The LUTIAN 50KB-2 is a heavy-duty 2-inch diesel water pump designed for agricultural irrigation, garden watering, drainage, water transfer, construction-site dewatering, and general outdoor water supply applications. Powered by a single-cylinder, 4-stroke, air-cooled diesel engine, the 50KB-2 delivers dependable pumping performance without requiring an external electrical power source. It provides a maximum water capacity of approximately 22m³/h, a maximum pump lift of 25m, and a maximum suction head of 7m.
The pump is equipped with 2-inch suction and discharge connections, providing a practical configuration for high-volume water transfer. Its maximum flow rate is listed at 366 L/min, equivalent to approximately 22m³/h. The 25m maximum head allows water to be transferred over considerable vertical elevation, while the 7m maximum suction head provides practical capability for drawing water from a lower water source. Actual flow and head performance will depend on pipe length, pipe diameter, elevation, fittings, water conditions, and system resistance.
The 50KB-2 is powered by the LUTIAN LT170F diesel engine, featuring a 211cc displacement and rated output of 2.5kW / 3.4HP. The single-cylinder, 4-stroke, air-cooled configuration provides a straightforward and durable power source for outdoor pumping applications. The engine is designed for practical operation and fuel efficiency, making the pump suitable for extended agricultural and water-transfer work.
The pump assembly incorporates an aluminium-alloy construction for reduced weight and durability, together with a cast-iron volute impeller. LUTIAN's diesel water pump design also uses a mechanical water seal to help prevent leakage around the pump shaft. The manufacturer's product information describes the series as having durable construction, cast-iron impeller and inner-casing components, aluminium die-cast pump casing, and self-priming capability after the initial priming operation.
With compact dimensions of approximately 535 × 420 × 510mm, the 50KB-2 is designed to remain practical for transportation and installation at different work locations. Depending on the specification source and production variant, the listed net weight is approximately 35–37kg. The pump is therefore suitable for users requiring a diesel-powered 2-inch pump that can be transported between farms, plantations, construction sites, gardens, drainage areas, and other outdoor locations.
KEY FEATURES:
• 2-inch diesel water pump
• 2" suction and 2" discharge ports
• 3.4HP / 2.5kW diesel engine
• 211cc single-cylinder diesel engine
• 4-stroke OHV air-cooled engine
• Maximum flow rate up to 366 L/min
• Maximum capacity approximately 22m³/h
• Maximum pump lift of 25m
• Maximum suction head of 7m
• Durable aluminium-alloy pump construction
• Cast-iron volute impeller
• Mechanical water seal for reliable water sealing
• Low fuel consumption design
• Suitable for continuous outdoor pumping applications
• Independent diesel operation without mains electricity
• Compact and portable construction
• Suitable for agriculture, irrigation, drainage, and construction
TECHNICAL SPECIFICATIONS:
Brand: LUTIAN
Model: 50KB-2
Product Type: Diesel Water Pump
Pump Size: 2"
Suction Port: 2"
Discharge Port: 2"
Engine Type: Single-Cylinder, 4-Stroke, Air-Cooled Diesel Engine
Engine Model: LT170F / LT170FD depending on variant
Fuel Type: Diesel
Displacement: 211cc
Rated Output: 2.5kW / 3.4HP
Rated Speed: 3,000–3,600 RPM depending on specification variant
Maximum Flow Rate: 366 L/min
Maximum Capacity: Approximately 22m³/h
Maximum Pump Lift / Head: 25m
Maximum Suction Head: 7m
Dimensions: Approximately 535 × 420 × 510mm
Net Weight: Approximately 35–37kg
PUMP CONSTRUCTION:
The LUTIAN 50KB-2 is designed with a durable pump housing and internal components suitable for regular water-transfer applications. The aluminium-alloy pump casing helps maintain a practical weight while providing structural durability. The forged/cast-iron volute impeller is designed to withstand normal pumping loads, while the mechanical water seal provides protection against water leakage through the pump shaft area.
DIESEL ENGINE PERFORMANCE:
The LT170F diesel engine provides 2.5kW / 3.4HP of rated power from a 211cc single-cylinder configuration. Its 4-stroke air-cooled design avoids the need for a radiator and coolant system, simplifying operation and routine maintenance. Diesel power also makes the 50KB-2 suitable for remote locations where electrical power may not be available.
WATER PUMP PERFORMANCE:
With a maximum capacity of approximately 22m³/h or 366 L/min, the 50KB-2 is designed for relatively high-volume water transfer. Its 25m maximum head makes it suitable for transferring water to elevated areas, while the 7m maximum suction head allows water to be drawn from sources positioned below the pump. For best performance, the suction hose should be appropriately sized, securely connected, free from air leaks, and fitted with the supplied strainer where applicable.
APPLICATIONS:
The LUTIAN 50KB-2 is suitable for a wide range of water-pumping applications, including:
• Agricultural irrigation
• Plantation irrigation
• Farm water transfer
• Garden and landscape watering
• Pond and tank drainage
• Floodwater removal
• Construction-site dewatering
• General drainage applications
• Water transfer between tanks
• Rural water supply
• Outdoor water pumping
• General industrial and commercial water-transfer work
COMMON USES:
The 50KB-2 can be used to transfer water from ponds, tanks, canals, wells, reservoirs, collection areas, and other suitable water sources. Its diesel engine makes it particularly practical for farms, plantations, construction sites, rural properties, and outdoor work areas where electric-powered pumps may be inconvenient or unavailable.
ACCESSORIES:
Depending on the supplied package and local distributor configuration, accessories may include 2-inch PVC couplings, a PVC suction strainer, and hose clips. Supplied accessories should be confirmed with the seller before purchase, as package contents can vary by market or product batch.
MAINTENANCE:
For reliable long-term operation, check the engine oil level before starting, use clean diesel fuel, inspect the air filter regularly, and follow the recommended engine oil-change intervals. The suction and discharge connections should be checked for leaks, hoses should be inspected for damage or blockage, and the suction strainer should be kept clean. The pump should be properly primed before initial operation and operated according to the manufacturer's instructions.
PRODUCT SUMMARY:
The LUTIAN 50KB-2 2" Diesel Water Pump is a practical high-flow pumping solution powered by a 211cc LT170F diesel engine producing 3.4HP. With a maximum flow rate of approximately 366 L/min, 25m maximum pump lift, and 7m maximum suction head, it is well suited for agricultural irrigation, plantation work, drainage, construction dewatering, and general water-transfer applications. Its durable pump construction, mechanical water seal, air-cooled diesel engine, and independent fuel-powered operation make it suitable for demanding outdoor environments.
Note: Published specifications show some variation between 50KB-2 production/market variants, particularly engine model designation, rated RPM, dimensions, and weight. Confirm the exact specification supplied for the intended unit before installation or purchase.
Inquiry - LUTIAN DIESEL WATER PUMPS - 50KB-2