical advantages:

  • Extremely wide 6V~96V charging range
  • 10A maximum charging current
  • Selectable / adjustable charging current
  • Built-in ammeter for monitoring charging current
  • Suitable for multiple series-connected lead-acid battery configurations
  • 8A input fuse protection
  • 15A output MCB protection
  • Suitable for professional automotive workshops
  • Suitable for fleet and commercial maintenance
  • Reduces the need for multiple dedicated chargers
  • Practical solution for workshops servicing different battery-system voltages

Safety and Usage Notes

  • Confirm the battery or battery configuration voltage before charging.
  • Select the correct charging voltage for the battery system.
  • Never select a higher charging voltage than the battery configuration requires.
  • Check battery polarity before connecting the charging cables.
  • Adjust charging current according to the battery manufacturer's specifications.
  • Monitor the built-in ammeter during charging.
  • Constantly monitor battery condition to help prevent overcharging.
  • Ensure adequate ventilation around batteries during charging.
  • Keep sparks, flames and ignition sources away from batteries.
  • Do not operate the charger with damaged cables, plugs, clamps or electrical components.
  • Do not exceed the charger's specified load.
  • Do not attempt to modify or repair the charger without consulting the manufacturer.

Why Choose STM9610?

The SB TOOLS 6V~96V SUPER-LITE Battery Charger STM9610 combines a very wide multi-voltage charging range, 10A maximum charging capacity, adjustable current control, built-in ammeter and electrical protection in one professional workshop charger. Its 6V~96V DC output range makes it suitable for workshops that service multiple lead-acid battery configurations.

SB TOOLS STM9610 is a versatile professional solution for automotive workshops, garages, fleet maintenance facilities and battery service centres requiring a 6V~96V, 10A multi-voltage lead-acid battery charger for regular battery charging, servicing and maintenance.



 Inquiry - SB TOOLS 6V~96V SUPER-LITE BATTERY CHAEGER (10AMP) - STM9610